Community discussions

MikroTik App
 
monik
just joined
Topic Author
Posts: 5
Joined: Tue Mar 19, 2019 1:05 am

QinQ untagged with tpid 0x8100 on CRS112-8P-4S

Tue Mar 19, 2019 1:15 am

Hello, please help. How to configure hw-offloading QinQ untagged with tpid 0x8100 on CRS112-8P-4S? ROS 6.43.7. I am attached the scheme. On eth5 need to untag qinq 2200, on eth6 need to untag qinq 2201, eth1 is uplink (qinq as is), eth2 downlink (qinq as is).
Managment on vlan 4005, if i enter /interface ethernet switch set bridge-type=service-vid-used-as-lookup-vid that mikrotik disconnected, if i previosly enter /interface ethernet switch port set ether1 egress-service-tpid-override=0x8100 ingress-service-tpid-override=0x8100 that mikrotik too disconnected.
Please change configuration switches crs1xx simpler as like crs3xx.
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 16 guests