Community discussions

 
bgvndas
just joined
Topic Author
Posts: 8
Joined: Mon Sep 25, 2017 6:24 pm

SwOS SNMP + The Dude. How to setup?

Thu Nov 16, 2017 1:47 pm

Hello.
SwOS SNMP + The Dude. How to setup recording or switch port speed statistics from SwOS to the Dude?
I need to see bandwidth throughput draft history on switch port.
 
abrar226
just joined
Posts: 1
Joined: Wed Sep 06, 2017 10:55 am

Re: SwOS SNMP + The Dude. How to setup?

Sat Jul 28, 2018 12:34 pm

i need the same.
i have some swos switches CSS326-24G-2S+ on dude and i want to see the tx/rx on them.
i enabled snmp but it doesn't read the ports.
do i need to add something to do that.
 
ZschimmerIT
just joined
Posts: 24
Joined: Thu Jul 13, 2017 2:50 pm
Location: Germany

Re: SwOS SNMP + The Dude. How to setup?

Sun Sep 23, 2018 2:05 pm

Same here,
when adding the "link" between switch and device by selecting "Mastering type: snmp" the switchports should automatically been recognized but they aren't.
What's wrong there?
Is there a missing mib file?
I know that it's possible to find the oid of the specific ports and paste then in the "label" but this is a very complicated way to do.....

Pls help

Cheers
Certified MTCNA
 
User avatar
teslasystems
just joined
Posts: 14
Joined: Sun Aug 09, 2015 3:00 pm

Re: SwOS SNMP + The Dude. How to setup?

Sun Oct 14, 2018 1:45 am

I have looked in SNMP tree and it seems that the switch doesn't provides any data related to port tx/rx rate.
Please add this data!
 
User avatar
teslasystems
just joined
Posts: 14
Joined: Sun Aug 09, 2015 3:00 pm

Re: SwOS SNMP + The Dude. How to setup?

Mon Feb 04, 2019 10:16 pm

In 2.9 it's possible to see interface speed with SNMP! Thanks MikroTik!
 
roque86
just joined
Posts: 6
Joined: Sun Oct 06, 2019 6:31 pm

Re: SwOS SNMP + The Dude. How to setup?

Tue Oct 08, 2019 6:00 pm

Hello,
I am also trying to see SwOs info on The Dude but I am not able too see link status or any interface under the snmp tab at all.
Switch: CSS326-24G-2S+ Swos C2.10

Any clues?
 
EdPa
MikroTik Support
MikroTik Support
Posts: 28
Joined: Fri Sep 15, 2017 10:05 am
Location: Riga
Contact:

Re: SwOS SNMP + The Dude. How to setup?

Wed Oct 09, 2019 1:09 pm

SwOS only supports a partial MIKROTIK-MIB (for health, PoE-out and SFP diagnostics). To monitor interface status and some other counters, you should look for IF-MIB. Use snmpwalk to see exact OIDs.
 
roque86
just joined
Posts: 6
Joined: Sun Oct 06, 2019 6:31 pm

Re: SwOS SNMP + The Dude. How to setup?

Wed Oct 09, 2019 3:58 pm

SwOS only supports a partial MIKROTIK-MIB (for health, PoE-out and SFP diagnostics). To monitor interface status and some other counters, you should look for IF-MIB. Use snmpwalk to see exact OIDs.
Thank you, but while it was possible to use the snmpwalk to see the OID tree, I do not think it helps setting the link status on The Dude.
What did the trick was to change the Snmp Profile from 'default' to 'v2-public'

Who is online

Users browsing this forum: No registered users and 4 guests