Community discussions

MUM Europe 2020
 
becs
MikroTik Support
MikroTik Support
Topic Author
Posts: 479
Joined: Thu Jul 07, 2011 8:26 am

SwOS version 1.10 released

Wed Dec 18, 2013 2:34 pm

What's new in 1.10:

*) allow to disable/enable auto negotiation on SFP port on RB260;
*) fixed problem - hosts tab stopped working if 0:0:0:0:0:0 was learned on RB250;
*) enable transmit on SFP port only when module with signal is detected;
*) fixed problem - port lock & lock on first did not work on RB260;
*) fixed problem - port full duplex setting was set for wrong port on RB260;
*) fixed problem - broadcast correct uptime to it's neighbors;
*) fixed problem - port egress rate did not limit traffic properly on RB260;
*) fixed problem - sometimes board did not reboot after upgrade;
*) added vlan-id to static host table;
http://www.mikrotik.com/download.html
 
tambu
just joined
Posts: 9
Joined: Tue Nov 26, 2013 5:06 pm

Re: SwOS version 1.10 released

Sat Dec 21, 2013 5:49 pm

checked port security.
works only in vlan id 1, in other vlans blocks all traffic.
its a non-working function
 
becs
MikroTik Support
MikroTik Support
Topic Author
Posts: 479
Joined: Thu Jul 07, 2011 8:26 am

Re: SwOS version 1.10 released

Thu Jan 02, 2014 10:40 am

RB260GS requires VLAN mode set to "optional", "enabled" or "strict" to be able to forward tagged traffic.
 
tambu
just joined
Posts: 9
Joined: Tue Nov 26, 2013 5:06 pm

Re: SwOS version 1.10 released

Mon Jan 06, 2014 10:21 am

RB260GS requires VLAN mode set to "optional", "enabled" or "strict" to be able to forward tagged traffic.
i said about function port lock, not vlan tagging. VLAN is works great, but port lock is works only in vlan id 1.
 
becs
MikroTik Support
MikroTik Support
Topic Author
Posts: 479
Joined: Thu Jul 07, 2011 8:26 am

Re: SwOS version 1.10 released

Wed Jan 08, 2014 9:25 am

RB260GS requires VLAN mode set to "optional", "enabled" or "strict" to be able to forward tagged traffic.
i said about function port lock, not vlan tagging. VLAN is works great, but port lock is works only in vlan id 1.
VLAN id 1 is for untagged frames. Additional Static Hosts entries with the same MAC but other VLAN ids are needed to make Port Lock work for other VLAN ids.
 
tambu
just joined
Posts: 9
Joined: Tue Nov 26, 2013 5:06 pm

Re: SwOS version 1.10 released

Wed Jan 08, 2014 10:25 am

RB260GS requires VLAN mode set to "optional", "enabled" or "strict" to be able to forward tagged traffic.
i said about function port lock, not vlan tagging. VLAN is works great, but port lock is works only in vlan id 1.
VLAN id 1 is for untagged frames. Additional Static Hosts entries with the same MAC but other VLAN ids are needed to make Port Lock work for other VLAN ids.
that is, you want to say that the port lock does not work for other Vlan but the first id? or pls, give me example working configuration with another vlan id and enabled port lock.
p.s. are you speak russian?
 
becs
MikroTik Support
MikroTik Support
Topic Author
Posts: 479
Joined: Thu Jul 07, 2011 8:26 am

Re: SwOS version 1.10 released

Thu Jan 09, 2014 2:52 pm

The following configuration sets Port Lock on RB260GS Port4 and Port5. It allows untagged (vlan id 1) and tagged (vlan id 5) frames between hosts with specified MAC addresses.
forwarding.png
vlan.png
statichosts.png
You do not have the required permissions to view the files attached to this post.
 
tambu
just joined
Posts: 9
Joined: Tue Nov 26, 2013 5:06 pm

Re: SwOS version 1.10 released

Thu Jan 09, 2014 5:58 pm

I need this configuration and it does not work
rb260_2.png
rb260_3.png
rb260_4.png
You do not have the required permissions to view the files attached to this post.
 
p1p1p1
just joined
Posts: 22
Joined: Sat Feb 23, 2013 1:53 pm

Re: SwOS version 1.10 released

Mon Feb 03, 2014 11:52 am

we have serious problem with RB260:
we are using RB260 with singlemode 1-fibre SFP modules (1310, 1550nm) GigaLight GPB-3524L-L2CD-C (cisco compatible) "blue"

and another end of fibre is
EDGECORE ES4624-SFP or SIGNAMAX 065-7851 or brocade FCX624S-F
or RB2011xxxx with "yellow" GPB-5324L-L2CD-C


problem is SFP initialization after SHORT power failure or FAST DISCONNECT/RECONNECT power adapter on RB260 - ethernet ports are working,
but in switch management is SFP module not visible and autonegotiation settings not checked (fw didnt remember that settings????)
after unplug and plug SFP works normally, problem problem is with SFP initialization / handling on RB260?!

tested also 1-fibre SPB-7710CIS-HTR - SPB-7610CIS-HTR and working correctly ...?

2-fibre SFPs are working normally, so problem is with 1-fibre SFP handling/negotiation/initialization?? ...

CAN U PLEASE MAKE FIX FOR THIS BUG????!!! this problem can be maybe fixed with sfp socket restart after RB260 boots up ... maybe ...?
 
User avatar
ringlet
newbie
Posts: 35
Joined: Sun Mar 07, 2010 9:24 pm
Location: Gdynia, Poland
Contact:

Re: SwOS version 1.10 released

Thu Feb 06, 2014 1:53 pm

please correct me if i am wrong:

1. i don't see any SNTP implementation in this device?
2. i don't see any logging at all ?
3. there is no information about igmp snooping so there is no igmp snooping?
4. there is no possibility to name ports ...
 
0pl0pl
newbie
Posts: 32
Joined: Tue Feb 19, 2013 10:57 pm

Re: SwOS version 1.10 released

Thu Feb 06, 2014 3:17 pm

please correct me if i am wrong:

1. i don't see any SNTP implementation in this device?
2. i don't see any logging at all ?
3. there is no information about igmp snooping so there is no igmp snooping?
4. there is no possibility to name ports ...
1. No SNTP or time only uptime
2. No log or syslog
3. IGMP snooping is hardware supported, but not enabled or manageble
4. No port name or description.
 
User avatar
ringlet
newbie
Posts: 35
Joined: Sun Mar 07, 2010 9:24 pm
Location: Gdynia, Poland
Contact:

Re: SwOS version 1.10 released

Thu Feb 06, 2014 10:35 pm

please correct me if i am wrong:

1. i don't see any SNTP implementation in this device?
2. i don't see any logging at all ?
3. there is no information about igmp snooping so there is no igmp snooping?
4. there is no possibility to name ports ...
1. No SNTP or time only uptime
2. No log or syslog
3. IGMP snooping is hardware supported, but not enabled or manageble
4. No port name or description.
what a shame .... 1,2 and 4 .... really , these are really basic options ... any chances for changes ?
 
mpreissner
Member
Member
Posts: 356
Joined: Tue Mar 11, 2014 11:16 pm
Location: Columbia, MD

Re: SwOS version 1.10 released

Sat Mar 22, 2014 3:33 pm

Is SSL or SSH support coming in SwOS anytime soon? It's a little amazing to me that there's no terminal interface, or a way to secure the web session.
Michael Preissner
CISSP, CCSP, CEH, PMP
 
zdybilas
just joined
Posts: 4
Joined: Sun Oct 20, 2013 6:16 pm

Re: SwOS version 1.10 released

Sat Mar 29, 2014 9:28 am

260GS SNMP is going on and off on the dude map. with 1,09 on other 260GS SNMP is working stable.
I'll check also RB532A (3.30) which is before switch. Maby he is blocking in some way a SNMP transmission.
 
mschut
just joined
Posts: 20
Joined: Sat Aug 18, 2007 10:05 am
Location: The Hague Netherlands
Contact:

BUG!! RB260GS SFP power loss

Wed Apr 23, 2014 10:12 am

We experience the exactly the same problem with the the Mikrotik SFP DDM S-35/53LC20D single fiber modules.
The RB260GS are on the latest firmware version 1.12.

After a power loss, the link is not restored. To restore the link the SFP module needs to be taken out and plugged in again!!

Our units are remotely placed in Camera poles and therefore the need to resolve this issue is high!

Thank you for the quick support! Martin



we have serious problem with RB260:
we are using RB260 with singlemode 1-fibre SFP modules (1310, 1550nm) GigaLight GPB-3524L-L2CD-C (cisco compatible) "blue"

and another end of fibre is
EDGECORE ES4624-SFP or SIGNAMAX 065-7851 or brocade FCX624S-F
or RB2011xxxx with "yellow" GPB-5324L-L2CD-C


problem is SFP initialization after SHORT power failure or FAST DISCONNECT/RECONNECT power adapter on RB260 - ethernet ports are working,
but in switch management is SFP module not visible and autonegotiation settings not checked (fw didnt remember that settings????)
after unplug and plug SFP works normally, problem problem is with SFP initialization / handling on RB260?!

tested also 1-fibre SPB-7710CIS-HTR - SPB-7610CIS-HTR and working correctly ...?

2-fibre SFPs are working normally, so problem is with 1-fibre SFP handling/negotiation/initialization?? ...

CAN U PLEASE MAKE FIX FOR THIS BUG????!!! this problem can be maybe fixed with sfp socket restart after RB260 boots up ... maybe ...?

Who is online

Users browsing this forum: No registered users and 2 guests