I have a brand new out of the box CRS326-24S+2Q+ which I loaded up in RouterOS then made it boot into SwOS. I can ping it at 192.168.88.1 and load the browser logging in with admin no password, but then it shows a fault light on the switch and I lose pings as it reboots itself.
I serial'ed into it and swapped it back to RouterOS, upgraded with 6.46.4 and upgraded the Routerboard as well, swapped it back to SwOS and it still reboots when I try to log into it. I reset it to no avail. I just programmed a different CRS326-24S+2Q+ and it worked fine but this one is giving me trouble.
Here is what I caught in putty while serial'ed. Any help would be appreciated. Thanks!
Code: Select all
RouterBOOT booter 6.46.4
CRS326-24S+2Q+
CPU frequency: 650 MHz
Memory speed: 300 MHz
Memory size: 64 MiB
Storage size: 16 MiB
Press any key within 2 seconds to enter setup..
SwOS v2.10p
mac address: 74:4D:28:F8:59:3C
ip address: 0.0.0.0
board: CRS326Q-24S+2Q+
serial nr: BF720A9A7E96
What do you want to do?
i - board info
r - reset configuration
b - restore configuration
x - reboot
g - upgrade software
your choice:
ip address: 192.168.88.1
FAULT!
pc=80404ADB ra=80404ACD sp=805FDDA0
v0=80522290 v1=373663A6 at=0000003D
a0=00000001 a1=80518420 a2=00007CCB a3=00000014
t0=80010000 t1=80010000 t2=6960AF2B t3=00000000
t4=0000000A t5=00000001 t6=FFFFF8E4 t7=00001611
s0=000006E4 s1=80517D40 s2=00000064 s3=00000001
s4=81410048 s5=81420168 s6=81420000 s7=56019325
t8=00000000 t9=000006D6 gp=C2E5C000 s8=81410048
Status=18008003 Cause=40008014 EntryHi=D0006000
BadVAddr=373663AA ErrorPC=C0085010