Hello,
my question is, how to forward vlan tagged packets of any vlan id without having to configure each vlan and assign it to the ports, where it should be accessible.
My usecase requires to have 3 vlans on some ports with port-based vlans (PVID). These have to be configured of course, that's what I'm aware of. Some dozen tagegd vlans are only for transit between a HCI cluster and a meraki core switch, where two CRS317 switches should be placed in between. The vlans setup as port-baed vlans with PVID are for management, 'cluster interface' and 'storage network'. On the interfaces that have the PVID set for the 'cluster interface' and the uplink port to the next switch would like have any tagged vlans being forwarded, without having to create and assign them in SwOS or RouterOS to ports. This would be much more practical for my colleagues who are not mikrotik aware, because they then only have to manage the vlans in the HCI and meraki environment, when the CRS317 could pass all through.
I'm not really sure, if this is possible and you can understand, what I'm trying to ask. The easy way, using all meraki equipment would cost about 14x the cost of two CRS317-1G-16S+RM, which I is pretty heavy for an environment, where most things are test lab setups.
Thanks for your ideas,
Markus, forum newbie