Hi, I started studying routeros, so I have a couple of questions to ask:
1) Which version of Routeros do I prefer to use gns3? Routeros x86 img with qemu? Cloud Hosted Router with qemu / vmware?
2) I used the os x86 x86 image, launching it with the following command: "qemu-system-i386w.exe mikrotik.img -m 256 -enable-kvm -net none -boot dc: \ images \ mikrotik-6.28. Big, then i have imported in gns3, with linked vm mode.
When i use the command: "/interface print detail" on every router i have always the same MAC ADDRESS on ethernet1 interface:
exemple:
[admin@MikroTik] > /interface print detail
Flags: D - dynamic, X - disabled, R - running, S - slave
0 R name="ether1" default-name="ether1" type="ether" mtu=1500
actual-mtu=1500 mac-address=52:54:00:12:34:56 fast-path=no
last-link-up-time=jun/11/2017 11:58:02 link-downs=0
1 R name="ether2" default-name="ether2" type="ether" mtu=1500
actual-mtu=1500 mac-address=00:2B:C8:D0:DC:01 fast-path=no
last-link-up-time=jun/11/2017 11:58:02 link-downs=0
2 R name="ether3" default-name="ether3" type="ether" mtu=1500
actual-mtu=1500 mac-address=00:2B:C8:D0:DC:02 fast-path=no
last-link-up-time=jun/11/2017 11:58:03 link-downs=0
3 R name="ether4" default-name="ether4" type="ether" mtu=1500
actual-mtu=1500 mac-address=00:2B:C8:D0:DC:03 fast-path=no
last-link-up-time=jun/11/2017 11:58:03 link-downs=0
4 R name="ether5" default-name="ether5" type="ether" mtu=1500
actual-mtu=1500 mac-address=00:2B:C8:D0:DC:04 fast-path=no
last-link-up-time=jun/11/2017 11:58:03 link-downs=0
on the second router:
[admin@MikroTik] > /interface print detail
Flags: D - dynamic, X - disabled, R - running, S - slave
0 R name="ether1" default-name="ether1" type="ether" mtu=1500
actual-mtu=1500 mac-address=52:54:00:12:34:56 fast-path=no
last-link-up-time=jun/11/2017 11:49:52 link-downs=0
1 R name="ether2" default-name="ether2" type="ether" mtu=1500
actual-mtu=1500 mac-address=00:2B:C8:C5:96:01 fast-path=no
last-link-up-time=jun/11/2017 11:49:53 link-downs=0
2 R name="ether3" default-name="ether3" type="ether" mtu=1500
actual-mtu=1500 mac-address=00:2B:C8:C5:96:02 fast-path=no
last-link-up-time=jun/11/2017 11:49:53 link-downs=0
3 R name="ether4" default-name="ether4" type="ether" mtu=1500
actual-mtu=1500 mac-address=00:2B:C8:C5:96:03 fast-path=no
last-link-up-time=jun/11/2017 11:49:53 link-downs=0
4 R name="ether5" default-name="ether5" type="ether" mtu=1500
actual-mtu=1500 mac-address=00:2B:C8:C5:96:04 fast-path=no
last-link-up-time=jun/11/2017 11:49:54 link-downs=0
why on ethernet1 interface i have always same mac address ? it's normal ?
Do I have to change it?
Can I use it without problems?
thanks