Dear MikroTik team and community,
I have a MikroTik CRS317-1G-16S+RM and have connected two H2+ devices from Hardkernel https://www.hardkernel.com/shop/odroid-h2plus/ via RJ45 and some MikroTik S+RJ10 Revision 2.16. In the WebUI of SwOS in the "link" tab I can see that the devices are connected with the speed of 2.5Gbits. Great . But when I started testing I noticed that receiving data from the H2+ was good with a speed of 2.34Gbit/s and sending data to the H2+ was not. The speed was around 200Mbits. A quick look at the Error tab of SwOS revealed that there are RX pauses on the Ports where the H2+ are connected to. When I connect the two H2+ directly to each other I get full performance. And now I do not know what to do and wanted to ask for some help. (I tested a little bit around with flow control to see if that changes something, but it did not). What further information can I provide to help solve this? (don't know if this helps but the discussion started here https://forum.odroid.com/viewtopic.php? ... 53#p300553
Thanks in advance.