Community discussions

 
mistry7
Forum Guru
Forum Guru
Topic Author
Posts: 1244
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Static IP Routing

Mon Feb 13, 2012 9:58 am

Hi,

i´m a little bit new in ISPs Business
in the past i uses MLPPP over ADSL and SDSL with static IP-Aadresses on the PPPoE Connections.
No problem to assign Static-IP to Client uses Radius.

But from know on i uses my own System to bundle my Connections.
I hosted a RB1200 in Datacenter, and build EOIP Tunnels to them and uses Bonding-Interface.
The only thing I'm not able to todo is routing static IP to my Client.
I standing at the wall don't seeing the hole.
Provider gives my 62.216.xxx.xxx/25 on hosted Routerboard.

PAST:

---------!
DSL------!.-.-.- PPPoE Connections to ISP (Routerboard 1100)User Manager and PPPoE Server -.-.-.- PPPoE to Clients
---------! with Static IP addresses


Future:
RB1200 at Datacenter -------------Multiple DSL Lines---RB1100------PPPoE to CLients
Bonding Interface has
62.216.xxx.2 62.216.xxx.3
62.216.xxx.1 ist Gateway (ISP)

On Datacenter side i bridged Eth1 and the Logical Interface Bonding together. On my side i assign the IP 62.216.xxx.3 to my RB1100 and it available from the Internet.
DOing NAT to the Bonding Interface works great.
If i bridge Bonding Interface and PPPoE Serveron my side problems start.
if got much problems with PMTU Blackhole.
is there an another way to do this?

thanks for help

mistry7

Who is online

Users browsing this forum: No registered users and 5 guests