This is a request for some documentation about how the ACLs work in SwOS with some example cases.
https://wiki.mikrotik.com/wiki/SwOS/CSS106-VLAN-Example provides a good overview of how to setup VLANs for the most common cases. I know about https://wiki.mikrotik.com/wiki/SwOS/CSS106#ACL and unfortunately, it gives only a single line description of some of the items on the ACL setup screen, but not enough for me to make sense of.
There was a question on the Ubiquiti forum asking about distributing a /29 to five "customers" in a business park, and limiting each customer to be able to use only a specific IP address from the block. https://community.ui.com/questions/Edge ... 36c55c5cc3, and I think a switch with ACL would be the best solution, but I am not sure if the CSS106 ACL could do that or not.
I can't find any documentation with an example of how the ACL works on SwOS, specifically on the CSS106-5G-1S, but any SwOS example would be better than what I have been able to find.
I've searched the SwOS forum with the query "ACL" but the threads it finds don't have any examples.
I did see that the latest version (2.12) of SwOS for the CSS106-5G-1S reportedly fixes an issue with ACLs on the CSS106,
scroll down to see this:
*) CSS106: fixed ACL, sometimes it did not work if MAC & IP address matchers were used at same time (or when Allow-From address was specified);
I also used Google to search for CSS106 SwOS ACL and CSS106 SwOS ACL example, but the second only finds vlan examples. I can't find anything on youtube either (at least not in English, and the ones I did see appear to be for RouterOS.