Our CRS328-24P-4S+ is currently running on SWOS 2.9 and we are experiencing issues where the switch go into a idle state where no ports are talking to each other and does not pass traffic on ETH or VLANS also the switch is inaccessible during this time until the CRS328-24P-4S+ is rebooted then it runs again for a couple of days, we have replaced the switch as whole with another CRS328-24P-4S+ with SWOS 2.9 and receiving the same issue, we currently have 9 of these CRS328-24P-4S+ in the field all giving problems after 2.9 upgrade and i am unable to downgrade to SWOS 2.8
Also after 3-4 Hours of running we are receiving a red LED FAN failure error on all CRS328-24P-4S+ switches.
Also after upgrade to SWOS 2.9 port 23 and port 24 gives alot of link downs on a basis of 3 days almost 300 link downs, but when we plug that same device into port 22, we receive 0 link downs in 14 days.
SWOS Upgrade page also displaying same SWOS 2.9 as a new release with the same date, even after upgrade still the same
Is there a fix coming soon for this or is there a work around?