Hi guys im using tomas bandwidth based load balance i just want to ask how to mark the packets, im trying to mark the packets but the thing is there's no packet on the LAN SIDE

add action=mark-connection chain=prerouting comment=EPLDT dst-address-list=garena dst-address-type=!local new-connection-mark=mark-conn_EPLDT src-address-list=local-address
add action=mark-packet chain=prerouting connection-mark=mark-conn_EPLDT new-packet-mark=mark-packet_EPLDT
add action=mark-connection chain=prerouting dst-address-list=!Connected dst-address-type=!local dst-port=5000-5500 new-connection-mark=mark-conn_EPLDT protocol=udp src-address-list=local-address
add action=mark-connection chain=prerouting dst-address-list=!Connected dst-address-type=!local dst-port=2099,5222,5223,8393-8400 new-connection-mark=mark-conn_EPLDT protocol=tcp src-address-list=\local-address
add action=mark-routing chain=prerouting connection-mark=mark-conn_EPLDT new-routing-mark=to_PLDT3MB
add action=mark-connection chain=prerouting connection-mark=mark-conn_EPLDT \new-connection-mark=WAN2_STICKY routing-mark=to_PLDT3MB

TIA

Go over Tomas's presentation carefully, you have missed something....