Community discussions

MikroTik App
 
mazinsaeed
newbie
Topic Author
Posts: 28
Joined: Wed Oct 16, 2013 4:55 pm

DVR Setup

Sun Sep 07, 2014 1:51 pm

Hi all , I have my new DVR cameras system , also I have my Public IP address , just have a look to the DVR system ports and my setting in my router ..

Image

Image

Image


and this is my router settings

Image

Image

also i put dst port 8000 and in action to port 80

now if i try to use my Public IP address to get access online on : http://xxx.xxx.xxx.xx:8000 , the Mikrotik is forwarding but i couldn't get online view ... my ask is there another setting should i do in my router or my DVR ??
 
CelticComms
Forum Guru
Forum Guru
Posts: 1766
Joined: Wed May 02, 2012 5:48 am

Re: DVR Setup

Sun Sep 07, 2014 2:40 pm

You also need to allow the traffic to the DVR's address in the forward chain.
Interlynx | Networking and Information Security Consultants & Trainers | Email: routerlynx@gmail.com
BGP | EIGRP | OSPF | MPLS | Firewall | VPN | IPsec | Multicast | QOS | IPv4/6 | STP | VLAN | PON | AE | M2M | and more!

 
mazinsaeed
newbie
Topic Author
Posts: 28
Joined: Wed Oct 16, 2013 4:55 pm

Re: DVR Setup

Sun Sep 07, 2014 3:33 pm

You also need to allow the traffic to the DVR's address in the forward chain.

can you tell me how please
 
CelticComms
Forum Guru
Forum Guru
Posts: 1766
Joined: Wed May 02, 2012 5:48 am

Re: DVR Setup

Sun Sep 07, 2014 4:51 pm

Add a filter in IP / Firewall / Filters. It should be on the forward chain and specify the dst address / port as that of your DVR. Set the action to accept. You can also further limit the filter depending on what you want to allow.
Interlynx | Networking and Information Security Consultants & Trainers | Email: routerlynx@gmail.com
BGP | EIGRP | OSPF | MPLS | Firewall | VPN | IPsec | Multicast | QOS | IPv4/6 | STP | VLAN | PON | AE | M2M | and more!

 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 511
Joined: Wed Jan 25, 2012 10:23 am

Re: DVR Setup

Sun Sep 07, 2014 4:58 pm

If you don't know how to make firewall rules in routeros you can enable UPnP.
I see that you DVR supports it.
Enable it in routeros IP -> UPnP, put check mark on Enabled and in Interfaces add which is your internal and which is external interface.

Who is online

Users browsing this forum: No registered users and 12 guests