Hello,

I have dual socket server with two AMD Epyc 7742 processors, so it has 128 physical cores available with HT disabled. I`m running Proxmox 6.2-12 on it with just one VM with Mikrotik CHR (6.47.7). The problem is that I can`t see more than 64 CPUs in CHR. Is it some reasonable limit with the number of CPUs? For example CCR1072 has 72 cores...

Thank you
Pep.

So each socket has 64 cores and each CPU is it's on NUMA node if my memory is correct. So if you want to use more then 64 cores you have to use more then one socket.

How have you configured CPU on the VM the CHR is running on?

Hello.
One CPU Epyc 7742 has 64 cores. In physical server two CPUs in two sockets mounted.
Mikrotik CHR VM in Proxmox has this settings: Processors 128 (2 sockets, 64cores) (EPYC-Rome)
But Mikrotik can see only 64 cores:

BTW I`m running it on Proxmox 6-3-3 and ROS 6.48.1 now

[admin@MikroTik] > system resource cpu print brief
# CPU LOAD IRQ D
0 cpu0 0% 0%
1 cpu1 0% 0%
2 cpu2 0% 0%
3 cpu3 0% 0%
4 cpu4 0% 0%
5 cpu5 0% 0%
6 cpu6 0% 0%
7 cpu7 0% 0%
8 cpu8 0% 0%
9 cpu9 0% 0%
10 cpu10 0% 0%
11 cpu11 0% 0%
12 cpu12 0% 0%
13 cpu13 0% 0%
14 cpu14 0% 0%
15 cpu15 0% 0%
16 cpu16 0% 0%
17 cpu17 0% 0%
18 cpu18 0% 0%
19 cpu19 0% 0%
20 cpu20 0% 0%
21 cpu21 0% 0%
22 cpu22 0% 0%
23 cpu23 0% 0%
24 cpu24 0% 0%
25 cpu25 0% 0%
26 cpu26 0% 0%
27 cpu27 0% 0%
28 cpu28 0% 0%
29 cpu29 0% 0%
30 cpu30 0% 0%
31 cpu31 0% 0%
32 cpu32 0% 0%
33 cpu33 0% 0%
34 cpu34 0% 0%
35 cpu35 0% 0%
36 cpu36 0% 0%
37 cpu37 0% 0%
38 cpu38 0% 0%
39 cpu39 0% 0%
40 cpu40 0% 0%
41 cpu41 0% 0%
42 cpu42 0% 0%
43 cpu43 0% 0%
44 cpu44 0% 0%
45 cpu45 0% 0%
46 cpu46 0% 0%
47 cpu47 0% 0%
48 cpu48 0% 0%
49 cpu49 0% 0%
50 cpu50 0% 0%
51 cpu51 0% 0%
52 cpu52 0% 0%
53 cpu53 0% 0%
54 cpu54 0% 0%
55 cpu55 0% 0%
56 cpu56 0% 0%
57 cpu57 0% 0%
58 cpu58 0% 0%
59 cpu59 0% 0%
60 cpu60 0% 0%
61 cpu61 0% 0%
62 cpu62 0% 0%
63 cpu63 0% 0%
[admin@MikroTik] >

P.