Why are you forcing vlan id?
Also you don’t want to force vlan id 1 as this id is kinda special.
I have same switch and got it working well with multiple vlans, trunk ports, access ports etc. My trunk is on sfp+.
Vlans are working for me on all 2.13rc5+
There are already threads for css610 vlans where support team gives more details how this should be configured.
Hi Nannou,
Thank you for your post both here and on other CSS610 threads,
From other threads the below seems to be the recommendation:
As for the VLANs, I would suggest trying these settings:
- Disable the "Add Information Option" under the System menu
- For access or untagged ports, use "VLAN Mode = optional", "VLAN Receive = only untagged" and specify the "Default VLAN ID".
- For the trunk or tagged ports, use "VLAN Mode = strict", "VLAN Receive = only tagged".
- Make sure to include all the necessary member ports for each VLAN ID under the VLANs menu.
When I first went to RC12 these were the settings i set, unfortunately they still give me the same result that DHCP broadcasts are not passed on the trunk if they are on VLAN 1.
Alex