Hello!

Looking for Zabbix template to monitor at least some of CRS326Q-24S+2Q+ values when running SwOS. Any help will be appreciated.

Use standard 'Network Generic Device SNMP' template (built-in). If needed, download it from https://git.zabbix.com/projects/ZBX/rep ... neric_snmp
Link is for latest Zabbix v.5.2, you can change branch to another if needed.

Use standard 'Network Generic Device SNMP' template (built-in). If needed, download it from https://git.zabbix.com/projects/ZBX/rep ... neric_snmp
Link is for latest Zabbix v.5.2, you can change branch to another if needed.

Thanks for response. With suggested templates all I get is Device uptime and SNMP availability. Looking for some more data. I'm running Zabbix 4.0

For version 4 download links are here
https://share.zabbix.com/official-templ ... plate-pack
Use SNMPv2 template. And be patient, I received first data after about 30 min.

For version 4 download links are here
https://share.zabbix.com/official-templ ... plate-pack
Use SNMPv2 template. And be patient, I received first data after about 30 min.

Thanks, already did that. The problem actually was the long time to receive data.

Now I encountered next problem - most of SFP interfaces not showing in latest data (Show items without data checked).

Looks like most of QSFP+ interfaces are there but only few of SFP ports (9,10,16) and none of those are actually connected. (All connected are missing)