Page 1 of 1

Service VLAN on swOS

Posted: Thu Jul 20, 2017 12:06 am
by Denuro
Hello,

I was testing and found out that the swOS 2.4 does not read a QinQ Service VLAN tag.
Setting the port as VLAN Mode Enabled and VLAN Receive Only Tagged does not work with Service Vlans, had to set the Vlan Receive to any for it to work.

Tested with a CSS326-24G-2S+RM, setting up the vlan tunneling with a CRS125-24G-1S-IN and a CRS326-24G-2S+RM, both with routerOS.

Also noticed the swOS 2.3 does not work with QinQ vlans at all, not even setting the port as Vlan Receive any.

Is this the expected behavior on the CSS software?

Re: Service VLAN on swOS

Posted: Thu Jul 20, 2017 10:08 am
by becs
Currently, MikroTik switches with SwOS do not support Q-in-Q VLANs.

Re: Service VLAN on swOS

Posted: Thu Jul 20, 2017 3:21 pm
by Denuro
Currently, MikroTik switches with SwOS do not support Q-in-Q VLANs.
Thanks for the reply.
Are there any plans to implement this in a future release?

Re: Service VLAN on swOS

Posted: Wed Oct 25, 2017 7:14 pm
by bmv
+1.
Surely QinQ is something standard to implement