Hi,
I've 2 hAPac2 routers, but recently one stopped functioning, so I switched to the spare device, installed the backup etc. and it works fine.
Now I've got some time and would like to diagnose what happened to the first device. It is not accessible via IP(s), nor via MAC (via WinBox).
I did the "factory reset" by holding the knob pushed while powering-on (the lamp flashes), but the device is still not found in WinBox Neighbors detection function, also Connect after entering the MAC manually isn't working as well ("ERROR: could not connect to <MAC>"). Of course also tried (unseccessfully) the default device IP 192.168.88.1 at both the first 2 eth ports from a PC with IP 192.168.88.3 with subnetmask 255.255.255.0 .
What else can I do to fix this?