Hi
I have rb 260gs
On eth1 I have my main router with internet
on eth2 I have link to my other switch cisco
on eth3 to eth5 I want internet connection from my second router on vlan native 1
On cisco I have vlan 11 where is my second router wan plugged and vlan 1 (native) where is connected router lan port
On cisco in gi0/1 I have trunk vlan 11 and native vlan 1.
And now I want to set something like this
eth1 -> vlan 11 untagged
eth 2 -> vlan 11 tagged and vlan 1 native vlan
eth 3 - eth5 vlan 1 untagged
I set something like this and this is not working. Someone could help me how set this?
I next step i will replace cisco with second rb260gs switch