Community discussions

MikroTik App
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 25037
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

CHR feature requests

Wed Aug 31, 2016 2:26 pm

Great to see the huge interest in the CHR RouterOS images.
Please post what you would like to see in the CHR images, or web administration side.
No answer to your question? How to write posts
 
pe1chl
Forum Guru
Forum Guru
Posts: 7734
Joined: Mon Jun 08, 2015 12:09 pm

Re: CHR feature requests

Wed Aug 31, 2016 3:52 pm

- Proper file to easily install it in VMware ESXi without having to fiddle with VMware workstation or other tools.
(either the correct .vmdk file or a .ovf file)

- VMware tools included in the image
 
loopie
just joined
Posts: 1
Joined: Fri Jan 23, 2015 11:02 pm

Re: CHR feature requests

Thu Sep 01, 2016 5:21 pm

Hello,
I would love to see SR-IOV support. Currently (6.36.2) ixgbevf driver is not present. This was mentioned a year ago http://forum.mikrotik.com/viewtopic.php ... &start=100 but so far not implemented.

Jarda
 
savage
Forum Guru
Forum Guru
Posts: 1220
Joined: Mon Oct 18, 2004 12:07 am
Location: Cape Town, South Africa
Contact:

Re: CHR feature requests

Fri Sep 02, 2016 6:15 pm

- Proper file to easily install it in VMware ESXi without having to fiddle with VMware workstation or other tools.
(either the correct .vmdk file or a .ovf file)

- VMware tools included in the image
+1. Biggest reason why I don't use it. Can't be bothered to do 'hacks' to get a system to install...
Regards,
Chris
 
Sob
Forum Guru
Forum Guru
Posts: 6514
Joined: Mon Apr 20, 2009 9:11 pm

Re: CHR feature requests

Fri Sep 02, 2016 8:40 pm

The whole "hack" needed to get ESXi compatible image is just a single command, that's not so bad. But yeah, I don't understand, why MikroTik doesn't use it and release images that would work for everyone without fiddling with anything.
Excessive quoting is useless and annoying. If you use it, please consider if you could do without it.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1965
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Re: CHR feature requests

Sat Sep 03, 2016 12:33 pm

Hello,
I would love to see SR-IOV support. Currently (6.36.2) ixgbevf driver is not present. This was mentioned a year ago http://forum.mikrotik.com/viewtopic.php ... &start=100 but so far not implemented.

Jarda
+1 !!!
Mikrotik MTCNA, MTCRE, MTCINE
http://thebrotherswisp.com/
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Posts: 1229
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: CHR feature requests

Tue Sep 06, 2016 6:11 pm

I would like to see two things:

1st - an ISO install boot image (just like the x86 32-bit ROS).
Where the installer can then select their own size of hard disk.
On a prior CHR I was testing, I ran out of hard disk space when testing packages.

2nd - licensing similar to all other Mikrotik ROS products - instead of a subscription based license.
I would like to license and forget instead of having to track a subscription license.
I hesitate to install any products that use a subscription based license.

I suspect these two feature request could drive up the popularity and install base for all physical and virtual environments and make it much more easy to install/configure.

North Idaho Tom Jones
 
jarda
Forum Guru
Forum Guru
Posts: 7784
Joined: Mon Oct 22, 2012 4:46 pm

Re: CHR feature requests

Sat Sep 10, 2016 10:44 pm

You can set the system disk capacity before first run.
You can buy perpetual license that is even transferable to other chr if you need it in the future.
 
User avatar
karlisi
Member
Member
Posts: 372
Joined: Mon May 31, 2004 8:09 am
Location: Latvia

Re: CHR feature requests

Mon Sep 12, 2016 9:37 am

Support for Citrix XenServer.
---
Karlis
 
miquelmartos
just joined
Posts: 2
Joined: Mon Jan 03, 2011 6:33 pm

Re: CHR feature requests

Tue Sep 13, 2016 2:03 pm

Fix the P10 License, vlans over bonding has a lot of TX drops when use more than 1Mb (unresolved ticket: #2016062166000118). This problem does not affect PUnlimited license.

+1 to ad SR-IOV support!
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 25037
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CHR feature requests

Tue Sep 13, 2016 2:05 pm

Fix the P10 License, vlans over bonding has a lot of TX drops when use more than 1Mb (unresolved ticket: #2016062166000118). This problem does not affect PUnlimited license.

+1 to ad SR-IOV support!
Please make new topics about each issue, do not reply to unrelated posts.
No answer to your question? How to write posts
 
User avatar
hknet
Member Candidate
Member Candidate
Posts: 114
Joined: Sun Jul 17, 2016 6:05 pm
Location: Vienna, Austria
Contact:

Re: CHR feature requests

Sat Oct 08, 2016 6:02 am

Hi,
first of all: loving it ;)

specific to CHR I'd ask for a way to automate deployment, be it to do a dhcp-client-request on the first interface found and get a config file specific for this box by eg requesting a tftp-file based on the mac# of this interface.
and for an easy system-reset a specific reboot-flag with "load default config" would also be nice (doing an autobackup before rebooting just in case).

disk-image-resize-support inside CHR would also be nice, in case one needs to increase the bootdisk.

thank you for this awesome piece of software,
hk
 
sup5
Member
Member
Posts: 342
Joined: Sat Jul 10, 2010 12:37 am

Re: CHR feature requests

Sat Oct 08, 2016 9:21 am

I'd love DNS Request routing. This means that the DNS-Service of RouterOS shall redirect its DNS-Request upon a certain rule set (eg. DNS prefix or suffix) to another DNS Server

Example with Sophos UTM
https://community.sophos.com/kb/de-de/123099

This feature would allow hierachical DNS-Setups with Mikrotik. (any site gets its own DNS-space and its own DNS-server)
 
brotherdust
Member Candidate
Member Candidate
Posts: 118
Joined: Tue Jun 05, 2007 1:31 am

Re: CHR feature requests

Fri Feb 24, 2017 7:00 pm

Hi,
first of all: loving it ;)

specific to CHR I'd ask for a way to automate deployment, be it to do a dhcp-client-request on the first interface found and get a config file specific for this box by eg requesting a tftp-file based on the mac# of this interface.
and for an easy system-reset a specific reboot-flag with "load default config" would also be nice (doing an autobackup before rebooting just in case).

disk-image-resize-support inside CHR would also be nice, in case one needs to increase the bootdisk.

thank you for this awesome piece of software,
hk
I second the notion of being able to automate the deployment. The CHR documentation doesn't say a lot about how the initial spin-up process works. What I'd like to see, from a documentation perspective, is how to customize this process. For instance, I want to run CHR in OpenStack/KVM environment. One of the cool features of this environment is the ability to provide a "configuration drive" that the VM can use during the spin-up process. Ideally, the document would say what file the CHR would be expecting on the drive. Do you realize how cool that would be? =) Right now, it would appear that CHR, by default, has DHCP client configured on ether1; this is well and good, but it's not documented.

Lots of ideas here. Better documentation = better users. =)
 
kharkin0
just joined
Posts: 7
Joined: Wed Mar 01, 2017 2:59 pm

Re: CHR feature requests

Wed Mar 01, 2017 3:17 pm

For now, the thing missing is a 100M licence.
I have 5 pfSense systems I'd like to migrate to CHR, but $45 / VM is a bit too much, especially since VMs are 5EUR / VM and are capable of forwarding <100Mbit/s.

So, say a $10 for 100M would be great. I could be called "p0.1"... :)
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 25037
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CHR feature requests

Wed Mar 01, 2017 3:19 pm

If you don't care about having the latest RouterOS version all the time, your license is free with any speed.
No answer to your question? How to write posts
 
savage
Forum Guru
Forum Guru
Posts: 1220
Joined: Mon Oct 18, 2004 12:07 am
Location: Cape Town, South Africa
Contact:

Re: CHR feature requests

Wed Mar 01, 2017 3:23 pm

If you don't care about having the latest RouterOS version all the time, your license is free with any speed.
HUH?

So running one version back of bugfix, is free? When did that happen? Nothing like this mentioned at https://wiki.mikrotik.com/wiki/Manual:CHR#CHR_Licensing
Regards,
Chris
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 25037
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CHR feature requests

Wed Mar 01, 2017 3:25 pm

If you don't care about having the latest RouterOS version all the time, your license is free with any speed.
HUH?

So running one version back of bugfix, is free? When did that happen? Nothing like this mentioned at https://wiki.mikrotik.com/wiki/Manual:CHR#CHR_Licensing
You can request a trial and it will never stop working. Only upgrading will be not possible after 60 days. It is in the manual.
No answer to your question? How to write posts
 
savage
Forum Guru
Forum Guru
Posts: 1220
Joined: Mon Oct 18, 2004 12:07 am
Location: Cape Town, South Africa
Contact:

Re: CHR feature requests

Wed Mar 01, 2017 3:27 pm

If you don't care about having the latest RouterOS version all the time, your license is free with any speed.
HUH?

So running one version back of bugfix, is free? When did that happen? Nothing like this mentioned at https://wiki.mikrotik.com/wiki/Manual:CHR#CHR_Licensing
You can request a trial and it will never stop working. Only upgrading will be not possible after 60 days. It is in the manual.
Oh... Ok, my bad. I was under the impression the trial stops after 60-days (like ROS and it's 24 hour limit)... That's very interesting :lol:
Regards,
Chris
 
kharkin0
just joined
Posts: 7
Joined: Wed Mar 01, 2017 2:59 pm

Re: CHR feature requests

Wed Mar 01, 2017 3:45 pm

Interesting indeed...

Thank you!
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: CHR feature requests

Fri Mar 17, 2017 8:06 pm

Fastpath/Fasttrack for CHR is pretty much the only thing I'm missing, apart from a more convenient install method (.iso?) for ESXi.
 
dskillin
newbie
Posts: 28
Joined: Mon Mar 06, 2017 5:49 pm

Re: CHR feature requests

Sat Mar 18, 2017 5:12 pm

I've been utilizing on AWS, and some in house testing in vSphere.

When we start talking "cloud", there is an expectation for rapid deployment and scalability. My vote would go to in-house license management, and central deployment/management. I should be able to configure an image to call home, then check out a license from my license pool at spin-up and perhaps some basic configuration options. I should be able to issue licenses to systems which aren't on the internet, and I should be able to do it without providing a singular set of credentials.

A use case:

Deploy CHR on a virtual stack deployed for a customer. The CHR tunnels home, giving management access to the network.

One or two customers, all of the manual intervention required for configuration and licensing is reasonable. Multiply by a number of customers, and a number of sites then you simply have a headache.
 
Kindis
Member
Member
Posts: 393
Joined: Tue Nov 01, 2011 6:54 pm
Location: Sweden

Re: CHR feature requests

Sun Mar 19, 2017 8:03 am

Fastpath/Fasttrack for CHR is pretty much the only thing I'm missing, apart from a more convenient install method (.iso?) for ESXi.
+1 for this and I would also like to get IP Cloud feature.
 
ab0tj
just joined
Posts: 9
Joined: Thu Jun 14, 2007 1:05 am

Re: CHR feature requests

Mon Mar 20, 2017 1:16 am

Cloud DDNS would be nice.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 25037
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CHR feature requests

Mon Mar 20, 2017 11:50 am

Cloud DDNS would be nice.
We already have that. Or you meant something different from the DNS name your device shows in the QuickSet page ?
No answer to your question? How to write posts
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8571
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: CHR feature requests

Mon Mar 20, 2017 3:18 pm

Normis, the topic is about CHR...
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 25037
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CHR feature requests

Mon Mar 20, 2017 3:52 pm

Normis, the topic is about CHR...
ohhh. sorry about that :) it was still early morning when I replied.
No answer to your question? How to write posts
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: CHR feature requests

Mon Mar 20, 2017 4:36 pm

Sooo what about Fastpath on CHR then? :D
 
ab0tj
just joined
Posts: 9
Joined: Thu Jun 14, 2007 1:05 am

Re: CHR feature requests

Mon Mar 20, 2017 4:43 pm

We already have that. Or you meant something different from the DNS name your device shows in the QuickSet page ?
Yes, that :D
Doesn't exist on my CHR, unfortunately.
 
User avatar
jms1
just joined
Posts: 10
Joined: Sun May 19, 2013 6:43 pm
Location: Florida, USA

Re: CHR feature requests

Wed Mar 29, 2017 7:28 am

How about a way to re-trigger the partition resizing, after the first boot?

I'm evaluating using a CHR as a VPN server. I'm hosting it with a VPS with 20 GB disk, however "/system resource print" only shows 128MB. I was able to shut down the CHR and boot the VPS with Finnix to adjust the partition table, however when I reboot normally it still only shows the original 128MB.

Or is there a way to make this happen manually, by mounting one of the partitions and adding or removing a specific flag file?
 
Kindis
Member
Member
Posts: 393
Joined: Tue Nov 01, 2011 6:54 pm
Location: Sweden

Re: CHR feature requests

Wed Mar 29, 2017 9:47 am

How about a way to re-trigger the partition resizing, after the first boot?

I'm evaluating using a CHR as a VPN server. I'm hosting it with a VPS with 20 GB disk, however "/system resource print" only shows 128MB. I was able to shut down the CHR and boot the VPS with Finnix to adjust the partition table, however when I reboot normally it still only shows the original 128MB.

Or is there a way to make this happen manually, by mounting one of the partitions and adding or removing a specific flag file?
This is strange I have extended my disk two times in Hyper-V from 128 MB to 1 GB and then again to 10 GB. All I needed to do is shutdown the CHR, extend the disk and CHR resized the disk during start.
 
User avatar
jms1
just joined
Posts: 10
Joined: Sun May 19, 2013 6:43 pm
Location: Florida, USA

Re: CHR feature requests

Tue Apr 04, 2017 2:11 am

I forgot to add, I did a write-up which details how I resized the filesystem, in case anybody needs it.

https://www.jms1.net/mikrotik/Cloud%20H ... ltr.com.md
 
catalystjmf
just joined
Posts: 10
Joined: Fri Apr 19, 2013 3:54 pm

Re: CHR feature requests

Fri Apr 14, 2017 5:35 am

Mikrotik developers,

I am sure others have explained this, but open-vm-tools is absolutely necessary for CHR. If you are running a CHR it is most likely in a datacenter environment which has zero tolerance for downtime. With vmware tools or open-vm-tools quite a lot that vmware can do with this VM is accomplished. Currently there are several reason that a CHR VM has to be shutdown to perform something simple that would normally be done while the VM is running. Also things like Vmware HA do not function properly because vm tools provides a heartbeat. It just does not make sense that you have built a router "tailored for virtual environments" that can not fully function in a virtual environment...

Thank you!
 
th0massin0
Member Candidate
Member Candidate
Posts: 148
Joined: Sun May 11, 2014 4:16 am
Location: Poland

Re: CHR feature requests

Fri Apr 14, 2017 11:20 am

... or not at all ;) : viewtopic.php?f=15&t=120413
 
PtDragon
Frequent Visitor
Frequent Visitor
Posts: 79
Joined: Sun Apr 26, 2009 8:52 pm

Re: CHR feature requests

Sun Jul 30, 2017 10:28 am

Please add install iso file for CHR!
It would massively easy up life for most of people(no need for separate guides and so on - just install from ISO like nearly any other system and it will work for cases like ProxMox where we don't have actual VM file but have compatible KVM).
CCR1036-12G-4S +6x100Mbit ^_^
 
schadom
Member Candidate
Member Candidate
Posts: 156
Joined: Sun Jun 25, 2017 2:47 am
Location: Austria

Re: CHR feature requests

Wed Aug 02, 2017 3:47 pm

Please add install iso file for CHR!
It would massively easy up life for most of people(no need for separate guides and so on - just install from ISO like nearly any other system and it will work for cases like ProxMox where we don't have actual VM file but have compatible KVM).
+1 for ISO or OVF templates ;-)
 
marrold
Member
Member
Posts: 417
Joined: Wed Sep 04, 2013 10:45 am

Re: CHR feature requests

Fri Aug 04, 2017 6:04 pm

I would like to be able to access the virtual BIOs UUID from within the guest. With QEMU / KVM this is unique per VM.

In a linux guest it can be accessed using dmidecode.

I mentioned it in this thread- viewtopic.php?f=15&t=124230

Thanks
I'm a SIP / VoIP engineer. Feel free to ask questions...
 
chubbs596
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Fri Dec 06, 2013 6:07 pm

Re: CHR feature requests

Fri Oct 20, 2017 2:31 am

Fastpath/Fasttrack for CHR is pretty much the only thing I'm missing, apart from a more convenient install method (.iso?) for ESXi.
+1000 for Fastpath/Fasttrack in CHR
 
Stream
just joined
Posts: 5
Joined: Tue May 03, 2016 1:53 am

Re: CHR feature requests

Fri Oct 20, 2017 10:19 am

+ Support R11e interfaces.
+ Support Trusted Platform Module
+ USB power control.
+ IDS/IPS feature.
+ More VPN clients/servers (Wireguard, openconnect)
+ DNS Server with DNSSEC
+ Support TOR/I2P networks
Last edited by Stream on Fri Oct 20, 2017 3:32 pm, edited 2 times in total.
 
hapi
Member Candidate
Member Candidate
Posts: 225
Joined: Fri Mar 11, 2011 11:21 am
Location: Czech Republic

Re: CHR feature requests

Fri Oct 20, 2017 11:02 am

Fastpath/Fasttrack for CHR is pretty much the only thing I'm missing, apart from a more convenient install method (.iso?) for ESXi.
+1000 for Fastpath/Fasttrack in CHR
With VMXNET3 iface fastpath/fasttrack is ok.
 
User avatar
Hominidae
Member Candidate
Member Candidate
Posts: 133
Joined: Thu Oct 19, 2017 12:50 am

Re: CHR feature requests

Fri Oct 20, 2017 10:02 pm

....this is on my wishlist for CHR:

- support for two-factor-authentication (for a roaming admin) on Web-UI
- post-install script securing the router automatically (disable all services) ...the last time I installed a fresh CHR on a V-Server, the bots were faster than I was able to secure it (took them 2-3secs to get a successful login)
 
pe1chl
Forum Guru
Forum Guru
Posts: 7734
Joined: Mon Jun 08, 2015 12:09 pm

Re: CHR feature requests

Sat Oct 21, 2017 11:02 am

....this is on my wishlist for CHR:

- support for two-factor-authentication (for a roaming admin) on Web-UI
- post-install script securing the router automatically (disable all services) ...the last time I installed a fresh CHR on a V-Server, the bots were faster than I was able to secure it (took them 2-3secs to get a successful login)
Please don't ask for functional changes in this thread - it is only about CHR features!
Running a reset with script for initial installation is already supported!
Besides, a CHR comes up with blank config so you could have been more careful in the sequence of configuration (e.g. set the password before you add a network interface)
 
User avatar
Hominidae
Member Candidate
Member Candidate
Posts: 133
Joined: Thu Oct 19, 2017 12:50 am

Re: CHR feature requests

Sat Oct 21, 2017 7:25 pm

Please don't ask for functional changes in this thread - it is only about CHR features!
Running a reset with script for initial installation is already supported!
Besides, a CHR comes up with blank config so you could have been more careful in the sequence of configuration (e.g. set the password before you add a network interface)
I am not a native english speaker and a mikrotik novice, so bear with me, but I am not asking for functional changes - as you put it - but specifically for adding these features permanently to CHR only.
With CHR I am not referring to any hardware based model, but to the x86-platform based, software images only, to be used in cloud installations.
I am using mine on v-servers.
So I'd gather this is the right thread for my request..

The info on running a reset with a script for initialization is nice to hear and I will look into that employing that with a CHR install (not after a reset).
However, my personal experience is, that the images come up with an interface *enabled* after the install. Hence my request.
 
th0massin0
Member Candidate
Member Candidate
Posts: 148
Joined: Sun May 11, 2014 4:16 am
Location: Poland

Re: CHR feature requests

Thu Nov 02, 2017 4:41 pm

VirtIO SCSI support, please, ASAP: viewtopic.php?f=15&t=124905&p=626094#p626094
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 548
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: CHR feature requests

Fri Nov 03, 2017 8:44 pm

VirtIO SCSI support, please, ASAP: viewtopic.php?f=15&t=124905&p=626094#p626094
+1
 
krokokot
just joined
Posts: 1
Joined: Tue Feb 06, 2018 3:06 am

Re: CHR feature requests

Tue Feb 06, 2018 3:17 am

VirtIO SCSI support, please, ASAP: viewtopic.php?f=15&t=124905&p=626094#p626094
+100500

For example - cheapest and great hetzner[dot]cloud (no advertising, just fact) support only virtio-scsi disk. Fu#ked with 6.42RC15 - 6.42RC18 - 6.42RC20 in this cloud provider tonight. Not working... Please, make us happy...
 
iwikus
newbie
Posts: 26
Joined: Sat Jun 16, 2007 9:55 am

Re: CHR feature requests

Thu Feb 08, 2018 11:44 am

Hi,
another +1 for virtio-scsi driver. It should not bee so hard to add it.

Hetzner cloud for example is using virtio-scsi.
 
fibernet4u
newbie
Posts: 40
Joined: Sat Dec 03, 2016 12:44 pm

Re: CHR feature requests

Thu Feb 08, 2018 2:02 pm

Dear Normis & Rest Team,
Kindly assist me with below issue, which tested on CHR on cloud and same result with Netwatch.


viewtopic.php?f=2&t=130587&p=641235#p641235
 
pabloalbea
just joined
Posts: 1
Joined: Fri Feb 16, 2018 5:23 pm

Re: CHR feature requests

Fri Feb 16, 2018 7:53 pm

I would like to see a feature that allows to assign the same MAC address of the CHR vnic to de VRRP virtual interface, so you don't have to activate promiscuous mode in the vswitch (or port group) for VRRP to work in VMware vSphere.
I saw that feature on Cisco with the "standby use-bias" command and in vyos not using the rfc3768-compatibility command.
With promiscuous mode activated I have performance problems and packets duplication.

References:
https://supportforums.cisco.com/t5/othe ... -p/2720356
https://supportforums.cisco.com/t5/lan- ... -p/2686459
https://forum.vyos.net/showthread.php?tid=26561
 
essmat738
just joined
Posts: 7
Joined: Tue Jan 08, 2019 7:59 am

Re: CHR feature requests

Tue Jan 08, 2019 6:15 pm

Fastpath/Fasttrack for CHR is pretty much the only thing I'm missing, apart from a more convenient install method (.iso?) for ESXi.
+1
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Posts: 1229
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: CHR feature requests

Thu Jan 10, 2019 6:27 pm

CHR feature request

--> Mikrotik , I could really use an ISO image of a CHR so that I can install CHR on a bare metal box (just like x86 ROS).

Info :

- x86 ROS is available as an ISO that can be installed on a bare metal box. All CPU's are available to the x86 ROS system. The problem is that it is 32-Bit

- CHR ROS (64-bit) is only available as a disk image to be copied into a hypervisor system ( in my case a VmWare ESXi hypervisor ). The problem is that there are no free and popular hypervisors (that I know of) that will present greater than eight ( 8 ) CPUs to the guest hosted CHR ROS system. So your options are 1, use 8 CPUs on your CHR or 2, purchase a very expensive hypervisor license ( 100 K ? or so ) so that the hypervisor can then permit a CHR to run with greater than 8 CPUs. Example - a high end bare metal box with two Xeon 56 core processors could yield 112 Xeon processors to a CHR (without hyper-threading enabled). - - - Now you could have as many firewall rules and connections as you want and probably almost never bog down the layer-3 throughput. Also , a bare metal CHR with two Intel® Xeon® Processor E7-8890 v4 processors would yield 24 CPU cores and 120 Meg of CPU cache - thus a CHR could run at full CPU cache clock speed instead of the slower RAM speed for crazy fast CHR throughput.


In my network, I have a CHR with multiple 10-Gig interfaces performing bandwidth management on a dozen class C networks to customers averaging up to almost 150 thousand firewall connections. I suspect a bare metal CHR would increase firewall bandwidth processing yielding an additional 500 to 1,000 percent (or greater) CHR throughput.
 
pe1chl
Forum Guru
Forum Guru
Posts: 7734
Joined: Mon Jun 08, 2015 12:09 pm

Re: CHR feature requests

Thu Jan 10, 2019 8:16 pm

Can't you just boot from a Linux Live CD and then use that to dd the disk image to the physical disk?
 
User avatar
raystream
Frequent Visitor
Frequent Visitor
Posts: 67
Joined: Tue Mar 20, 2018 6:56 pm
Location: Germany
Contact:

Re: CHR feature requests

Fri Jan 11, 2019 8:53 am

you cant just copy the image to a disk. it is a container for the hypervisor and uses only virtual devices without drivers for the baremetal server.

But you are talking about using a server with so much cores and ram and cant afford an esc licence for around 800€ per CPU?
The Server is abaout 3000€ with 2 sockets just add 1600€ esx licence.
if you are running a business this should not be a problem.
----------
WASN
Wide Area Sensor Network

www.wasn.eu
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Posts: 1229
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: CHR feature requests

Fri Jan 11, 2019 6:20 pm

My thoughts on possible methods to get CHR running on a bare metal box . . .

- I believe a CHR does have IDE drivers to directly manage/talk to an IDE hard disk controller and IDE drives. I'm pretty sure a CHR does not have any SCSI, SAS, SATA support/drivers. Sooo #1 a bare metal box might have to be IDE hard disk based.

- CHR does have support for Intel E1000e and E1000 network cards. FYI - there are no physical vmxnet-3 network cards , all vmxnet-3 ethernet interfaces only live in a virtual world. Sooo #2 a bare metal box might have to have Intel E1000e and/or Intel E1000 physical network card interfaces.

Building a physical bare metal box with IDE drives and Intel E1000e networks cards at this point is pretty easy.
The hard part is moving a virtual CHR file system on a virtual IDE disk drive to a physical bare metal IDE hard disk drive and keeping the boot information and CHR linux file system identical so that a CHR ROS system can boot on the bare metal system. This procedure is slightly beyond my knowledge at this time.

However , I do know that a virtual CHR file system can be mounted under a virtual Linux system. I have done this with both 32-Bit x86 ROS and 64-Bit CHR ROS. I've already done this a couple of times to examine the Mikrotik x86/CHR Linux file systems on some virtual ROS systems. What I don't know is a possible procedure to dd a CHR virtual file system to a physical IDE hard disk and what may be needed to get it to boot on the physical bare metal box. I am guessing this should be an easy process to follow if a person was to follow some instructions.

With all of the above teckie steps to attempt to get a CHR running on bare metal, I can only assume it would be much much much easier if Mikrotik just came out with a CHR ISO so that it would be easy to install CHR on a bare metal system (just like x86).

Had anybody ever attempted building a bare metal CHR ?
 
enzain
just joined
Posts: 23
Joined: Wed Jan 17, 2018 9:15 pm

Re: CHR feature requests

Wed Jan 30, 2019 10:52 am

Why not possible use hw ROS with CHR licensing model?

This is not correct.

I can give wh and install free ESXi, and use CHR, why Mikrotik can't just change licensing model?
 
cdstg
just joined
Posts: 10
Joined: Thu Sep 12, 2019 4:15 am

Re: CHR feature requests

Fri Oct 04, 2019 2:44 pm

I also want or should I say need this dhcp-client-request does not work form me :-(
I want to at least get the IP Address added and maybe a password

Nut if I can get the IP address added to can use API to do everything else

thanks


Hi,
first of all: loving it ;)

specific to CHR I'd ask for a way to automate deployment, be it to do a dhcp-client-request on the first interface found and get a config file specific for this box by eg requesting a tftp-file based on the mac# of this interface.
and for an easy system-reset a specific reboot-flag with "load default config" would also be nice (doing an autobackup before rebooting just in case).

disk-image-resize-support inside CHR would also be nice, in case one needs to increase the bootdisk.

thank you for this awesome piece of software,
hk
I second the notion of being able to automate the deployment. The CHR documentation doesn't say a lot about how the initial spin-up process works. What I'd like to see, from a documentation perspective, is how to customize this process. For instance, I want to run CHR in OpenStack/KVM environment. One of the cool features of this environment is the ability to provide a "configuration drive" that the VM can use during the spin-up process. Ideally, the document would say what file the CHR would be expecting on the drive. Do you realize how cool that would be? =) Right now, it would appear that CHR, by default, has DHCP client configured on ether1; this is well and good, but it's not documented.

Lots of ideas here. Better documentation = better users. =)
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 766
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: CHR feature requests

Wed Jun 10, 2020 3:18 am

Hello,
I would love to see SR-IOV support. Currently (6.36.2) ixgbevf driver is not present. This was mentioned a year ago http://forum.mikrotik.com/viewtopic.php ... &start=100 but so far not implemented.

Jarda
Where are we at with this?
-----
Mike Hammett

The Brothers WISP
 
wpeople
Member
Member
Posts: 367
Joined: Sat May 26, 2007 6:36 pm

Re: CHR feature requests

Sat Jun 20, 2020 11:39 am

still no support for...
Hello,
I would love to see SR-IOV support. Currently (6.36.2) ixgbevf driver is not present. This was mentioned a year ago http://forum.mikrotik.com/viewtopic.php ... &start=100 but so far not implemented.

Jarda
Where are we at with this?
 
pe1chl
Forum Guru
Forum Guru
Posts: 7734
Joined: Mon Jun 08, 2015 12:09 pm

Re: CHR feature requests

Sat Jun 20, 2020 12:24 pm

Maybe in the v7 beta? (I did not check)
 
FurfangosFrigyes
just joined
Posts: 20
Joined: Sun Feb 25, 2018 11:45 am

Re: CHR feature requests

Sat Jun 20, 2020 1:28 pm

We are using CHR in Microsoft Azure and it would be nice if the Mikrotik image can be used thru Azure Marketplace.

The second missing feature is the Azure Guest OS diagnostic agent that can provide integration with Azure services like Site recovery and VM backup.
 
parham
Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Sun Feb 15, 2015 11:35 pm

Re: CHR feature requests

Wed Nov 25, 2020 10:05 am

Hey 👋, as vmware has released esxi for raspberry pi, can we have CHR for that please.
 
fgor09
just joined
Posts: 5
Joined: Mon Dec 28, 2020 2:49 am

Re: CHR feature requests

Tue Jan 05, 2021 4:44 pm

Good day.
On the web administration side, you need to create a home page - dashboard!
On the dashboard, you need to place graphical information on the CPU, RAM, device uptime, temperature, etc., status and loading of interfaces and log windows with the last 10 errors.

Can this be done as an extra package? And how much will that cost?

---
Sorry for google translate
 
pe1chl
Forum Guru
Forum Guru
Posts: 7734
Joined: Mon Jun 08, 2015 12:09 pm

Re: CHR feature requests

Wed Jan 06, 2021 12:25 pm

You can do it with Winbox... i.e. you can start Winbox, open the things you want to see in separate subwindows, arrange them how you like, and save that session.
The next time you start Winbox and connect that router, it will come back with that view immediately.
There are some possible tricks to share that saved session among different devices, or to start a new session with that specific saved session.
(however you would have to be careful not to modify it)

This is not available in the web interface. You could write your own software that runs on a separate web server and that uses API to retrieve the information from the device and puts it on a webpage in the layout you wish.
 
fgor09
just joined
Posts: 5
Joined: Mon Dec 28, 2020 2:49 am

Re: CHR feature requests

Wed Jan 06, 2021 10:10 pm

Well, maybe the developers will see my post and agree to write such a page ( Dashboard ) for some amount of bucks?
 
pe1chl
Forum Guru
Forum Guru
Posts: 7734
Joined: Mon Jun 08, 2015 12:09 pm

Re: CHR feature requests

Wed Jan 06, 2021 10:34 pm

Well, maybe the developers will see my post and agree to write such a page ( Dashboard ) for some amount of bucks?
I have never seen developers on this forum engage in such activity... does not mean it never happens, of course.
But I think it would be better to contact the sales department about it. They can probably tell you what is possible to do when you pay for it.
 
fgor09
just joined
Posts: 5
Joined: Mon Dec 28, 2020 2:49 am

Re: CHR feature requests

Fri Jan 08, 2021 6:42 pm

I do not understand.
If there are no developers here, then why this topic?

Where exactly is it better to write my ideas so that developers can see them?
---
Soory for Google translate
 
pe1chl
Forum Guru
Forum Guru
Posts: 7734
Joined: Mon Jun 08, 2015 12:09 pm

Re: CHR feature requests

Fri Jan 08, 2021 7:07 pm

Of course this is a feature request topic, but when your request is "please implement this for some bucks" it is more like a sales case.
When talking to developers here, it is quite apparent that requests that come via sales have quite some more priority than "nice to have" requests here on the forum.
And when you are prepared to pay, that seems like a valid request to send via sales.
 
catalystjmf
just joined
Posts: 10
Joined: Fri Apr 19, 2013 3:54 pm

Re: CHR feature requests

Mon Feb 15, 2021 10:01 pm

Ability to adjust ring buffer size.
 
f38eb
just joined
Posts: 16
Joined: Sat Aug 18, 2012 9:36 pm

Re: CHR feature requests

Wed Jun 09, 2021 5:58 pm

Hey 👋, as vmware has released esxi for raspberry pi, can we have CHR for that please.
+1

Is there any place to vote for feature requests? :)
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 5768
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: CHR feature requests

Wed Jun 09, 2021 6:00 pm

if is esxi, you can use the same image as regular esxi.... what are the problem?
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 2051
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: CHR feature requests

Wed Jun 09, 2021 6:31 pm

Are you sure that x86 VM image works without any problems on arm architecture? No speed penalty?
Real admins use real keyboards.
To quote or not to quote, there is the topic: viewtopic.php?f=2&t=168474
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 5768
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: CHR feature requests

Wed Jun 09, 2021 7:39 pm

Are you sure that x86 VM image works without any problems on arm architecture? No speed penalty?
I know, if I'm not wrong, ARM is more faster than x86....
 
User avatar
inteq
Member Candidate
Member Candidate
Posts: 284
Joined: Wed Feb 25, 2015 8:15 pm
Location: Romania

Re: CHR feature requests

Thu Jul 15, 2021 10:34 am

Just discovered that my CHR unlimited license was not updating/renewing. Who knows for how long this has been going on.
Support fixed it after two days and stated the problem was on MT's end.
Would be nice to get a warning in Winbox about license issues. Never crossed my mind to check the license status. Clicked it by mistake and noticed the tick on "Limited upgrades".
Now I have another thing to worry about.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8571
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: CHR feature requests

Thu Jul 15, 2021 3:07 pm

Well, expired license means you cannot upgrade ROS version. The router itself continues to work just as before.
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
inteq
Member Candidate
Member Candidate
Posts: 284
Joined: Wed Feb 25, 2015 8:15 pm
Location: Romania

Re: CHR feature requests

Sat Jul 24, 2021 6:26 am

Well, expired license means you cannot upgrade ROS version. The router itself continues to work just as before.
Support stated the same, nevertheless, I do not agree.
At least one function did not work while the problem was active, so who knows what other functions are disabled?
I only checked IP/Cloud "Update time" and that gave me a warning that my trial has expired or something along the lines and could not be enabled.
 
pe1chl
Forum Guru
Forum Guru
Posts: 7734
Joined: Mon Jun 08, 2015 12:09 pm

Re: CHR feature requests

Sat Jul 24, 2021 11:47 am

I'm not sure if it would have worked OK when you had enabled it before the license expired and then no longer touched it.
However, IP->Cloud->Update time is not something you would want to use anyway. It is often quite inaccurate.
Just configure NTP server(s) in System->SNTP servers. When you do not have a local NTP server you can enter DNS name pool.ntp.org
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8571
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: CHR feature requests

Mon Jul 26, 2021 6:26 pm

At least one function did not work while the problem was active, so who knows what other functions are disabled?
I only checked IP/Cloud "Update time" and that gave me a warning that my trial has expired or something along the lines and could not be enabled.
Correct, I meant all the local functions which should work. Cloud functions definitely stop working
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.

Who is online

Users browsing this forum: No registered users and 7 guests