Community discussions

MikroTik App
 
gimpeltik
just joined
Topic Author
Posts: 5
Joined: Tue Nov 28, 2017 4:13 pm

( o˘◡˘o) ┌iii┐ AWS Mikrotik RouterOS CHR 6.42.1 with ENA support avalible on AWS Community

Sun May 20, 2018 11:14 pm

Hello (´• ω •`)ノ
In the last week, I found that there is no option to use Official CHR RouterOS 6.34.1 from AWS Marketplace to setup it on c5 instance types with 10Gbps or 25Gbps
Even after update to the last version of CHR, you will have issues to enable ENA in AWS CLI Console due to AWS Marketplace restrictions of the image
But Mikrotik CHR Changelog from 6.42 (2018-Apr-13) says that ENA Driver enabled in the 6.42 version https://mikrotik.com/download/changelog ... c9d6740882
The Elastic Network Adapter (ENA) supports network speeds of up to 25 Gbps for supported instance types.

I created a new Amazon Web Services Image (AMI) from RAW image of Mikrotik RouterOS CHR 6.42.1 with enabled ENA Support *

AMI ID: ami-b467f9cb
Link to Launch the image: https://console.aws.amazon.com/ec2/v2/h ... i-b467f9cb
The Image available only on eu-east-1 region, but you can always copy it to a different region
Login: admin (without passowrd)


* ENA - Enhanced Networking with the Elastic Network Adapter

Enhanced networking uses single root I/O virtualization (SR-IOV) to provide high-performance networking capabilities on supported instance types. SR-IOV is a method of device virtualization that provides higher I/O performance and lower CPU utilization when compared to traditional virtualized network interfaces. Enhanced networking provides higher bandwidth, higher packet per second (PPS) performance, and consistently lower inter-instance latencies.

* More about ENA: https://docs.aws.amazon.com/AWSEC2/late ... g-ena.html


Now you can start using Mikrotik RouterOS CHR on AWS Instance types like C5, C5 with instance storage, F1, G3, H1, I3, m4.16xlarge, M5, P2, P3, R4, and X1

Follow me on Twitter: https://twitter.com/gimpeltweet
Please, provide some feedback here or better to Twitter

In a few days, I will write a post on how to upload RAW CHR image to AWS and create a Mikrotik instance with ENA
Thank you ( ̄▽ ̄)ノ

P.S take a look to my another my post "Let's Encrypt + Mikrotik RouterOS": viewtopic.php?f=1&t=92673&start=50#p630114

UPD 27-05-2018: I changed the permission of the AMI so now you can copy AMI to different AWS Regions
UPD 27-05-2018: Start the AMI as t2.micro for the first time, then you can change the type to a different one
UPD 28-05-2018: I found that the image doesn't work with c4.large types - but works perfectly on c5/m5 types
 
User avatar
leoservices
Trainer
Trainer
Posts: 169
Joined: Fri Jan 13, 2012 2:20 am
Location: Belo Horizonte - MG - Brazil
Contact:

Re: ( o˘◡˘o) ┌iii┐ AWS Mikrotik RouterOS CHR 6.42.1 with ENA support avalible on AWS Community

Tue Jun 05, 2018 12:46 am

Very good!

I have not needed so much band yet
 
HaPe
Member Candidate
Member Candidate
Posts: 239
Joined: Fri Feb 10, 2012 10:24 pm
Location: Poland

Re: ( o˘◡˘o) ┌iii┐ AWS Mikrotik RouterOS CHR 6.42.1 with ENA support avalible on AWS Community

Tue May 05, 2020 1:38 am

Hello,

how do you create AMI? After changing AZ the instance doesn't have access to the network...

Who is online

Users browsing this forum: No registered users and 12 guests