We have a CHR running in one of our Amazon VPC's
CHR ip configured as follows
10.4.121.130 /24 on one subnet within the VPC
IP has elastic IP of PIP1
10.4.0.183 on 10.4.0.128/26CIDR this subnet has a NAT Gateway on 10.4.0.135 and public ip of PIP2
I have established an IPSEC Tunnel from aout on premise Meraki Firewall connected via PIP!1 to 10.4.121.130 or Ether1
We have a requirement ot send traffic for 2 public IP addresses only from the local lan (10.100.16.0/20) through the tunnel and out Ether2 (10.4.0.184) and to the nat Gatewy on 10.4.0.135 and onto the oublic internet so it appears to have come from PIP2.
Can anyone suggest what is required to configure on the Mikrotik to allow this?