Community discussions

 
plisken
Forum Guru
Forum Guru
Topic Author
Posts: 2409
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

VLAN configuration with 3 Grooves

Mon Jul 23, 2018 5:35 pm

I have a rb 2011 with 3 vlans.
200, 300, 400.
I want to extend the vlans to an RB750 with a trunk port ether1. So far is good but

The 3 VLANS for 3 networks must be broadcast on every Groove.
How should this configure.
=> ether1 = trunk
RB2011 => trunk vlan200, vlan300, vlan 400 => RB750up => Groove1 with 3 SSID's on ether2
=> Groove2 with 3 SSID's on ether3
=> Groove3 with 3 SSID's on ether4

Who is online

Users browsing this forum: No registered users and 5 guests