Hello all. I have CHR (6.45.9 lts) installed on qemu/KVM. I have 100/100 mbits connection, but real upload is about only 5-7 mbits. I have two nics - one connected to isp:
<interface type='direct'>
<mac address='52:54:00:20:94:20'/>
<source dev='eth0' mode='private'/>
<model type='e1000-82545em'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
and second nic connected to openvswitch bridge. I have tested it with bandwith test. Local interface is ok - 150/150mbps. External - only 100/7mbps. With direct connected notebook to isp all is ok - 100/100mbps.
When i do system/reboot - and test bandwidth - couple of minutes all is ok (100/100), but after it upload drops to 7mbits. CPU load on CHR and hypervisor is ok during all tests.
Also i tried different NIC types (virtio, rtl8139) - no luck.
Any ideas an suggestions how to fix this problem? Thank you in advance.