How do you managed to get the CHR Interface recognize 10GB speed on the HYPERV?
I installed 1 Intel X540 dual 10GB PCIx card and when i bandwidth test it only reaches to almost 500Mbps and 300Mbps from CHR to other Mikrotiks that i have with 10Gb Connectivity
I have attached print screens on this message.
IIRC, disabling TSO did afford us a marginal speed boost. The idea as explained to me was that the hypervisor was utilizing this on the physical cards while providing a virtual instance to the router inside. In essence, optimization was being performed twice, both on the physical layer/interface cards, and virtually on the virtual network interfaces. I want to say it was around 2-50 Mb/s worth of throughput gain while doing link saturation tests on 40Gb/s interfaces.
In our testing, even though the router was capable of receiving upwards of 30Gb/s on an interface, no matter the Hypervisor, they wouldn't transmit more than 10Gb/s on a single interface. As such we have stopped deploying CHRs in our network and opted for a different vendor on our edges. We use Mikrotik at every site, but don't rely on CHR anymore for major traffic.
You do not have the required permissions to view the files attached to this post.