Community discussions

MUM Europe 2020
 
User avatar
rwrocket
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 80
Joined: Mon Nov 24, 2014 8:08 am

CCR1036 PPPoE & large 40mbit+ queues help/advice

Thu Oct 29, 2015 8:20 am

Currently I am running 6.32.2

I have long struggled with suspecting that queues in Mikrotik are slowing down my customers more than it should.

I thought I had solved the problem by going away from using the default-small queue type but I found the problem seems to be back.

Here is the scenario
PPPoE over VPLS tunnel running on MPLS over a reliable wireless link
PPPoE user has speed controlled by radius attribute

If I set the radius user to unlimited speed, I am able to reliably get 50+mbps
If I set the radius user to 40mbps download speed with default-small queue type I get max 30mbps
If I set the queue type to default I get max 37mbps

My Upload limit is 10mbps and works fine

I will continue to tweak my queue types in hopes to get this right but I am hoping someone else has found a reliable solution or queue size/type for high speed queues.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1723
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: CCR1036 PPPoE & large 40mbit+ queues help/advice

Thu Oct 29, 2015 9:36 am

What do you use? simple queues? queue tree? paste your queue config
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
rwrocket
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 80
Joined: Mon Nov 24, 2014 8:08 am

Re: CCR1036 PPPoE & large 40mbit+ queues help/advice

Thu Oct 29, 2015 11:57 pm

As I said.....

PPPoE

this implies simple queue because as far as I know PPPoE can only use simple queues.

There is no queue config as such, they are created dynamically upon successful PPPoE radius auth
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 1746
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: CCR1036 PPPoE & large 40mbit+ queues help/advice

Fri Oct 30, 2015 2:24 am

y have noted that PCQ queues for high bandwidth need bigger buffer
 
User avatar
rwrocket
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 80
Joined: Mon Nov 24, 2014 8:08 am

Re: CCR1036 PPPoE & large 40mbit+ queues help/advice

Fri Oct 30, 2015 2:32 am

I have been having good success with wireless-default type actually in my recent tests

Hopefully it stays this way but looks like I may have found my solution

Who is online

Users browsing this forum: No registered users and 63 guests