SwOS in boot loop

twelch24 · Wed May 16, 2018 11:59 pm

CRS326-24G-2S+RM straight out of the box. Booted routeros, /system routerboard settings set boot-os=swos and rebooted. Logged in via web to swos, uploaded firmware and upgraded to v2.7 (was:2.0), rebooted, now i get this:

Code: Select all

BootROM 1.41

Booting from SPI flash

BootROM: Image checksum verification PASSED





RouterBOOT booter 3.39



CRS326-24G-2S+



CPU frequency: 800 MHz

  Memory size: 512 MiB

 Storage size:  16 MiB



Press any key within 2 seconds to enter setup..



FAULT:

DFAR=441E220E

  R0=400178A3   R1=4000C84B   R2=DEADBEEF   R3=4002205C

  R4=441E220E   R5=00000000   R6=FFFFFFFF   R7=FFFFFFFF

  R8=4000BA10   R9=00000008  R10=4000C7F3  R11=00000190

  LR=40006D52   SP=8045174C



STACK:





Rebooting...

It never reboots, just hangs at Rebooting...

I have tried:
Reset with reset switch
force backup loader
booting routeros (Works!)

But i cannot boot swos. Swos never gets to a point where I can upgrade firmware regardless of reset switch. Netinstall only works for routeros, correct? How would I load a swos .bin on this switch, assuming the issue is that the firmware was somehow corrupted?

Thanks
-Tim

SwOS in boot loop

SwOS in boot loop

Who is online