Community discussions

MikroTik App
 
User avatar
JazzMaster
Member Candidate
Member Candidate
Topic Author
Posts: 115
Joined: Wed Jan 16, 2019 7:18 pm
Location: Evansville, Indiana , USA

CCR and CSS setup questions

Thu Jan 17, 2019 5:43 pm

Here goes my first post for help.I have a task that I am not certain how to start. Here is a list that might help.
  • Configure CCR1009-8G-1S-1S+ router to provide VLAN setup for one phone VLAN 2 and whatever is necessary to provide private vlan configuration to a CSS326-24G Switch
  • CSS 326-24G configuration to provide private vlan setup on each port of the switch
  • Each port on the switch needs to be isolated from any other port. It does need to carry the PHONE VLAN to each port on the switch
I am open to anything that will get me started with this configuration.
Thanks in advanced for your help.

Dennis
 
User avatar
JazzMaster
Member Candidate
Member Candidate
Topic Author
Posts: 115
Joined: Wed Jan 16, 2019 7:18 pm
Location: Evansville, Indiana , USA

Re: CCR and CSS setup questions

Fri Jan 18, 2019 6:08 pm

I do need help with this question.
 
User avatar
sebastia
Forum Guru
Forum Guru
Posts: 1782
Joined: Tue Oct 12, 2010 3:23 am
Location: Antwerp, BE

Re: CCR and CSS setup questions

Fri Jan 18, 2019 6:22 pm

That's a fun assignment, if I were you I would ask the instructor what is meant by
needs to be isolated from any other port
.

General wiki: https://wiki.mikrotik.com/wiki/Manual:TOC, you can search there by topic

Vlan:
https://wiki.mikrotik.com/wiki/Manual:Interface/VLAN
https://wiki.mikrotik.com/wiki/Manual:B ... _switching

CSS
https://wiki.mikrotik.com/wiki/SwOS/CSS326

General info about hardware, have a look at block diagram to understand limitations:
https://mikrotik.com/product/CCR1009-8G ... -downloads
https://mikrotik.com/product/CSS326-24G ... -downloads


If we just give you the answer here, you won't learn anything. So study and ask.
 
User avatar
JazzMaster
Member Candidate
Member Candidate
Topic Author
Posts: 115
Joined: Wed Jan 16, 2019 7:18 pm
Location: Evansville, Indiana , USA

Re: CCR and CSS setup questions

Fri Jan 18, 2019 7:01 pm

It most definitely is a fun assignment.
As for the question "needs to be isolated from any other port" I must assign a separate network address in a dynamic range so each port has a private network. That is why I wish to use VLANS. I will assign vlan 101 thru 120 to ports 1 thru 20 retrospectively. I hope this helps explain my issue.
 
User avatar
sebastia
Forum Guru
Forum Guru
Posts: 1782
Joined: Tue Oct 12, 2010 3:23 am
Location: Antwerp, BE

Re: CCR and CSS setup questions

Fri Jan 18, 2019 7:09 pm

It does. And what you intent will do the job. And now the rest.

Forgot to mention: if you want to simulate networks / devices, you can do that with GNC3. There you can use CHR for free (limited in bandwidth)

Who is online

Users browsing this forum: No registered users and 12 guests