Community discussions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 7
 
User avatar
THG
Member
Member
Posts: 472
Joined: Thu Oct 15, 2009 1:05 am

Re: Metarouter images

Mon Apr 19, 2010 3:06 pm

yes, that applies to MetaROUTER images that will work on mipsbe (MIPS) or PPC (powerpc) architecture. What makes this quite a challenge.
I don't have access to routers with MIPS and PPC architectures, only X86 for the moment.
 
adrianatkins
Long time Member
Long time Member
Posts: 556
Joined: Wed Sep 05, 2007 10:34 am
Location: Spain
Contact:

Re: Metarouter images

Thu Jul 01, 2010 2:21 am

I can't see the point of a Meta Router.

I've tried, and just do not get it.

The main thing is lack of control of anything.

I might be a bit dense, but what is it for ?

If i flashed my cut of OpenWRT onto the board, then i can do what i like.

What use is a half-arsed version that can control almost nothing ?

ROS does almost all of what i can imagine a Router doing already.

For anything else, ROS isn't the platform.
Might as well bypass ROS's own Skewed OpenWRT platform and use the Original.

(use the Source Luke ! Use the Source !)
Don't forget to give me at least a tenner a month, every month
 
adrianatkins
Long time Member
Long time Member
Posts: 556
Joined: Wed Sep 05, 2007 10:34 am
Location: Spain
Contact:

Re: Metarouter images

Thu Jul 01, 2010 2:34 am

What i mean is that if i do not like ROS for a certain application, then i would use OpenWRT, like MT do.

I would not abbrogate any kind of responsibility to somebody else's OpenWRT-based OS at all.

I'd rather control the board from the start and make it do what i want.

If there is a wishlist anywhere, add 8x user controllable (thru ROS/scripts) GPIO ports.

Dump MetaRouter in favour of that. You'll sell more units
Don't forget to give me at least a tenner a month, every month
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 23069
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Metarouter images

Thu Jul 01, 2010 9:30 am

you can also run RouterOS inside metarouter. For example give your customers a separate router (virtual) with full access so they can configure their own firewalls without messing up the main router which makes the wireless connection. just one idea.
No answer to your question? How to write posts
 
User avatar
webasdf
Frequent Visitor
Frequent Visitor
Posts: 84
Joined: Mon Jan 26, 2009 6:37 pm

Re: Metarouter images

Wed Aug 18, 2010 6:22 am

As you know, new RouterOS versions now support other OS images for MetaRouter, so we welcome you - the users - to try this, and make new images that work. If you share your ready made images, that actually work with RouterOS MetaRouter, and add meaningful features (for example Asterix for VOIP, IPcop for firewall etc.), I will give you a Level6 license for an article in the Wiki and the Image.
I have created an OpenWRT metarouter image that comes with anonymity software Tor and Privoxy pre-installed and configured. Wiki article is available in the wiki at http://wiki.mikrotik.com/wiki/Use_Metar ... y_Software which describes how to set up a NAT network that uses Tor to protect user privacy.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 23069
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Metarouter images

Wed Aug 18, 2010 8:13 am

Yes, I already saw it, great article, thanks!
No answer to your question? How to write posts
 
adrianatkins
Long time Member
Long time Member
Posts: 556
Joined: Wed Sep 05, 2007 10:34 am
Location: Spain
Contact:

Re: Metarouter images

Fri Aug 20, 2010 11:03 pm

How do you know who said that ? ;)
Don't forget to give me at least a tenner a month, every month
 
User avatar
leemans
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Apr 07, 2005 12:55 am
Location: Belgium
Contact:

Re: Metarouter images - Asterisk - FreePBX Gui

Fri Oct 15, 2010 10:40 am

Hi nik247
is it possible to add the FreePBX Gui in your package list.
Thanks in advance.
P
 
User avatar
NetworkPro
Forum Guru
Forum Guru
Posts: 1363
Joined: Mon Jan 05, 2009 6:23 pm
Location: Worldwide
Contact:

Re: Metarouter images

Sun Nov 14, 2010 11:08 pm

As you know, new RouterOS versions now support other OS images for MetaRouter, so we welcome you - the users - to try this, and make new images that work. If you share your ready made images, that actually work with RouterOS MetaRouter, and add meaningful features (for example Asterix for VOIP, IPcop for firewall etc.), I will give you a Level6 license for an article in the Wiki and the Image.
I have created an OpenWRT metarouter image that comes with anonymity software Tor and Privoxy pre-installed and configured. Wiki article is available in the wiki at http://wiki.mikrotik.com/wiki/Use_Metar ... y_Software which describes how to set up a NAT network that uses Tor to protect user privacy.

Thank you.

I also was curious and saw http://www.youtube.com/watch?v=J-7iNS0VzGU

I have 100 ideas of how to fix the performance issues mentioned.

Some of my ideas:
-More caching, as an option. Similar to Squid configured to cache as much as possible (reload-into-ims etc). Each client caching what he has used and serving to other in p2p manner...
-Forget about TCP at all, don't even put TCP on the TOR network. Translate web requests to other protocol. Don't encapsulate packets, rather make own optimized packet to put out on physical network.
-Multiple UDP links possible? Instead of just one TCP based encrypted tunnel..
-Utilising DSCP standards? Marking encapsulated packets per priority, packet classification before encryption.. similar to what cFosSpeed does?
-etc etc torrenting over tor should be banned. uTorrent has good enough encryption already!
-What about IPv6 and utilizing what that standard already has to offer?!?!
-How about a new network: "optimized tor" - for browsing only. And keep the old one to encapsulate all type of packets over it. The new one - only very optimized web browsing and light communications.

:)
wiki.mikrotik.com/wiki/NetworkPro_on_Quality_of_Service
 
nik247
Frequent Visitor
Frequent Visitor
Posts: 60
Joined: Fri Jan 16, 2009 1:00 pm
Location: Ukraine, Kiev

Re: Metarouter images - Asterisk - FreePBX Gui

Mon Nov 15, 2010 10:10 am

Hi nik247
is it possible to add the FreePBX Gui in your package list.
Thanks in advance.
P
I can't stability of metarouter on RB450G and on this moment I don't generate any new images and packages.
I wait ROS 5.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6234
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Metarouter images

Mon Nov 22, 2010 4:09 pm

as a "workaround" you could have a stab at RB433AH to host a metarouter. That is very pussing that RB450G and RB433AH share same CPU first is crashing while second is working and working.

I know it is not a solution to the problem, but it is still something.
 
User avatar
leemans
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Apr 07, 2005 12:55 am
Location: Belgium
Contact:

Re: Metarouter images

Tue Nov 23, 2010 12:11 pm

Hi Nick247,
Ok thx, will wait for v5 and hopefully stable on RB450G.
Hope you will integrate then te FreePBX Gui in your package list.
Thx in advance.
Patrick
 
boretto
newbie
Posts: 29
Joined: Sat Oct 24, 2009 12:25 pm

Re: Metarouter images

Tue Nov 23, 2010 5:55 pm

Hi Nick247, I'm waiting for ROS5 to have FreePBX GUI too. You are becoming a metarouter Guru. Mikrotik may contract you as a metarouter engineer :)

Cheers! :lol:
 
User avatar
otgooneo
Trainer
Trainer
Posts: 563
Joined: Tue Dec 01, 2009 3:24 am
Location: Mongolia
Contact:

Re: Metarouter images

Fri Dec 03, 2010 12:01 pm

Hello,

Sorry, I`m a new for OpenWRT and Metarouter.
I just imported image file: openwrt-metarouter-rootfs.tgz. But It doesn`t start, status is always "booting". I`m using RB1000U V5.0rc4.

Where can I start? Has any one got Guide for dummies? (step-by-step) :-)
----------------------------
Want to learn more and more...
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5475
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: Metarouter images

Fri Dec 03, 2010 12:05 pm

For RB1000 you need PPC image, prebuilt images are found here
http://wiki.mikrotik.com/wiki/Metaroute ... al_machine
 
User avatar
otgooneo
Trainer
Trainer
Posts: 563
Joined: Tue Dec 01, 2009 3:24 am
Location: Mongolia
Contact:

Re: Metarouter images

Fri Dec 03, 2010 6:08 pm

Thanks mrz.

Where can I find packages for PPC?
http://openwrt.pantele.com.ua/trunk/met ... /packages/ - Those packages compatible with RB1000 (ppc)?
Where can I find /opkg install for PPC?

I want to load asterisk and snort on my metarouter of RB1000.
----------------------------
Want to learn more and more...
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5475
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: Metarouter images

Fri Dec 03, 2010 11:49 pm

Most likely those packages are for MIPS and will not work with PPC.
You will have to compile your own packages.
 
mdaitc
newbie
Posts: 34
Joined: Mon Mar 22, 2010 5:18 am

Re: Metarouter images

Mon Dec 06, 2010 12:20 am

Hi Nick247,

how have you been generating the MIPS packages? is this some script you've written? or is it fairly easy to accomplish?

thanks
 
User avatar
otgooneo
Trainer
Trainer
Posts: 563
Joined: Tue Dec 01, 2009 3:24 am
Location: Mongolia
Contact:

Re: Metarouter images

Mon Dec 06, 2010 3:10 am

I have changed my root password. But I can`t access by SSH. When I type wrong password, it shows me password not right. But when I type good password, SSH just disconnects.

Also please post your experience, who has routerboard power pc.
----------------------------
Want to learn more and more...
 
User avatar
engiman
just joined
Posts: 3
Joined: Tue Nov 02, 2010 7:35 pm
Location: Budapest

Re: Metarouter images

Sat Mar 26, 2011 12:27 am

I tried the OpenWRT image on RB493G, and it won't work. (ROS 4.16 and then 4.17)

Import is ok, it seems running, but the console freeze in 2 minutes.
I can't reconfigure the default network settings.

I tried the same image on a RB450G and it works ok.
I can reconfigure, change root passwd, etc..

I also tried other older images, but same behavior.
 
User avatar
engiman
just joined
Posts: 3
Joined: Tue Nov 02, 2010 7:35 pm
Location: Budapest

Re: Metarouter images

Fri Apr 01, 2011 12:08 pm

I have just upgraded routerOS ver 5 final on my 493G, and then tried the metarouter image.

Import was ok.

At first it seemed better, the console was responsive, so I started reconfigure.
after I typed "uci set network...." it freezes, then the router suddenly restarted itself twice.

Does anybody have a solution?
 
wpeople
Member
Member
Posts: 312
Joined: Sat May 26, 2007 6:36 pm

Re: Metarouter images

Sun Apr 10, 2011 2:30 pm

I've just tried to create a RouterOS metarouter on my RB493AH, but it's restarting when i try to start to boot the metarouter.
Unhandled kernel unaligned access[#1]:
Cpu 0
$ 0 : 00000000 c03b0000 00000010 b804000c
$ 4 : 00000000 00000000 ffffffff c03bcbac
$ 8 : c03c0c6d 00000000 00000001 c030cc70
$12 : ffffff81 00000000 7fc8b358 0a000446
$16 : c7e39cf8 c7e39d18 80000000 c61c0c4a
$20 : c6172000 00000080 c61c0c40 c617200c
$24 : 00000000 c010d1c0
$28 : c7e38000 c7e39cd0 c0370000 c010b880
Hi : 0ddde000
Lo : 00000008
epc : c010ba0c do_ade+0x2bc/0x410
Tainted: P
ra : c010b880 do_ade+0x130/0x410
Status: 1000f603 KERNEL EXL IE
Cause : 00000014
BadVA : b804000c
PrId : 0001800a (MIPS 24Kc)
Process discover (pid: 212, threadinfo=c7e38000, task=c7daf3c0, tls=00000000)
Stack : 00000040 c0265740 b804000c 00000051 00000008 c0389ae8 00000004 c6abc4c8
c61c0c4a c01046c0 c6adb340 c7e1eba0 c6adb340 c02c9280 c7e39c60 c019b290
00000000 c03b0000 00000010 b8040000 c0389aac 00000004 ffffb448 00000051
00000000 00000003 00000028 c0370000 ffffff81 00000000 7fc8b358 0a000446
c0389ae8 00000004 c6abc4c8 c61c0c4a c6172000 00000080 c61c0c40 c617200c
...
Call Trace:
[<c010ba0c>] do_ade+0x2bc/0x410
[<c01046c0>] ret_from_exception+0x0/0xc
[<c0265740>] rb_led_set_gpo+0xc/0x28
[<c0264f54>] led_trigger_event+0x5c/0x84
[<c6ac9b98>] sta_rx+0x348/0x8f0 [ath]
[<c6ac0fa4>] ath_hw_reset+0x2d8/0x6a0 [ath]


Code: 00118880 02118821 8e220000 <a8620000> b8620003 24030000 1460001a 00000000 8e0200a8
---[ end trace f47a588bc637185a ]---
Kernel panic - not syncing: Fatal exception in interrupt
Same with 5.0 and 5.1

Any ideas anyone?
 
wpeople
Member
Member
Posts: 312
Joined: Sat May 26, 2007 6:36 pm

Re: Metarouter images

Sun Apr 10, 2011 2:50 pm

What is strange: doing exactly the same on a RB450G and there works!
 
Vaelen
just joined
Posts: 18
Joined: Fri Aug 24, 2007 3:35 am

Re: Metarouter images

Fri May 27, 2011 3:33 pm

I have just upgraded routerOS ver 5 final on my 493G, and then tried the metarouter image.

Import was ok.

At first it seemed better, the console was responsive, so I started reconfigure.
after I typed "uci set network...." it freezes, then the router suddenly restarted itself twice.

Does anybody have a solution?
Same problem with RB493G ROS v5.3, though it doesn't seem to matter if you are doing anything, it could be a fresh image just sitting there and it would crash after ~2mins
Ryan Carter
Network Engineer C4ISR
MTCNA, MTCRE, MTCWE, MTCTCE
CCNA
 
xdemon
just joined
Posts: 7
Joined: Thu Sep 23, 2010 5:03 pm

Re: Metarouter images

Fri Oct 21, 2011 5:03 pm

Can confirm with rb493g (5.7)
 
crean
just joined
Posts: 5
Joined: Tue Feb 23, 2010 11:26 am

Re: Metarouter images

Thu Dec 01, 2011 10:30 am

Can confirm that it freezes on RB450G too -- last version tried were 5.6 using prebuilt images as well as an own one.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6234
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Metarouter images

Thu Dec 01, 2011 2:18 pm

try some board without switching feature.
 
User avatar
liquidcz
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Tue Dec 28, 2010 1:24 pm

Re: Metarouter images

Wed Jan 18, 2012 9:26 pm

Hi, i just create my own trunk OpenWrt images PPC and MIPS with many useful packages (repo) and i decided to make it public.

http://openwrt.wk.cz

Actual build is 29684.

Enjoy!
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: Metarouter images

Tue Jan 24, 2012 4:50 pm

Chěl bych pro RB433UAH metarouter balíček, který udělá z routerboardu miniserver a bude obsahovat přednastavený služby: www,email IMAP(s)+SMTP(s),VOIP PBX,direct connect hub, torrent tracker...na nějaký demo účet pro jeho snadnou změnu na vlastní

Nedaří se mi rozchodit Dovecot a Asterisk.
 
User avatar
liquidcz
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Tue Dec 28, 2010 1:24 pm

Re: Metarouter images

Wed Jan 25, 2012 8:56 am

I just upload new image build from trunk 29884, also repo tree. Added Squid proxy package to the repo.

http://openwrt.wk.cz/trunk/
http://openwrt.wk.cz/trunk/mr-mips/open ... 884.tar.gz
http://openwrt.wk.cz/trunk/mr-mips/packages/
http://openwrt.wk.cz/trunk/mr-ppc/openw ... 884.tar.gz
http://openwrt.wk.cz/trunk/mr-ppc/packages/

What is included in image?
base-files 103-r29884
base-files-network 3
bash 4.2-1
blkid 1.41.12-2
bridge 1.4-1
busybox 1.19.3-9
cfdisk 2.13.0.1-4
crda 1.1.1-1
glib2 2.26.1-2
haserl 0.9.27-1
hotplug2 1.0-beta-4
htop 1.0-2
iptables 1.4.10-4
iptables-mod-conntrack 1.4.10-4
iptables-mod-nat 1.4.10-4
iputils-ping 20101006-1
iputils-ping6 20101006-1
iw 3.1-2
kernel 2.6.31.10-1-1157b40dbcf6142d89c403a6efd7949c
kmod-ipt-conntrack 2.6.31.10-1
kmod-ipt-core 2.6.31.10-1
kmod-ipt-nat 2.6.31.10-1
kmod-ipt-nathelper 2.6.31.10-1
kmod-ppp 2.6.31.10-1
kmod-pppoe 2.6.31.10-1
libblkid 1.41.12-2
libc 0.9.32-103
libcap 2.22-1
libcom_err 1.41.12-2
libext2fs 1.41.12-2
libgcc 4.5-linaro-103
libiconv 5
libip4tc 1.4.10-4
libncurses 5.7-5
libnl-tiny 0.1-2
libopenssl 1.0.0g-1
libpthread 0.9.32-103
librt 0.9.32-103
libuci 2011-11-14.1-1
libuuid 1.41.12-2
libxtables 1.4.10-4
mc 4.7.5.3-1
nano 2.2.6-1
ntpclient 2007_365-4
openssh-client 5.9p1-4
openssh-keygen 5.9p1-4
openssh-server 5.9p1-4
opkg 618-2
ppp 2.4.5-4
ppp-mod-pppoe 2.4.5-4
swap-utils 2.13.0.1-4
terminfo 5.7-5
uci 2011-11-14.1-1
udev 173-1
uhttpd 30
webif 0.3-4986
zlib 1.2.5-1
BusyBox v1.19.3 (2012-01-24 14:32:31 MST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 ATTITUDE ADJUSTMENT (bleeding edge, r29884) ----------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
 -----------------------------------------------------
root@OpenWrt:/#
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: Metarouter images

Wed Jan 25, 2012 2:27 pm

I just upload new image build from trunk 29884, also repo tree. Added Squid proxy package to the repo........
Nezveřejnil si balíčky opendchub (direct connect hub) a cbtt (Bittorrent tracker) pro RB433UAH...proč ?
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6234
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Metarouter images

Wed Jan 25, 2012 2:30 pm


Nezveřejnil si balíčky opendchub (direct connect hub) a cbtt (Bittorrent tracker) pro RB433UAH...proč ?
English speaking forum :)
 
User avatar
liquidcz
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Tue Dec 28, 2010 1:24 pm

Re: Metarouter images

Wed Jan 25, 2012 3:00 pm

I just upload new image build from trunk 29884, also repo tree. Added Squid proxy package to the repo........
Nezveřejnil si balíčky opendchub (direct connect hub) a cbtt (Bittorrent tracker) pro RB433UAH...proč ?
Because i never needed packages opendchub or cbtt. But i can try to build them. :-)
 
neticted
Member Candidate
Member Candidate
Posts: 111
Joined: Wed Jan 04, 2012 10:36 am

Re: Metarouter images

Wed Jan 25, 2012 3:07 pm

liquidcz, what is your recomendation for openwrt configuration that can run http server with some scripting that can access Mikrotik API?
 
User avatar
liquidcz
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Tue Dec 28, 2010 1:24 pm

Re: Metarouter images

Wed Jan 25, 2012 3:21 pm

liquidcz, what is your recomendation for openwrt configuration that can run http server with some scripting that can access Mikrotik API?
Im not shure what are you exactly asking for. Do you need recomendation of amout of RAM for OpenWrt Metarouter, or type of webserver and scripting language?
 
User avatar
liquidcz
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Tue Dec 28, 2010 1:24 pm

Re: Metarouter images

Wed Jan 25, 2012 4:04 pm

to napismizpravu:

I just upload requested packages to my repo + some others.

New packages:

opendchub
cbtt
cbtt-mysql
transmission-daemon
transmission-remote
transmission-web
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6234
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Metarouter images

Wed Jan 25, 2012 4:21 pm

liquidcz, what is your recomendation for openwrt configuration that can run http server with some scripting that can access Mikrotik API?
you can see in API manual on wiki what languages are available, for web deployment ruby and php could be very useful, so in turn, any web-server that support either of these and are supported by openWRT
 
neticted
Member Candidate
Member Candidate
Posts: 111
Joined: Wed Jan 04, 2012 10:36 am

Re: Metarouter images

Thu Jan 26, 2012 2:47 am

liquidcz, what is your recomendation for openwrt configuration that can run http server with some scripting that can access Mikrotik API?
Im not shure what are you exactly asking for. Do you need recomendation of amout of RAM for OpenWrt Metarouter, or type of webserver and scripting language?
I meant openwrt software (which http and which script). I did not see php in packages you prepared, I guess it is ressoure hungry, so you avoided it.
 
User avatar
liquidcz
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Tue Dec 28, 2010 1:24 pm

Re: Metarouter images

Thu Jan 26, 2012 7:59 pm

liquidcz, what is your recomendation for openwrt configuration that can run http server with some scripting that can access Mikrotik API?
Im not shure what are you exactly asking for. Do you need recomendation of amout of RAM for OpenWrt Metarouter, or type of webserver and scripting language?
I meant openwrt software (which http and which script). I did not see php in packages you prepared, I guess it is ressoure hungry, so you avoided it.
I see. Well, type of httpd and scripting language depends on your scripting knowladge.

So, if i can afford some recomendation, im going to recomed to you to go by the simplest way. It means use default http web server (uHTTPd) which is used in my image for Webif, and try to use PHP.

Here are detailed manual how to configure it.
uHTTPd
- http://wiki.openwrt.org/doc/howto/lamp § Installing and configuring a web server and § Configuring PHP
PHP for uHTTPd
- http://wiki.openwrt.org/doc/howto/php

Well, im going to build php and ruby packages for my repositories soon.
 
User avatar
liquidcz
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Tue Dec 28, 2010 1:24 pm

Re: Metarouter images

Thu Jan 26, 2012 10:40 pm

I just uploaded new packages to my repo.

New packages:

php-pear*
php5-cgi
php5-cli
php5-fastcgi
php5-mod*
ruby-*
 
neticted
Member Candidate
Member Candidate
Posts: 111
Joined: Wed Jan 04, 2012 10:36 am

Re: Metarouter images

Fri Jan 27, 2012 6:14 pm

Great! PHP will be my weapon of choice if RB does not die when it runs :)
I guess your build is more stable than one provided by Mikrotik.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6234
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Metarouter images

Mon Jan 30, 2012 9:12 am

it is just few years younger, more problems fixed. Hope it works well for you.
 
User avatar
c0d3rSh3ll
Long time Member
Long time Member
Posts: 558
Joined: Mon Jul 25, 2011 9:42 pm
Location: [admin@Chile] >

Re: Metarouter images

Wed Feb 01, 2012 6:03 am

what is the password for autentication in the webif??
c0d3rSh3ll @ hotmail.com
Skype: c0d3rSh3ll
3 rb750 ; 1 rb951G-2HnD and 2 rb951-2n for testing lab.
The best way to say thank, is give karma
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6234
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Metarouter images

Wed Feb 01, 2012 9:39 am

if you mean webfig, than that is same as for other services - default being - admin with blank password.
 
User avatar
c0d3rSh3ll
Long time Member
Long time Member
Posts: 558
Joined: Mon Jul 25, 2011 9:42 pm
Location: [admin@Chile] >

Re: Metarouter images

Wed Feb 01, 2012 4:15 pm

webif of the distro openwrt for the administration
c0d3rSh3ll @ hotmail.com
Skype: c0d3rSh3ll
3 rb750 ; 1 rb951G-2HnD and 2 rb951-2n for testing lab.
The best way to say thank, is give karma
 
lexsi
just joined
Posts: 2
Joined: Thu Feb 02, 2012 7:08 pm

Re: Metarouter images

Fri Feb 03, 2012 9:13 am

Hello,
liquidcz, thanks for the work done.
You can compile the package udpxy (http://sourceforge.net/projects/udpxy/) by mips?
 
User avatar
liquidcz
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Tue Dec 28, 2010 1:24 pm

Re: Metarouter images

Sun Feb 05, 2012 1:13 pm

what is the password for autentication in the webif??
I think, that you have to set up root password from console first, reboot second, and after that you can login as root with your password.
 
User avatar
liquidcz
Frequent Visitor
Frequent Visitor
Posts: 73
Joined: Tue Dec 28, 2010 1:24 pm

Re: Metarouter images

Sun Feb 05, 2012 1:14 pm

Hello,
liquidcz, thanks for the work done.
You can compile the package udpxy (http://sourceforge.net/projects/udpxy/) by mips?
Done. Just uploaded new image, package and config.
 
lexsi
just joined
Posts: 2
Joined: Thu Feb 02, 2012 7:08 pm

Re: Metarouter images

Wed Feb 08, 2012 3:26 pm

Done. Just uploaded new image, package and config.
Thank you very much.
 
ferywu
just joined
Posts: 22
Joined: Fri Feb 17, 2012 6:24 pm

Re: Metarouter images

Fri Feb 17, 2012 6:44 pm

I just upload new image build from trunk 29884, also repo tree. Added Squid proxy package to the repo.
I used your build for mips on my RB450G(using ROS v5.13), the result is every 6 or 12 minutes my RB450G continually reboot itself.
But thank you, because with this problem i search another openwrt-metarouter build and then i found openwrt running fine for at least 1 day since importing to metarouter yesterday with http://openwrt.pantele.com.ua/trunk/met ... rootfs.tgz

For anyone in this conversation,
I wonder what's the different between openwrt-metarouter patch v1.1 and v1.2, since i couldn't find openwrt-metarouter patch v 1.1 anywhere, i can't see the diff's. Is it really v1.2 just add ppc support ?
Maybe mrz can provide v1.1 again ?
Or it's about kernel version? between 2.6.27 and 2.6.31 ?

Counting the time and still solid with nik mips image, almost 2 days. No RB450G reboot itself, no OpenWRT network up and down itself again.

I hope will last forever :)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 7

Who is online

Users browsing this forum: No registered users and 1 guest