Community discussions

 
zaidm1988
just joined
Topic Author
Posts: 7
Joined: Sun Mar 04, 2018 12:51 pm

CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Tue Mar 06, 2018 9:14 am

hi every body
i have i problem in my chr
when i run bandwidth test tx still on 1119 or less but rx work normally and the traffic up to 10G
i test that on sfp 10G
i test that on bonding
and i open ticket with mikrotik support before 4 days without any response
Image

Pic
https://drive.google.com/open?id=1moym6 ... hDaVHtCklj


note
my license P10 95$
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Tue Mar 06, 2018 1:36 pm

Btest is single threaded so it can not describe the routing performance of the device. If you would like to test the performance, use two devices on sides as traffic generators and put tested equipment in the middle of them.
 
zaidm1988
just joined
Topic Author
Posts: 7
Joined: Sun Mar 04, 2018 12:51 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Wed Mar 07, 2018 2:43 pm

thanks for your replay

i put it in real traffic but i see the same issue TX traffic down
 
User avatar
Steveocee
Forum Guru
Forum Guru
Posts: 1110
Joined: Tue Jul 21, 2015 10:09 pm
Location: UK
Contact:

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Thu Mar 08, 2018 1:12 pm

Have you registered the CHR to your account? It has a limitation if it is installed and not activated to a MikroTik account.
Steve "Steveocee" Carter
PC Gamer, Airsofter, MikroTik Nerd
My Website - My MikroTik Tutorials
 
User avatar
TomjNorthIdaho
Forum Veteran
Forum Veteran
Posts: 990
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Fri Mar 09, 2018 7:34 am

Btest is single threaded so it can not describe the routing performance of the device. If you would like to test the performance, use two devices on sides as traffic generators and put tested equipment in the middle of them.
btest on a chr with a 10-gig network card will do 9.999 Gig through the network to another physical box
btest on a chr to another chr hosted on the same hypervisor (with mnxnet3 ) will hit 17 to 19+ gig or more depending on the physical hardware

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Veteran
Forum Veteran
Posts: 990
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Fri Mar 09, 2018 7:36 am

Have you registered the CHR to your account? It has a limitation if it is installed and not activated to a MikroTik account.
Yup - if not a licensed CHR - it will run sllooowwww ( 1 or 2 meg max I think )
 
zaidm1988
just joined
Topic Author
Posts: 7
Joined: Sun Mar 04, 2018 12:51 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Sat Mar 10, 2018 9:14 am

thnx for all

my CHR license P10 and only limit on TX or RX on both i install CHR on
esxi un limited core
my vm
64 core
128 Ram
i have 3 network card i try E1000-E100e-vmnex3
2 SFP+ HP card
4 Ethernet 1G each interface
builtin card hp 4 Ethernet two interface 1G and two interface 10G
I have a problem with each traffic more than 1G
 
zaidm1988
just joined
Topic Author
Posts: 7
Joined: Sun Mar 04, 2018 12:51 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Sat Mar 10, 2018 9:26 am

Image
 
zaidm1988
just joined
Topic Author
Posts: 7
Joined: Sun Mar 04, 2018 12:51 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Sat Mar 10, 2018 9:54 am

i want 10G up&down per interface

p10
p10 (perpetual-10) license level allows CHR to run indefinitely. It is limited to 10Gbps upload per interface. All the rest of the features provided by CHR are available without restrictions. It is possible to upgrade p10 to p-unlimited After the upgrade is purchased the former license will become available for later use on your account.
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Sat Mar 10, 2018 10:35 am

Isn't one core exhausted by btest? Really, do not use btest instead real traffic generator. Do not bother tested device by running btest.
 
zaidm1988
just joined
Topic Author
Posts: 7
Joined: Sun Mar 04, 2018 12:51 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Sat Mar 10, 2018 12:12 pm

i check it with real traffic and same issue
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Sat Mar 10, 2018 12:34 pm

I am not able to see your picture in necessary details. Cannot say more than that. Have you checked the cpu?
 
zaidm1988
just joined
Topic Author
Posts: 7
Joined: Sun Mar 04, 2018 12:51 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Sat Mar 10, 2018 1:09 pm

 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: CHR tx limit on 1199M rx limit up to 9G install on esxi 6

Sat Mar 10, 2018 4:16 pm

What is on the way between those two devices? How their processors look like during that load? How this device look like when the traffic generators are neighbouring pushing the traffic through? And don't use btest if you would like to get serious results.

Who is online

Users browsing this forum: No registered users and 3 guests