Community discussions

 
rafalak
just joined
Topic Author
Posts: 3
Joined: Thu Jun 19, 2014 12:05 pm

CCR1016 - no pulls all BGP sessions

Tue Oct 14, 2014 5:10 pm

Hello i have simple network infrastructure
one CCR1016 (alpha) with 3 x eBGP sessions
and another (beta) with 1 x eBGP session

and both combined to iBGP with public ASN

alpha and beta load full prefixes from eBGP peers
beta get all prefixes from alpha
when alpha getting some prefixes sometimes 30-50% suddenly begins to lose and remains at approximately 60

settings iBGP
in Instances
Name - my iBGP
AS - my public ASN from RIPE
(checked) Redistribute Other BGP

in Peers
instance - my iBGP
Remote Address - alpha or beta
Remote AS - my public ASN from RIPE
nexthop choise - default
hold time - 180
ttl - default
in filter - my-ibgp-in
out filter - my-ibgp-out
default originate - default

filters accept, set distance and bgp local pref

where is the problem ?
 
faisali
Member Candidate
Member Candidate
Posts: 179
Joined: Fri Oct 08, 2010 5:11 am

Re: CCR1016 - no pulls all BGP sessions

Mon Oct 20, 2014 4:31 pm

Hello i have simple network infrastructure
one CCR1016 (alpha) with 3 x eBGP sessions
and another (beta) with 1 x eBGP session

and both combined to iBGP with public ASN

alpha and beta load full prefixes from eBGP peers
beta get all prefixes from alpha
when alpha getting some prefixes sometimes 30-50% suddenly begins to lose and remains at approximately 60

settings iBGP
in Instances
Name - my iBGP
AS - my public ASN from RIPE
(checked) Redistribute Other BGP

in Peers
instance - my iBGP
Remote Address - alpha or beta
Remote AS - my public ASN from RIPE
nexthop choise - default
hold time - 180
ttl - default
in filter - my-ibgp-in
out filter - my-ibgp-out
default originate - default

filters accept, set distance and bgp local pref

where is the problem ?
Turn on Client-to-Client Reflection under the default BGP instance on each on the routers.
 
lz1dsb
Member Candidate
Member Candidate
Posts: 222
Joined: Wed Aug 07, 2013 11:48 am

Re: CCR1016 - no pulls all BGP sessions

Tue Oct 21, 2014 10:57 pm

Hello i have simple network infrastructure
one CCR1016 (alpha) with 3 x eBGP sessions
and another (beta) with 1 x eBGP session

and both combined to iBGP with public ASN

alpha and beta load full prefixes from eBGP peers
beta get all prefixes from alpha
when alpha getting some prefixes sometimes 30-50% suddenly begins to lose and remains at approximately 60

settings iBGP
in Instances
Name - my iBGP
AS - my public ASN from RIPE
(checked) Redistribute Other BGP

in Peers
instance - my iBGP
Remote Address - alpha or beta
Remote AS - my public ASN from RIPE
nexthop choise - default
hold time - 180
ttl - default
in filter - my-ibgp-in
out filter - my-ibgp-out
default originate - default

filters accept, set distance and bgp local pref

where is the problem ?
If you're getting full BGP routing tables on both routers... than, it's the Local Preference attribute that will determine which routes will be preferred and eventually enter the local routing table of each router. So, frankly I'm a bit confused...

Who is online

Users browsing this forum: No registered users and 10 guests