Page 1 of 1

Restore configuration problem in Metarouter (RB1100 - 4.10)

Posted: Thu Jul 01, 2010 1:12 pm
by Hunteru
Hi all,

I had a PC runnig MikroTik 4.10 with KVM active set with a mikrotik virtual machine.
I made a backup of the virtual mikrotik (his configuration) and I want to migrate to my new RB1100 using MetaRouter.
I set the MetaRouter with my virtual machine, I import the config and I restored.
In console after it reboots it hangs like this:

Stopping services...
Restarting system.
Starting services...

Why is happening ? I can't use my new RB1100 properly.

Please help.

The Metarouter machine is set to use 128 M of ram and 500 Mbytres of disk space, with 2 virtual interfaces set to 2 dynamic bridges.
add name=shaper disk-size=500000 memory-size=128 disabled=no
add virtual-machine=shaper dynamic-bridge=bridge_1
add virtual-machine=shaper dynamic-bridge=bridge_2
reboot shaper

Re: Restore configuration problem in Metarouter (RB1100 - 4.

Posted: Fri Jul 02, 2010 8:46 am
by janisk
try not to import port and interface settings.

or do Ctrl+A; Ctrl+R to detect transfer rate and you should get that login prompt.