Community discussions

 
OlivierL
just joined
Topic Author
Posts: 6
Joined: Mon Oct 31, 2016 4:32 pm

CHR: Duplicate default-name on interfaces

Fri May 31, 2019 3:45 pm

Hi,

I have a CHR instance running on one of the production servers of my company.
It has 3 interfaces: 2 of these are mapped to physical ethernet ports (WAN and LAN), the third one is a virtual port on the hypervisor to communicate with the other VMs.
I should add that everything is working as expected.

When exporting the RouterOS configuration, I end up with something that looks incorrect to me:
/interface ethernet
set [ find default-name=ether1 ] name=ether1_localnet
set [ find default-name=ether1 ] name=ether2_vminternal
set [ find default-name=ether1 ] name=ether3_wan
(...)
As you can see, the 3 interfaces have the same default-name.
I was expecting to use this configuration to set-up another CHR, but although I have not tried yet, I suspect that it will not work.

Do you know if that could be an issue and how to solve it?

Thanks
 
sid5632
Member
Member
Posts: 349
Joined: Fri Feb 17, 2017 6:05 pm

Re: CHR: Duplicate default-name on interfaces

Sun Jun 02, 2019 3:01 am

You didn't even say which version you are running...

Who is online

Users browsing this forum: No registered users and 5 guests