Community discussions

MikroTik App
 
JokeRBY
just joined
Topic Author
Posts: 8
Joined: Fri Apr 27, 2018 1:54 pm
Location: Wroclaw
Contact:

CRS326 SwOS booting problem

Fri Apr 27, 2018 2:09 pm

We have 2 new CRS326-24G-2S+RM switches.
And there is no problem to booting to ROS.
/system routerboard settings set boot-os=swos
/system reboot
And after that - no chance to worked device until we change bootos from console.

Boot output in console:
BootROM 1.41
Booting from SPI flash
BootROM: Image checksum verification PASSED


RouterBOOT booter 6.42.1

CRS326-24G-2S+

CPU frequency: 800 MHz
  Memory size: 512 MiB
 Storage size:  16 MiB

Press any key within 2 seconds to enter setup

RouterBOOT-6.42.1
What do you want to configure?
   d - boot delay
   k - boot key
   s - serial console
   n - silent boot
   o - boot device
   r - reset booter configuration
   e - format storage
   w - repartition nand
   g - upgrade firmware
   i - board info
   p - boot protocol
   b - booter options
   j - boot os
   t - test ram memory
   x - exit setup
your choice: j - boot os

Select what to boot:
 * 1 - RouterOS
   2 - SwOS
your choice: 2 - SwOS

RouterBOOT-6.42.1
What do you want to configure?
   d - boot delay
   k - boot key
   s - serial console
   n - silent boot
   o - boot device
   r - reset booter configuration
   e - format storage
   w - repartition nand
   g - upgrade firmware
   i - board info
   p - boot protocol
   b - booter options
   j - boot os
   t - test ram memory
   x - exit setup
your choice: x - exit setup


writing settings to flash... OK

BootROM 1.41
Booting from SPI flash
BootROM: Image checksum verification PASSED


RouterBOOT booter 6.42.1

CRS326-24G-2S+

CPU frequency: 800 MHz
  Memory size: 512 MiB
 Storage size:  16 MiB

Press any key within 2 seconds to enter setup..
I already tried to upgrade firmware with console port (transfer is OK) - invalid file id (or smth like that).

Who is online

Users browsing this forum: No registered users and 25 guests