/queue simple add name=test target=10.0.0.0/24 max-limit=256K/512K \
interface=ether2
Am I correct in thinking the above will limit traffic from any IP in 10.0.0.0/24 to downloading at 512k and uploading at 256k?
If that's correct, the next question is: Is that TOTAL for that subnet? Or by connection?
I'm looking for a rule that will allow me to shape traffic going to/from a subnet BY CONNECTION or STREAM. So if there are 5 connections, each would get 512k down or 256k up.
Re: Traffic Shaping Question
I've now looked at PCQ... but contrary to what they are called, they appear to be more Per *ADDRESS* Queues, not Per *CONNECTION* Queues.
What I really want is a way to rate limit each connection going to somewhere.
So IP range 192.168.1.0/24 coming into my network can establish a stream of 3megabits/second to any subscriber. It can establish a new stream of 3megabits/second to the same subscriber, but not more than 3 megabits/second per any stream.
What I really want is a way to rate limit each connection going to somewhere.
So IP range 192.168.1.0/24 coming into my network can establish a stream of 3megabits/second to any subscriber. It can establish a new stream of 3megabits/second to the same subscriber, but not more than 3 megabits/second per any stream.