Community discussions

MikroTik App
 
biland
just joined
Posts: 21
Joined: Thu Jan 26, 2012 1:01 pm
Location: tuxtepec, mexico
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Jan 22, 2018 10:17 am

Thanks for the link!
It was handy to test our 10Gbps connection,
Screenshot 2018-01-08 13.25.48.png
shame, when mikrotik itself has to use another server to test their speed ,, you should offer this service from your side..... at least for europe
saludos from mexico
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jan 23, 2018 6:52 pm

Updated to 6.42rc12 with legit open-vmware-tools.... So nice to suspend or gracefully shutdown a CHR.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jan 27, 2018 5:09 am

Heads up
I think I broke the public btest server I am hosting.
This is the 207.32.195.2 btest server

FYI - I think I mistakenly blew out the P10 licence

I made a request to Mikrotik to see if I may get a (free) chr unlimited license. If they give me one, I will rebuild it with the new license.

I will be fixing it sometime mid next week.
Until then - it is kinda working , but the btest throughputs during a test may be quite slower than you are used to seeing.

North Idaho Tom Jones
 
iRakic
just joined
Posts: 23
Joined: Tue Feb 04, 2014 1:06 am
Location: Serbia

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Jan 28, 2018 8:05 pm

Tom,

I hope they will give you the license. Your Mikrotik BW test server is a very valuable asset for Mikrotik community.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Jan 29, 2018 11:10 am

What's wrong with trial license? :)
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jan 31, 2018 6:29 am

Heads up
I think I broke the public btest server I am hosting.
This is the 207.32.195.2 btest server

FYI - I think I mistakenly blew out the P10 licence

I made a request to Mikrotik to see if I may get a (free) chr unlimited license. If they give me one, I will rebuild it with the new license.

I will be fixing it sometime mid next week.
Until then - it is kinda working , but the btest throughputs during a test may be quite slower than you are used to seeing.

North Idaho Tom Jones
Tom,

You can move your license. :)
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jan 31, 2018 11:11 pm

Heads up
I think I broke the public btest server I am hosting.
This is the 207.32.195.2 btest server

...
It's back up and running again.
FYI - when I was activating a different new CHR, I made a mistake and blew out the license on this btest server.
Running on same license P-10 not P-unlimited

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Feb 01, 2018 4:51 am

planetcoop


May I ask if you would please put the btest server 207.32.195.2 in an always allow list on your btest server ?

I will do the same tomorrow morning

I would like to run a 30 minute continous 1 to 2 gig sustained btest both-directions during my busy times - soon in the near future

thanks

North Idaho Tom Jones
 
BrianHeston
just joined
Posts: 3
Joined: Fri Feb 02, 2018 6:54 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Feb 02, 2018 7:02 pm

Hey guys, I'm new to the forum and fairly new to the world of Mikrotik devices. I was looking for a way to periodically test my bandwidth and keep a log of it so that I can have a little chat with my ISP at some point. That's when I stumbled upon this thread, which appears to be exactly what I need, but I'm having some problems.

I've tried using Tom's server today with no luck, but I can't figure out why it's not working, or at least why I'm getting 0s for my results.

I was able to use planetcoop's server, but it only shows TX figures, RX just returns 0s. Any ideas as to why or where I should be looking to start troubleshooting?

Thanks,
Brian
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 06, 2018 2:36 am

planetcoop


May I ask if you would please put the btest server 207.32.195.2 in an always allow list on your btest server ?

I will do the same tomorrow morning

I would like to run a 30 minute continous 1 to 2 gig sustained btest both-directions during my busy times - soon in the near future

thanks

North Idaho Tom Jones
Tom,

I have just added you. Sorry for the delay.
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 06, 2018 2:39 am

BTEST users,

I am working on moving in the next few months and while the new home is built i will not be running btest.planetcoop.com. More to come and info here when available.

If you need specific tests prior to March, please let me know here so i can try to accommodate extra test time. Just a friendly reminder that my connect is a home connection and not related to any business.

Enjoy.
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 2989
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Feb 15, 2018 2:20 am

planetcoop


May I ask if you would please put the btest server 207.32.195.2 in an always allow list on your btest server ?

I will do the same tomorrow morning

I would like to run a 30 minute continous 1 to 2 gig sustained btest both-directions during my busy times - soon in the near future

thanks

North Idaho Tom Jones
OFF TOPIC

Tom please help me, someway i was testing at 50mbps udp and the test continues sending us data despite y stopped the test

I tried with firewall drop and reject rules ant traffic is is still incoming to my router

i rebooted the router and traffic still incoming
help.png
You do not have the required permissions to view the files attached to this post.
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 2989
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Feb 15, 2018 2:24 am

forget it

traffic has stopped

THX again for the test servers very usefull
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Feb 15, 2018 4:10 am

I have experience it myself many many times ...
when doing a btest (remote client to btest server -and/or/ btest server to remote clinet) , where you stop the btest and it continues no matter what.
I found that when this happens, the quickest fix is to just reboot one of the devices.

I suspect this is a un-documented-feature (aka bug). I've seen this on several versions now ...

North Idaho Tom Jones
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Feb 15, 2018 12:48 pm

I also suffer from this time to time. Unfortunately it was not so much painful for me to report a bug to mikrotik. Would you do so?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Feb 15, 2018 4:06 pm

Ya know , it would be kinda nice to see btest updated with some extra features

New features I would like to see include:
(Using Winbox to run btest)
- run for option (time and or amount of traffic to pass)
- Random simulator (all random at the same time - speed up - speed down - tcp - udp - packet size - pause - propagation delay). In other words , let btest really walk a test through it's paces. With the random function - there needs to be a maximum bandwidth setting to not exceed
- An auto ramp-up speed setting. A new function to test how fast the network is without any errors (zero packet loss) & how fast the network is maximum throughput while experiencing some normal packet loss
- In all cases have btest auto stop/quit running at some time. The only exception is if a run for option was specified
-- Reporting results - much much better results !!! something like an optional 100 line report indicating percent loss from 0 percent and bandwidth up/down tcp/udp and repeat for 1 percent loss & 2 percent loss up through 100 percent loss. And on the report indicate the acceptable effective useable speed of the network.
- Have the btest server better log what it is doing !!!!!!!!!!!

North Idaho Tom Jones
admin for 207.32.195.2 btest server :)

Funny lol - FYI -
Back around 1990, I wrote up an email/smtp type of btest server. You email it a command line in the body of the email and the server would start sending massive amounts of email back to you until you email the turn-off command to stop the test. It was a great tool for lighting up the network with massive massive sustained traffic for testing. Well - that is .. until I was hacked and somebody stole my /etc/passwd file and used it to send political spam email to my ISP customers !!! The person that stole my /etc/passwd file was running for county commissioner. Well --- you can guess what happened when he sent an email from his ISP to my special diagnostic email address. Lets just say he turned on the test on a Friday and I found out the test was running Monday morning when I came into the office. The system was full flat line on non-stop emails for days. This event got me (yes me) on the front page of the "Wall Street Journal" and on every local news tv/newspaper it was headlines. The person that triggered the test said "It was like walking down the street and inserting flyers into mail boxes - then opening a mail box with a nuclear bomb rigged to go off!". I told the news agencies he committed a felony crime and stole private data and by his criminal actions is the person who crashed 2 ISPs here in town over the weekend. He was later un-successful in his run for county commissioner.

Anyways - a note to chechito , I know what it is like to start a bandwidth test and not have it stop :)
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Feb 15, 2018 6:06 pm

Thinking about my just previous post containing ..."It was like walking down the street and inserting flyers into mail boxes - then opening a mail box with a nuclear bomb rigged to go off!"...

I guess the moral of my story is:
Don't start something you can't stop
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 20, 2018 6:53 am

Team,

Sorry to say, as i had posted before. I will be moving soon and i found out today that i will not be able to move my current service. btest.planetcoop.com will be offline in the first week of march. If you have any special requests, please let me know.

Thank you for allowing me to host the btest server and participating in the community. If i get better news int the future, i will bring it back.
 
alaskanjackal
newbie
Posts: 27
Joined: Tue Sep 29, 2015 1:29 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 20, 2018 8:40 am

Just a friendly reminder that my connect is a home connection and not related to any business.
I've always been curious--how on earth do you have a 10G connection at home?! :O

Or at least that's what TomJ's post #1 in this thread implies. IIRC somewhere in this thread it was speculated that you have Comcast Gigabit Pro (i.e. 2-3Gbps), which would make more sense (traceroutes to you do indicate you're on Comcast). Tom's may be on a real 10G connection, since he's an ISP...

Unfortunately with the way that my ISP implements carrier-grade NAT, I never was able to test my speed to you from here. (I was hoping that they'd get IPv6 implemented this winter so I could try.) Ah, well. Enjoy your move, and I hope there's at least some kind of decent Internet service at your new place.
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 20, 2018 4:12 pm

Just a friendly reminder that my connect is a home connection and not related to any business.
I've always been curious--how on earth do you have a 10G connection at home?! :O

Or at least that's what TomJ's post #1 in this thread implies. IIRC somewhere in this thread it was speculated that you have Comcast Gigabit Pro (i.e. 2-3Gbps), which would make more sense (traceroutes to you do indicate you're on Comcast). Tom's may be on a real 10G connection, since he's an ISP...

Unfortunately with the way that my ISP implements carrier-grade NAT, I never was able to test my speed to you from here. (I was hoping that they'd get IPv6 implemented this winter so I could try.) Ah, well. Enjoy your move, and I hope there's at least some kind of decent Internet service at your new place.
Yes, i am on comcast. Yes, it was home service. The sad news is that the new home is just too far away from the network for the fiber build out. As i had said, if anything changes, i will let you guys know. As to how it is 10g, well. That will be a great story for another day.

In these final few weeks, i have removed all restrictions for testing. The 10g link is wide open for testing.
 
BrianHeston
just joined
Posts: 3
Joined: Fri Feb 02, 2018 6:54 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 20, 2018 9:05 pm

I'm still not seeing useful results. Can anyone help?

MikroTik
feb/20/2018 10:56:32

Result :
TX speed 0.576 Mbps/s
RX speed 0.0 Mbps/s

TX total average 0.625 Mbps/s
RX total average 0.0 Mbps/s

Thanks,
Brian
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Feb 21, 2018 2:17 am

I'm still not seeing useful results. Can anyone help?

MikroTik
feb/20/2018 10:56:32

Result :
TX speed 0.576 Mbps/s
RX speed 0.0 Mbps/s

TX total average 0.625 Mbps/s
RX total average 0.0 Mbps/s

Thanks,
Brian
Brian,

Q1 - What is the IP address of your Mikrotik ?

Q2 - Is your Mikrotik behind another firewall / and or behing another wireless router ?

Q3 - Is the WAN IP address of your Mikrotik a live Internet IP address ?

Q4 - When testing to my btest server 207.32.195.2 , have you tried waiting for 1 hour and a few minutes prior to re-trying the btest ?

Q5 - Do you have some Mikrotik firewalls running on your Mikrotik ?

Re Q1 & Q2 & Q3 , I want to know your Mikrotik is the last device you go through to your ISP to get out to the Internet.

Re Q4 , Continued test and repeated tests are auto blocked for 1 hour , then auto released

Re Q5 , If you are running btest through a firewall , you might be only able to send and not receive. To receive, your firewall has to be turned off -or- your firewalls need some port forwards. When you receive a btest, the remote btest server will send to some TCP and/or UDP ports on your Mikrotik. If you have firewalls without port forwards, then your firewalls will block/prevent an Internet connection from the btest server to your Mikrotik.

If you have no firewalls & your Mikrotik is the last device connected to your ISP & you have waited 1-hour and a few minutes & it still will not receive btest , then there is a possiblility your ISP might have a firewall on your Internet connection. You can test this by setting up a web server & port forward port 80 to someting and see if you can http://you-ip-address and see if it works.

You can check/look/see your firewalls by looking at your Mikrotik IP firewall settings. You can make a backup and then delete all firewall rules and test it , then restore the config to put your Mikrotik back the way is was prior to purging the firewall rules.

FYI - the 207.32.195.2 btest server has no firewalls (other than the auto block after an IP has exceedeed the alloted time for btest - then after an hour it will auto purge. If you try withing the hour , the timeout to auto purge starts at 1 hour again.

North Idaho Tom Jones
 
BrianHeston
just joined
Posts: 3
Joined: Fri Feb 02, 2018 6:54 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Feb 23, 2018 11:31 pm

I'm still not seeing useful results. Can anyone help?

MikroTik
feb/20/2018 10:56:32

Result :
TX speed 0.576 Mbps/s
RX speed 0.0 Mbps/s

TX total average 0.625 Mbps/s
RX total average 0.0 Mbps/s

Thanks,
Brian
Brian,

Q1 - What is the IP address of your Mikrotik ?

Q2 - Is your Mikrotik behind another firewall / and or behing another wireless router ?

Q3 - Is the WAN IP address of your Mikrotik a live Internet IP address ?

Q4 - When testing to my btest server 207.32.195.2 , have you tried waiting for 1 hour and a few minutes prior to re-trying the btest ?

Q5 - Do you have some Mikrotik firewalls running on your Mikrotik ?

Re Q1 & Q2 & Q3 , I want to know your Mikrotik is the last device you go through to your ISP to get out to the Internet.

Re Q4 , Continued test and repeated tests are auto blocked for 1 hour , then auto released

Re Q5 , If you are running btest through a firewall , you might be only able to send and not receive. To receive, your firewall has to be turned off -or- your firewalls need some port forwards. When you receive a btest, the remote btest server will send to some TCP and/or UDP ports on your Mikrotik. If you have firewalls without port forwards, then your firewalls will block/prevent an Internet connection from the btest server to your Mikrotik.

If you have no firewalls & your Mikrotik is the last device connected to your ISP & you have waited 1-hour and a few minutes & it still will not receive btest , then there is a possiblility your ISP might have a firewall on your Internet connection. You can test this by setting up a web server & port forward port 80 to someting and see if you can http://you-ip-address and see if it works.

You can check/look/see your firewalls by looking at your Mikrotik IP firewall settings. You can make a backup and then delete all firewall rules and test it , then restore the config to put your Mikrotik back the way is was prior to purging the firewall rules.

FYI - the 207.32.195.2 btest server has no firewalls (other than the auto block after an IP has exceedeed the alloted time for btest - then after an hour it will auto purge. If you try withing the hour , the timeout to auto purge starts at 1 hour again.

North Idaho Tom Jones
Tom, thank you for your very detailed response. I see what you are driving at and I'm guessing that my topology is the issue.

My Mikrotik sits behind my ISPs DSL modem/router. Within said device, my Mikrotik is listed as a DMZ device, but it does not have its own public IP. As such, connections are theoretically not filtered in any way, but they are obviously still NATed. I'm guessing that this is why when I use planetcoop's server, I can't get RX results, but I can get TX results. However, it still doesn't explain why I get no results at all from your server.

Here are the answers to your questions:

Q1 - What is the IP address of your Mikrotik ? 192.168.0.181

Q2 - Is your Mikrotik behind another firewall / and or behing another wireless router ? It sits behind my ISP provided DSL modem / router

Q3 - Is the WAN IP address of your Mikrotik a live Internet IP address ? No

Q4 - When testing to my btest server 207.32.195.2 , have you tried waiting for 1 hour and a few minutes prior to re-trying the btest ? Yes

Q5 - Do you have some Mikrotik firewalls running on your Mikrotik ? I do have some rules running on my Mikrotik, but as stated above, there is no external firewall between the Mikrotik and the internet. Are there rules required on the Mikrotik to open the ports for the testing? What TCP / UDP ports are used?

Again, I truly appreciate the detailed response.

Thanks,
Brian
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Feb 24, 2018 12:32 am

I'm still not seeing useful results. Can anyone help?

MikroTik
feb/20/2018 10:56:32

Result :
TX speed 0.576 Mbps/s
RX speed 0.0 Mbps/s

TX total average 0.625 Mbps/s
RX total average 0.0 Mbps/s

Thanks,
Brian
Brian,

Q1 - What is the IP address of your Mikrotik ?

Q2 - Is your Mikrotik behind another firewall / and or behing another wireless router ?

Q3 - Is the WAN IP address of your Mikrotik a live Internet IP address ?

Q4 - When testing to my btest server 207.32.195.2 , have you tried waiting for 1 hour and a few minutes prior to re-trying the btest ?

Q5 - Do you have some Mikrotik firewalls running on your Mikrotik ?

Re Q1 & Q2 & Q3 , I want to know your Mikrotik is the last device you go through to your ISP to get out to the Internet.

Re Q4 , Continued test and repeated tests are auto blocked for 1 hour , then auto released

Re Q5 , If you are running btest through a firewall , you might be only able to send and not receive. To receive, your firewall has to be turned off -or- your firewalls need some port forwards. When you receive a btest, the remote btest server will send to some TCP and/or UDP ports on your Mikrotik. If you have firewalls without port forwards, then your firewalls will block/prevent an Internet connection from the btest server to your Mikrotik.

If you have no firewalls & your Mikrotik is the last device connected to your ISP & you have waited 1-hour and a few minutes & it still will not receive btest , then there is a possiblility your ISP might have a firewall on your Internet connection. You can test this by setting up a web server & port forward port 80 to someting and see if you can http://you-ip-address and see if it works.

You can check/look/see your firewalls by looking at your Mikrotik IP firewall settings. You can make a backup and then delete all firewall rules and test it , then restore the config to put your Mikrotik back the way is was prior to purging the firewall rules.

FYI - the 207.32.195.2 btest server has no firewalls (other than the auto block after an IP has exceedeed the alloted time for btest - then after an hour it will auto purge. If you try withing the hour , the timeout to auto purge starts at 1 hour again.

North Idaho Tom Jones
Tom, thank you for your very detailed response. I see what you are driving at and I'm guessing that my topology is the issue.

My Mikrotik sits behind my ISPs DSL modem/router. Within said device, my Mikrotik is listed as a DMZ device, but it does not have its own public IP. As such, connections are theoretically not filtered in any way, but they are obviously still NATed. I'm guessing that this is why when I use planetcoop's server, I can't get RX results, but I can get TX results. However, it still doesn't explain why I get no results at all from your server.

Here are the answers to your questions:

Q1 - What is the IP address of your Mikrotik ? 192.168.0.181

Q2 - Is your Mikrotik behind another firewall / and or behing another wireless router ? It sits behind my ISP provided DSL modem / router

Q3 - Is the WAN IP address of your Mikrotik a live Internet IP address ? No

Q4 - When testing to my btest server 207.32.195.2 , have you tried waiting for 1 hour and a few minutes prior to re-trying the btest ? Yes

Q5 - Do you have some Mikrotik firewalls running on your Mikrotik ? I do have some rules running on my Mikrotik, but as stated above, there is no external firewall between the Mikrotik and the internet. Are there rules required on the Mikrotik to open the ports for the testing? What TCP / UDP ports are used?

Again, I truly appreciate the detailed response.

Thanks,
Brian
Re - your Mikrotik behind your ISPs router
I assume your Mikrotik gateways to your ISPs router Ip address of 192.168.0.1 (The inside ethernet LAN connection to your Mikrotik 192.168.0.181
I am also guessing , that that same ISP router at your home just might have a outside live-IP-address. Thus it is natting your network to the ISPs router at your location.

Sometimes - it may be worth checking out - ... The ISP router at your location might have a user-login account so that you can configure the ISP's LAN ethernet & wireless connection to you.
If so, it might be simple to login into the ISP router at your location and disable NAT and simply turn the ISP's router at your location into a bridge (IP passthrough). If so , then your Mikrotik just might get a live-internet-IP address instead. --- resulting in something your probably want.
AND/OR ....
There might be a DMZ/port forward settings in your ISP's router so that you can port-forward some ports to your Mikrotik.
If this is possible, then you could port forward the following ports to your Mikrotik
ssh
telnet
remote desktop
VPN
FTP
http
https
winbox
btest ports (I think this is a port range)

Then your Mikrotik could then use some ports for itself (winbox & btest ports) and then port-forward the other remaining ports to another computer (a linux web server for example)

North Idaho Tom Jones
 
modsx
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Wed Feb 24, 2016 3:54 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Feb 28, 2018 9:27 am

Hi!

Many thanks for the courage and charity.
If someone has the opportunity to do the same - welcome!

I tested from Latvia (EU).
This is not the best way to test from EU, because both servers are located in the USA.
The first server is 50 hops (devices between) second 14. With both of them there is no objective measure, sometimes connecting, sometimes not, the second works better.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Feb 28, 2018 5:48 pm

Hi!

Many thanks for the courage and charity.
If someone has the opportunity to do the same - welcome!

I tested from Latvia (EU).
This is not the best way to test from EU, because both servers are located in the USA.
The first server is 50 hops (devices between) second 14. With both of them there is no objective measure, sometimes connecting, sometimes not, the second works better.
The 207.32.195.2 btest server (the one I operate), might be a little problematic right now. I am turning up some BGP circuits and testing various loads on my routed networks right now.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Feb 28, 2018 9:28 pm

Heads-Up ... FYI

info...
The 207.32.195.2 btest server for public Mikrotik admin use has been on-line since January 2016
During the last two years, I estimate it has performed somewhere between 1/4 million to 2 million btest(s).
The current average systained bandwidth is about 30 meg , which also includes those btest(s) that peak over 3-Gig and sustain 512-Meg and the btest(s) that run less than 1-Meg.

Todays btest server changes...
Because my ISP business is growing and always adding new high-speed Internet customers (3-Meg to 512-Meg accounts), I now need to reduce the amount of bandwidth I have been donating to the 207.32.195.2 btest project , so that I can keep a reserve burstable bandwidth capacity for all my customers , and not saturate my up-stream Internet feeds.
The 207.32.195.2 bandwidth limiters (simple queue) are now set at the following:
Target: ether1 (the CHR ether1 interface with IP address 207.32.195.2)
(Simple Queue , Target Upload & Target Download)
Max Limit: 105M
Burst Limit: 1250M
Burst Threshold: 50M
Burst Time: 500

The simple queue operates this way:
#1; allow sustained btest of 105-Meg
#2; If the recent bandwidth average has been below 50-Meg for (Burst-Time seconds), then allow up to 1.25-Gig (untill this this #2 line no longer is valid).

Thus , if nobody has very recently (or currently) used the btest server, then you should be able to btest up to 1.25-Gig for a short duration then auto-fall back down to 105-Meg.
If more than one person is using the 207.32.195.2 btest server at the same time, then the bandwidth limitations apply to all btesters combined. Thus if 10 users are using it at the same time, your results might be 1/10th the results you might of been expecting.

Also - keep in mind that the btest server often places a block on your IP which makes you wait for a period of time until you can continue btesting. This is done to help prevent the btest campers to start a btest and never stop their btest.

I hope to keep the 207.32.195.2 btest server on-line for many more years to come (providing I always have available bandwidth).

I/we would welcome anybody to also place their one btest server on-line for public access.
It could be a max of 10 meg or 100 meg or 1-Gig or even a 10-Gig. I am sure the community would be thankfull for any additional btest servers (especially in different locations throughout the world).

North Idaho Tom Jones
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Mar 02, 2018 3:42 am

Heads-Up ... FYI

info...
The 207.32.195.2 btest server for public Mikrotik admin use has been on-line since January 2016
During the last two years, I estimate it has performed somewhere between 1/4 million to 2 million btest(s).
The current average systained bandwidth is about 30 meg , which also includes those btest(s) that peak over 3-Gig and sustain 512-Meg and the btest(s) that run less than 1-Meg.

Todays btest server changes...
Because my ISP business is growing and always adding new high-speed Internet customers (3-Meg to 512-Meg accounts), I now need to reduce the amount of bandwidth I have been donating to the 207.32.195.2 btest project , so that I can keep a reserve burstable bandwidth capacity for all my customers , and not saturate my up-stream Internet feeds.
The 207.32.195.2 bandwidth limiters (simple queue) are now set at the following:
Target: ether1 (the CHR ether1 interface with IP address 207.32.195.2)
(Simple Queue , Target Upload & Target Download)
Max Limit: 105M
Burst Limit: 1250M
Burst Threshold: 50M
Burst Time: 500

The simple queue operates this way:
#1; allow sustained btest of 105-Meg
#2; If the recent bandwidth average has been below 50-Meg for (Burst-Time seconds), then allow up to 1.25-Gig (untill this this #2 line no longer is valid).

Thus , if nobody has very recently (or currently) used the btest server, then you should be able to btest up to 1.25-Gig for a short duration then auto-fall back down to 105-Meg.
If more than one person is using the 207.32.195.2 btest server at the same time, then the bandwidth limitations apply to all btesters combined. Thus if 10 users are using it at the same time, your results might be 1/10th the results you might of been expecting.

Also - keep in mind that the btest server often places a block on your IP which makes you wait for a period of time until you can continue btesting. This is done to help prevent the btest campers to start a btest and never stop their btest.

I hope to keep the 207.32.195.2 btest server on-line for many more years to come (providing I always have available bandwidth).

I/we would welcome anybody to also place their one btest server on-line for public access.
It could be a max of 10 meg or 100 meg or 1-Gig or even a 10-Gig. I am sure the community would be thankfull for any additional btest servers (especially in different locations throughout the world).

North Idaho Tom Jones
I have managed to keep btest.planetcoop.com online yet. During my new home move, i have made arrangements to keep it online. I expect to take my btest.planetcoop.com down around June first now. if i can keep it online in any capacity, I will let you know.

Thank you,
Planetcoop
 
lrl
newbie
Posts: 25
Joined: Sat Sep 28, 2013 10:31 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Mar 04, 2018 11:06 am

Thanks for the resource! I can't tell you how many times it's been very useful for us!

We're currently building out a new 10G datacenter in our head-end and once we have the new ESXi cluster going I'd like to host a btest server. We'll have plenty of upload available and it's not going to be used.
3-4-2018 1-53-20 AM.jpg
3-4-2018 2-01-39 AM.jpg
3-4-2018 2-01-33 AM.jpg
You do not have the required permissions to view the files attached to this post.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Mar 22, 2018 8:56 pm

btest server change effective immediately , aka - right now (March 22, 2018)
btest server 207.32.195.2 was moved to 207.32.194.24
Same server , same settings .. Just IP renumbered now to 207.32.194.24

btest user:btest
btest password: btest

FYI: My business is growing. We needed the entire 207.32.195.0/24 Class C netblock for some new networks we are building. Normally , I would of given a prior notice but something came up today and I had to rush a re-number on this btest server.

North Idaho Tom Jones
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Mar 26, 2018 8:28 pm

The planetcoop btest is back up. it was down last week due to an unexpected server hardware failure. All good now. Enjoy. Also bumped to latest RC. :)
 
billjellis
Frequent Visitor
Frequent Visitor
Posts: 53
Joined: Mon Dec 15, 2014 11:04 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue May 08, 2018 1:43 am

Thanks for this works great,

Bill
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat May 19, 2018 12:18 am

Heads up , on the btest server 207.32.194.24 server , I just added some IP services Available-From settings.
I think the btest server is still running for everybody on the internet - however , for the IP services such as telnet , ssh , winbox , www , ftp connections , they are now blocked (except by my networks).

If I am correct - btest uses ports from 2000 on up , which is not one of the Mikrotik - IP - Services listed services.

If btest stops working , please let me know.

North Idaho Tom Jones


EDIT - added the note below:
Whoever is winbox/dude 213.57.88.215 , I am seeing a repeated connection every 30 seconds (every 30 seconds !)
Stop it , or explain it or I will have to block your network.
Or ... I may assume you are a potential hacker trying to break into my Mikrotik (possibly trying to use a recent vulnerability in ROS which Mikrotik has informed us about)

14:31:38 warning denied winbox/dude connect from 213.57.88.215
14:32:08 warning denied winbox/dude connect from 213.57.88.215
14:32:38 warning denied winbox/dude connect from 213.57.88.215
14:33:08 warning denied winbox/dude connect from 213.57.88.215
14:33:38 warning denied winbox/dude connect from 213.57.88.215


North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jun 08, 2018 10:13 pm

Recently , I was asked for a copy of the configuration I use on the 207.32.194.24 btest server.

Below is an export of the configuration. Note - the addres-list part of the export configuration was originally created by planetcoop who runs the other public btest server.

So for Mark Dyer and everybody else interested :



[admin@207-32-194-24-CHR-P10] /system package> print
Flags: X - disabled
# NAME VERSION SCHEDULED
0 X dude 6.42.3
1 routeros-x86 6.42.3
2 system 6.42.3
3 X ipv6 6.42.3
4 X ups 6.42.3
5 X wireless 6.42.3
6 X hotspot 6.42.3
7 X dhcp 6.42.3
8 X mpls 6.42.3
9 routing 6.42.3
10 X ppp 6.42.3
11 security 6.42.3
12 advanced-tools 6.42.3
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
[admin@207-32-194-24-CHR-P10] > export
# jun/08/2018 11:33:54 by RouterOS 6.42.3
# software id =
#
#
#

/interface ethernet
set [ find default-name=ether1 ] loop-protect=off

/queue simple
add burst-limit=1250M/0 burst-threshold=50M/0 burst-time=8m20s/0s max-limit=105M/0 name=Ether1-A-From-Internet target=ether1
add burst-limit=0/1250M burst-threshold=0/50M burst-time=0s/8m20s max-limit=0/105M name=Ether1-B-To-Internet target=ether1

/snmp community
###### If you use SNMP - then set your SNMP community settings here

/user group
add name=btest policy=test,winbox,romon,tikapp,!local,!telnet,!ssh,!ftp,!reboot,!read,!write,!policy,!password,!web,!sniff,!sensitive,!api,!dude
/user
add comment="system default user" group=full name=admin
add group=btest name=btest
#### set your admin password
#### set the password for the btest user to btest

/ip address
add address=207.32.194.24/26 interface=ether1 network=207.32.194.0
####### You need to change the above IP address for your network ether1 Internet connection

/ip dns
###### You need to insert your DNS servers here

/ip firewall address-list
add address=z.b.c.d/24 comment=00-00-Permanently-Allow-These-IP-Addresses list=tester
### You need to modify and add-repeat the aboce line for your IPs in your networks that you want to "Permanently-Allow"

add address=10.0.0.0/8 comment=01-06-Permanently-BLOCK-These-IP-Addresses list=blocklist
add address=172.16.0.0/12 comment=01-07-Permanently-BLOCK-These-IP-Addresses list=blocklist
add address=192.168.0.0/16 comment=01-08-Permanently-BLOCK-These-IP-Addresses list=blocklist
add address=138.117.109.222 list=blocklist
add address=185.34.121.32 list=blocklist
add address=162.253.51.242 comment=00-RS-BGP-Permanently-Allow-These-IP-Addresses list=tester
add address=50.235.23.218 comment=00-2btest-Permanently-Allow-These-IP-Addresses list=tester
add address=66.35.7.130 comment=00-RS-BGP-Permanently-Allow-These-IP-Addresses list=tester
add address=207.32.194.6 comment=00-00-Permanently-Allow-These-IP-Addresses list=tester
add address=207.32.194.26 comment=00-00-Permanently-Allow-These-IP-Addresses list=tester

/ip firewall raw
add action=accept chain=prerouting comment="testers accepted" src-address-list=tester
add action=drop chain=prerouting comment="previous testers drop" src-address-list=previous
add action=add-src-to-address-list address-list=tester address-list-timeout=2m chain=prerouting comment="add to tester" dst-port=2000-2100 protocol=tcp
add action=add-src-to-address-list address-list=tester address-list-timeout=2m chain=prerouting comment="add to tester" dst-port=2000-2100 protocol=udp
add action=add-src-to-address-list address-list=previous address-list-timeout=15m chain=prerouting comment="add to previous" dst-port=2000-2100 log=yes protocol=tcp
add action=add-src-to-address-list address-list=previous address-list-timeout=15m chain=prerouting comment="add to previous" dst-port=2000-2100 log=yes protocol=udp

/ip route
add distance=1 gateway=207.32.194.17

/ip service
set telnet address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,a.b.c.d/24,a.b.c.e/24
set ftp address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,a.b.c.d/24,a.b.c.e/24
set www address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,a.b.c.d/24,a.b.c.e/24
set ssh address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,a.b.c.d/24,a.b.c.e/24
set www-ssl address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,a.b.c.d/24,a.b.c.e/24
set api address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,a.b.c.d/24,a.b.c.e/24
set winbox address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,a.b.c.d/24,a.b.c.e/24
set api-ssl address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,a.b.c.d/24,a.b.c.e/24
##### Note - you need to change/modify the above ip-service a.b.c.d/24,a.b.c.e/24 so that a.b.c.d/24 and a.b.c.e/24 IP blocks are actually your IP networks

/snmp
set contact=207-32-194-24-CHR-P10 enabled=yes location=207-32-194-24-CHR-P10
### set the /snmp for your snmp information

/system clock
set time-zone-autodetect=no time-zone-name=America/Los_Angeles
##### set your system clock time-zone

/system hardware
set multi-cpu=no
##### Although this is a CHR running on a VmWare ESXi server , I only allocate 1 CPU core for me btest server to run with

/system identity
set name=207-32-194-24-CHR-P10
#### set your system identity

/system ntp client
##### Set your ntp client settings here

/system package update
set channel=release-candidate

/tool bandwidth-server
set max-sessions=500

/tool graphing interface
add

/tool netwatch
### I might suggest putting some of your gateway and upstream router IP address here


[admin@207-32-194-24-CHR-P10] >



If I missed anything - please let me know

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s) ROS 6.42.4

Wed Jun 20, 2018 4:07 am

June 19, 2018
Heads Up - FYI - I just updated the 207.32.194.24 btest server to version 6.42.4

If you have any problems with btest , please drop a posting here

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Jun 28, 2018 6:48 pm

June 26, 2018
Heads Up - FYI - I just updated the 207.32.194.24 btest server to version 6.42.5

If you have any problems with btest , please drop a posting here

North Idaho Tom Jones
 
shujanster
just joined
Posts: 24
Joined: Wed Apr 05, 2017 7:02 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jul 14, 2018 9:27 pm

June 26, 2018
Heads Up - FYI - I just updated the 207.32.194.24 btest server to version 6.42.5

If you have any problems with btest , please drop a posting here

North Idaho Tom Jones
Show me Can't Connect. i use 6.40.8. Thanks.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 20, 2018 9:24 pm

A typical Internet speedtest ( FYI - We use Mikrotik CHR routers )
You do not have the required permissions to view the files attached to this post.
 
Killian
just joined
Posts: 8
Joined: Thu Sep 01, 2016 11:04 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jul 28, 2018 10:34 am

Firstly thanks to Tom for providing this Service
I dunno if you guys can help me out, we have a 360Mb connection here based in Europe. I believe that we are having a few issues on the network where as we don't seem to be able to max out the connection from normal internet use, I am unsure if the issue is with the tcp bandwidth test having so many hops to Toms server or is the issue with our provider, before I call them out i would like a bit of reassurance that i am correct.
When testing to Tom's server I can pull the full 360Mb no problem at all but by TCP I can only pull ~200Mb across the link (Am taking the figures from the Ethernet Port "Combo 1")

UDP Test Result
https://imgur.com/a/cKCv71U

TCP Test Result
https://imgur.com/JFKziaW
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Jul 30, 2018 10:51 am

Check CPU load (per-CPU)
 
Killian
just joined
Posts: 8
Joined: Thu Sep 01, 2016 11:04 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jul 31, 2018 12:51 am

Check CPU load (per-CPU)
Thanks Chupaka, I have multi-queue-ethernet-default enabled for the interfaces combo1 and ether1-local "mq piffo" 100 packets.

CPU's included in screenshots below

UDP test
https://imgur.com/h84JwYJ
TCP Test
https://imgur.com/4LcP4k1
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Aug 15, 2018 6:14 pm

Sorry to say, btest.planetcoop.com is no longer available. I have completed my move and will be connecting the fiber service ASAP. It has been fun. If i am able to get the service at my new location i will bring it back up.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Aug 15, 2018 7:07 pm

It would be nice of others offered free public accessible btest servers in other locations around the world.

Although 1+ gig bteset servers are nice, I suspect that even some 100 meg btest servers would be very much welcome.

Any body interested in volinterring some bandwidth for some btest servers ?

North Idaho Tom Jones
(my btest server is 207.32.194.24 btest/btest)
 
angboontiong
Forum Guru
Forum Guru
Posts: 1136
Joined: Fri Jan 16, 2009 9:59 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Aug 20, 2018 1:29 pm

It would be nice of others offered free public accessible btest servers in other locations around the world.

Although 1+ gig bteset servers are nice, I suspect that even some 100 meg btest servers would be very much welcome.

Any body interested in volinterring some bandwidth for some btest servers ?

North Idaho Tom Jones
(my btest server is 207.32.194.24 btest/btest)
i just test, it run for awhile and now when i ping it become request time out..
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Aug 21, 2018 6:04 pm

It would be nice of others offered free public accessible btest servers in other locations around the world.

Although 1+ gig bteset servers are nice, I suspect that even some 100 meg btest servers would be very much welcome.

Any body interested in volinterring some bandwidth for some btest servers ?

North Idaho Tom Jones
(my btest server is 207.32.194.24 btest/btest)
i just test, it run for awhile and now when i ping it become request time out..
I have a firewall rule in the btest server. Connections to the btest server will eventually get blocked. Then the remote admin will need to wait for a timer to expire. After the btest FW timer expires, then the remote btest user can test again. Then is to help prevent abuse and/or excessive use - thus freeing up bandwidth for other btesters.

North Idaho Tom Jones
 
User avatar
macsrwe
Forum Guru
Forum Guru
Posts: 1007
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Aug 23, 2018 6:33 pm

(my btest server is 207.32.194.24 btest/btest)
Can't get connected to this any longer. Haven't used it previously, so it's not a hog timeout. Last time I used it, you had a different name and password, so it's been some time. Now I just get a long "connecting" and a "can't connect."
Screen Shot 2018-08-23 at 8.31.11 AM.jpg
You do not have the required permissions to view the files attached to this post.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

macsrwe re: Can't get connected to this any longer.

Thu Aug 23, 2018 10:09 pm

macsrwe re: Can't get connected to this any longer.

What IP address are you testing from ? I can look at the fw logs and see if your IP address shows up in there.

North Idaho Tom Jones (207.32.194.24 btest admin)
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Aug 23, 2018 10:15 pm

FYI - btest bandwidth usage

About an hour ago , I rebooted the 207.32.194.24 btest server
Now an hour later after I rebooted it , it has sent over 10+ Gib Bytes and received 3+ Gib Bytes in btest(s).

lol - take that 1 hour of time and stretch it out over 3 years , the btest(s) send -and- receive Bytes really start to add up to one heck of alot of Bytes.


North Idaho Tom Jones
 
User avatar
macsrwe
Forum Guru
Forum Guru
Posts: 1007
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: macsrwe re: Can't get connected to this any longer.

Thu Aug 23, 2018 10:16 pm

macsrwe re: Can't get connected to this any longer.

What IP address are you testing from ? I can look at the fw logs and see if your IP address shows up in there.

North Idaho Tom Jones (207.32.194.24 btest admin)
198....
Last edited by macsrwe on Thu Aug 23, 2018 11:24 pm, edited 1 time in total.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: macsrwe re: Can't get connected to this any longer.

Thu Aug 23, 2018 10:35 pm

macsrwe re: Can't get connected to this any longer.

What IP address are you testing from ? I can look at the fw logs and see if your IP address shows up in there.

North Idaho Tom Jones (207.32.194.24 btest admin)
198.233.88.218
I do see it is trying to connect - but no btest is starting ...
Hmmm , Try updating the ROS version of your Mikrotik to the latest. I am currently running 6.42.7
I think you might need to be on the same version
After you upgrade - give it a try again and let me know

North idaho Tom Jones
 
User avatar
macsrwe
Forum Guru
Forum Guru
Posts: 1007
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: macsrwe re: Can't get connected to this any longer.

Thu Aug 23, 2018 11:37 pm

I do see it is trying to connect - but no btest is starting ...
Hmmm , Try updating the ROS version of your Mikrotik to the latest. I am currently running 6.42.7
I think you might need to be on the same version
After you upgrade - give it a try again and let me know

North idaho Tom Jones
I upgraded a non-critical unit on my network and it worked. Then I tried a non-upgraded router and it also worked. Then I retried it from my edge router where it failed this morning, and this time it worked.

I blame Russians.

Thanks for your help.
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Sep 06, 2018 12:05 am

FYI - btest bandwidth usage

About an hour ago , I rebooted the 207.32.194.24 btest server
Now an hour later after I rebooted it , it has sent over 10+ Gib Bytes and received 3+ Gib Bytes in btest(s).

lol - take that 1 hour of time and stretch it out over 3 years , the btest(s) send -and- receive Bytes really start to add up to one heck of alot of Bytes.


North Idaho Tom Jones
Tom,

I was averaging 30TB total monthly in/out traffic with it on the 10gbps link. Crazy busy.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Sep 06, 2018 1:38 am

FYI - btest bandwidth usage

About an hour ago , I rebooted the 207.32.194.24 btest server
Now an hour later after I rebooted it , it has sent over 10+ Gib Bytes and received 3+ Gib Bytes in btest(s).

lol - take that 1 hour of time and stretch it out over 3 years , the btest(s) send -and- receive Bytes really start to add up to one heck of alot of Bytes.


North Idaho Tom Jones
Tom,

I was averaging 30TB total monthly in/out traffic with it on the 10gbps link. Crazy busy.
Same monthly averages here - 20 to 60 TB every month on the 207.32.194.24 btest server
 
Temorizador
just joined
Posts: 16
Joined: Fri Aug 25, 2017 6:25 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Sep 11, 2018 3:31 am

Gracias por el servicio ofrecido ,es muy útil para probar los mikrotiks , para ver su poder y si el ISP ofrece realmente lo que venden tan caro :-) .

saludos
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Thanks for the service offered, it is very useful for testing the mikrotiks, to see their power and if the ISP really offers what they sell so expensive :-).

regards
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Sep 11, 2018 5:56 pm

Gracias por el servicio ofrecido ,es muy útil para probar los mikrotiks , para ver su poder y si el ISP ofrece realmente lo que venden tan caro :-) .

saludos
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Thanks for the service offered, it is very useful for testing the mikrotiks, to see their power and if the ISP really offers what they sell so expensive :-).

regards
:)
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Sep 11, 2018 6:02 pm

The public access btest server 207.32.194.24 was just now updated to 6.43

North Idaho Tom Jones
 
tabate47
Long time Member
Long time Member
Posts: 510
Joined: Wed Mar 13, 2013 5:23 am
Location: Los Angeles

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Sep 14, 2018 12:42 am

We've used the public server for a long time with no issues. For the last few days we are unable to connect. We use tcp. We are getting either connect which just hangs, or Device incompatible . We tried to set the connect count to 1 and it immediately disconnects. Did something change recently? We are on the latest bug fix release.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Sep 14, 2018 4:40 am

We've used the public server for a long time with no issues. For the last few days we are unable to connect. We use tcp. We are getting either connect which just hangs, or Device incompatible . We tried to set the connect count to 1 and it immediately disconnects. Did something change recently? We are on the latest bug fix release.
I might be wrong here - but I believe I recently read that a Mikrotik btest client (one of your Mikrotiks) now needs to be the same ROS version at the Mikrotik btest server (if passwords are used).
My 207.32.194.24 btest server uses user=btest and password=btest , thus I suspect the client Mikrotik needs to be the same ROS version.
I am currently using ROS version 6.43

So - as a test , try upgrading a client btest Mikrotik to ROS version 6.43 and see if it works.

Note 1: A couple of days ago , I had somebody pm me about their btest not running to my btest server , they then upgraded to 6.43 and the btest worked.

Note 2: I think I also read that if there is no btest password configured on the btest server (or authentication not enabled "don't remember exactly" ) that any cleint of any ROS version can then perform a btest


Please try upgrading a client btest Mikrotik and test it - and - please post her to let me know if I am correct about the matching ROS versions if btest passwords are used.


Also of note - a possible work-around with different ROS versions might be for me to create a second btest user on my btest server that does not have a password. I will have to look into what security issues that opens up if not configured correctly on my btest server.


North Idaho Tom Jones
 
tabate47
Long time Member
Long time Member
Posts: 510
Joined: Wed Mar 13, 2013 5:23 am
Location: Los Angeles

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Sep 14, 2018 5:24 am

Tom,

You are correct. Here is the changelog:

MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - added IPv6 support;
!) cloud - added support for licensed CHR instances (including trial);
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
!) winbox - minimal required version is v3.15;

Would you be able to create another user? It doesn't seem like it would be an issue because everyone knows the password anyway. If you can't, then everyone would need to be on your ros version which won't work for a lot of setups. If you could, that would be great. Thanks for all the help.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Sep 14, 2018 1:35 pm

Maybe the authentication requirement on the public btest servers should be switched off. What is its meaning when the user and password is publicly known?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Sep 14, 2018 6:09 pm

Wow - somebody has a fast Internet connection :)
This image is from my 207.32.194.24 btest server just a few minutes ago.
You do not have the required permissions to view the files attached to this post.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Sep 18, 2018 5:51 pm

This morning I upgraded the 207.32.194.24 btest server to 6.43.1
 
HMHackMaster
just joined
Posts: 3
Joined: Thu Jan 25, 2018 1:43 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Sep 25, 2018 4:37 pm

Wow - somebody has a fast Internet connection :)
This image is from my 207.32.194.24 btest server just a few minutes ago.
Thanks for running this bandwidth test server by the way!

I was able to get a 1.5Gbit test from my newly acquired 10G line but I wasn't able to grab a screenshot of it in time. Just waiting patiently for the rate limiting to settle down so I can try again.

It's hard nowadays to validate that ISPs actually deliver on what they promise, so I really appreciate you running this for free!

[If ya wanna break some graphs, I would love to schedule a time and see what happens without a rate limit! :) ]
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Sep 25, 2018 5:55 pm

I just upgraded the 207.32.194.24 btest server to : Ver 6.43.2

As always , you may want to consider upgrading your Mikrotik also to 6.43.2 and then run a btest

North Idaho Tom Jones
 
780user
just joined
Posts: 1
Joined: Mon Oct 01, 2018 11:04 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Oct 01, 2018 11:07 pm

Thanks a lot for hosting and maintaning this service!

Any idea what could be wrong? Tried connecting the last 3-4 days..
You do not have the required permissions to view the files attached to this post.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Oct 02, 2018 12:02 pm

Could be beneficial to someone if I would open the 100/100 Mbit/s public btest server in Europe? Just asking in advance...
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Oct 02, 2018 6:20 pm

Could be beneficial to someone if I would open the 100/100 Mbit/s public btest server in Europe? Just asking in advance...
I know a btest server in Europe would be used by many :)
North Idaho Tom Jones
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Oct 02, 2018 8:27 pm

For sure, but the 100mbits limitation might be problematic. Also I couldn't guarantee such speed to be achievable always, which could lead to lower measurements. Therefore the question if such thing makes sense.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Oct 03, 2018 4:34 am

For sure, but the 100mbits limitation might be problematic. Also I couldn't guarantee such speed to be achievable always, which could lead to lower measurements. Therefore the question if such thing makes sense.
On the forum , your server could be listed as the following limitations (what ever you want worded)
- no guarantee on bandwidth availablility for btest (ing)
- no guarantee on low/hi measurements

EDIT: Below is an export of my btest config. It includes a simple-queue which can be changed for your limits:

/interface ethernet
set [ find default-name=ether1 ] advertise=1000M-full loop-protect=off
/queue simple
add burst-limit=1250M/0 burst-threshold=50M/0 burst-time=8m20s/0s max-limit=105M/0 name=Ether1-A-From-Internet target=ether1
add burst-limit=0/1250M burst-threshold=0/50M burst-time=0s/8m20s max-limit=0/105M name=Ether1-B-To-Internet target=ether1
/user group
add name=btest policy=test,winbox,romon,tikapp,!local,!telnet,!ssh,!ftp,!reboot,!read,!write,!policy,!password,!web,!sniff,!sensitive,!api,!dude
/ip firewall address-list
add address=207.32.193.0/24 comment=00-05-Permanently-Allow-These-IP-Addresses list=tester
add address=10.0.0.0/8 comment=01-06-Permanently-BLOCK-These-IP-Addresses list=blocklist
add address=172.16.0.0/12 comment=01-07-Permanently-BLOCK-These-IP-Addresses list=blocklist
add address=192.168.0.0/16 comment=01-08-Permanently-BLOCK-These-IP-Addresses list=blocklist
add address=138.117.109.222 list=blocklist
add address=185.34.121.32 list=blocklist
add address=162.253.51.242 comment=00-RS-BGP-Permanently-Allow-These-IP-Addresses list=tester
add address=50.235.23.218 comment=00-2btest-Permanently-Allow-These-IP-Addresses list=tester
add address=66.35.7.130 comment=00-RS-BGP-Permanently-Allow-These-IP-Addresses list=tester
add address=207.32.194.6 comment=00-00-Permanently-Allow-These-IP-Addresses list=tester
add address=207.32.194.26 comment=00-00-Permanently-Allow-These-IP-Addresses list=tester
/ip firewall raw
add action=accept chain=prerouting comment="testers accepted" src-address-list=tester
add action=drop chain=prerouting comment="previous testers drop" src-address-list=previous
add action=add-src-to-address-list address-list=tester address-list-timeout=2m chain=prerouting comment="add to tester" dst-port=2000-2100 protocol=tcp
add action=add-src-to-address-list address-list=tester address-list-timeout=2m chain=prerouting comment="add to tester" dst-port=2000-2100 protocol=udp
add action=add-src-to-address-list address-list=previous address-list-timeout=15m chain=prerouting comment="add to previous" dst-port=2000-2100 log=yes protocol=tcp
add action=add-src-to-address-list address-list=previous address-list-timeout=15m chain=prerouting comment="add to previous" dst-port=2000-2100 log=yes protocol=udp
/ip service
set telnet address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,207.32.193.0/24
set ftp address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,207.32.193.0/24
set www address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,207.32.193.0/24
set ssh address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,207.32.193.0/24
set www-ssl address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,207.32.193.0/24
set api address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,207.32.193.0/24
set winbox address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,207.32.193.0/24
set api-ssl address=192.168.0.0/16,10.0.0.0/8,172.16.0.0/12,207.32.193.0/24
/tool bandwidth-server
set max-sessions=500
/tool graphing interface
add


 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Oct 03, 2018 1:07 pm

Thanks Tom, I am still far from the moment I could use it, I need to see if there is any demand first.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Oct 03, 2018 1:28 pm

Why not just start from opening it in 'demo' mode and look at BTest traffic? :)
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Oct 03, 2018 1:34 pm

Because it requires some effort and costs.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Oct 03, 2018 3:38 pm

jarda , if you decide to open up a btest server …
--- You will become rich
--- Women will flock around you for your attention
--- You will win every game at casinos and lottery
--- Your network will run faster
--- You will have lots of free time
----------or----------
--- You will go broke paying for the additional bandwidth of a btest server
--- Other that your wife , nobody knows who you are
--- You will still be a looser at everything you do
--- Your network will be slower because it now experiences high bandwidth btest loads
--- You will be busy answering questions (via this forum, email, facebook and PM) about why they can't btest to you
----------or----------
--- Somewhere between the maximums there is a medium

lol
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Oct 03, 2018 4:21 pm

--- Other that your wife , nobody knows who you are
Huh, it's just about me :)
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Oct 03, 2018 5:46 pm

--- Other that your wife , nobody knows who you are
Huh, it's just about me :)
lol :lol:
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Oct 03, 2018 5:53 pm

Anybody remember my original post that eventually led to a public btest server ?
I made a suggestion about everybody participating in a btest day for everybody to btest to/from to measure bandwidth around the world. Then somebody made a post stating
"The day the Internet broke".


Anyways , I believe all of us Mikrotik admins would welcome any public access btest servers of any speeds/capabilities.

North Idaho Tom Jones
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Oct 03, 2018 8:42 pm

Tom, it might be even much worse anyway.

The public btest server could be one of the side effects of other of my ideas, and it might take a while, but I believe I will open it finally.
 
datispro
just joined
Posts: 4
Joined: Mon Sep 17, 2018 11:19 am
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Oct 12, 2018 6:49 pm

i need bandwidth test server from Turkey location . please help me is is there any server in turkey.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Oct 12, 2018 11:01 pm

i need bandwidth test server from Turkey location . please help me is is there any server in turkey.
As for public btest access and posted here in this forum about any Mikrotik btest server(s) , My 207.32.194.24 btest server is the only one I know of at this time.

North Idaho Tom Jones
 
dadoremix
Member Candidate
Member Candidate
Posts: 133
Joined: Sat May 14, 2011 11:31 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Oct 27, 2018 7:10 pm

@North Idaho Tom Jones
btest dead ?
 
Khuseyn
just joined
Posts: 2
Joined: Sat Oct 27, 2018 10:07 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Oct 27, 2018 10:28 pm

Thanks for running this bandwidth test server :!: :!: :!:

Please tell me how to create a script to record the test results to the log or send to the mail?
 
Khuseyn
just joined
Posts: 2
Joined: Sat Oct 27, 2018 10:07 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Oct 27, 2018 10:32 pm

after what time can repeat testing?
I think re-check for a short time is blocked.
 
zakynthoswifi
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jul 17, 2014 12:38 am
Location: Zakynthos
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Nov 25, 2018 12:51 am

Hi tom,
I'm getting after a speedtest on your server several incoming attempts from port scans from your ip. please check your router... currently I have blocked your ip. Thanks for this server
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Nov 26, 2018 8:20 pm

Hi tom,
I'm getting after a speedtest on your server several incoming attempts from port scans from your ip. please check your router... currently I have blocked your ip. Thanks for this server
hmmm, My btest server should be clean and normal. I just rebooted it.

However , I have sometimes seen a stuck btest. Example - a remote btest is started and the remote Mikrotik device looses connectivity to the Internet which a few times has resulted in the btest server still running. This is rare when it happens. The solution is normally to reboot the btest server or the btest client then the problem stops. This used to happen only when under loads greater than 2-gig sustained - however I have not seen btest get stuck in at least 1/2 a year now...

Of note - I have mostly seen stuck btest(s) on x86 Mikrotiks or slower physical Mikrotiks devices running btest. I have never seen a CHR to CHR stuck btest with vmxnet3 10-gig network interfaces - but in the past , I have seen it a few times with just about everything else (other than a CHR) when a btest is saturating a link.

North Idaho Tom Jones
 
brahma
just joined
Posts: 1
Joined: Tue Nov 27, 2018 7:44 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Nov 27, 2018 7:58 am

i made a btest server ip-103.80.55.2 with no user and password . take a test and enjoj
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Nov 27, 2018 5:52 pm

i made a btest server ip-103.80.55.2 with no user and password . take a test and enjoj
Nice :)

I just ran some btest(s) from my 207.32.194.24 btest server to your 103.80.55.2 btest server.
UDP send test and UDP receive btest each way comes close to 150 meg (130 to 148 meg).
TCP send test and TCP receive test each btest at around 80 meg.

Is this going to be a perminate btest server ?
Where are you located ?
What kind of Mikrotik hardware/software are you using ?
How fast under perfect conditions should somebody be able to btest to ?
Are you using any rate-limiting queues fire-wall rules so that you do not have continous never go away sustained btest (btest abusers) ?
Do you have a btest policy/user-rules you would like to state ?
Would you like me to post/edit-add information about your btest server on the 1'st post in this btest forum?

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s) now 6.43.7

Tue Dec 04, 2018 2:47 am

December 3rd 4:45 PM (Idaho time)
I just now upgraded the 207.32.194.24 btest server to version 6.43.7


North Idaho Tom Jones
 
netflow
Frequent Visitor
Frequent Visitor
Posts: 94
Joined: Sat Oct 01, 2016 3:53 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 05, 2018 12:17 am

Hi Tom,

This is a great service, thanks for offering to the community.

For me it works about 20 sec, then traffic is completely blocked for XX minutes. I am not sure if it is by design but this turns out to be a bit short to do any sort of stability controls. Tested using UDP with a 100mbps symmetrical connection.
 
netflow
Frequent Visitor
Frequent Visitor
Posts: 94
Joined: Sat Oct 01, 2016 3:53 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 05, 2018 12:35 am

For me it works about 20 sec, then traffic is completely blocked for XX minutes. I am not sure if it is by design but this turns out to be a bit short to do any sort of stability controls. Tested using UDP with a 100mbps symmetrical connection.
My bad actually, I have an automatic synflood rule that kicks in.
Maybe BTest is not behaving nicely with this regards. Sorry.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 05, 2018 1:36 am

For me it works about 20 sec, then traffic is completely blocked for XX minutes. I am not sure if it is by design but this turns out to be a bit short to do any sort of stability controls. Tested using UDP with a 100mbps symmetrical connection.
My bad actually, I have an automatic synflood rule that kicks in.
Maybe BTest is not behaving nicely with this regards. Sorry.
Yea - I have a Simple-Queue that kicks in. Below is my Simple-Queue in detail
btest-simpe-queue-detail.png
You do not have the required permissions to view the files attached to this post.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 24, 2018 7:13 pm

Heads up
I just upgraded the 207.32.194.24 btest server from 6.43.7 to 6.43.8

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 24, 2018 7:57 pm

Yo , heads up to --> 131-161-104-26.rev.netcorporativa.com.br


The btest server 207.32.194.24 is intended for brief btest speed testing to show your maximum peak throughput. When any btester holds executes and holds an extended continouis btest, the simple-queue settings will kick in and limit all btest sessions for all btesters to a combined 105 Meg maximum. This means that a Mikrotik admin that would may normally acheive 1-Gig on a btest to my server will now get 105 Meg or less (because somebody is not performing a brief btest and instead keeping an extended btest session running which will then have negative slower results for anybody else also measuring a btest throughput speed test.

FYI

North Idaho Tom Jones
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 25, 2018 11:32 pm

What about using PCQ Bursting for this? So it will affect only bad IPs, and total bursting can be relaxed or removed :)
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 26, 2018 6:52 pm

What about using PCQ Bursting for this? So it will affect only bad IPs, and total bursting can be relaxed or removed :)
I like the idea of PCQ , however (if I am correct in my thinking) it would then be possible to have a degrading effect on my Internet feeds to my customers. With PCQs, it would then be possible to have a combined total btest throughput load greater than my Internet feeds can support which could then possibly have a negative impact effect on my many customer connections to the Internet.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 26, 2018 7:08 pm

You can still leave max-limit and total queue burst in place, just with possibly higher values
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Feb 06, 2019 5:51 pm

Feb 6th (7:50 AM PST - North Idaho USA time) , I just now updated the public btest server 207.32.194.24 from ROS version 6.43.8 to ROS version 6.43.11


If you notice any strange problems after the btest server ROS upgrade , please let me know


North Idaho Tom Jones
 
neutronlaser
Member
Member
Posts: 445
Joined: Thu Jan 18, 2018 5:18 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Feb 17, 2019 9:33 pm

How do you host a server?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Feb 18, 2019 10:43 pm

How do you host a server?
Re: How do you host a ( btest ) server ?
Answer - From North Idaho Tom Jones - admin for btest server 207.32.194.24

Hosting a btest server:
- 1st ; Mikrotik does not oficially endorse or host any btest servers that I know of. Back in 2016, I just made a btest server and posted it to the Mikrotik forums.
- 2nd ; All you need to do is the following:
-- a) configure a Mikrotik (I use a CHR) with a live IP address (so that remote Internet btest-ers can test to it ( TCP send & receive and also UDP send & receive )
-- b) disable any firewalls on the btest server (My btest server does not have any firewalls , I did this so that remote btesters and performs btests to/from it).
--c) on the new btest server you are creating , crease a " btest " user and a " btest " group.
My " btest " user is a member of the " btest " group
My " btest " group has only the following Policies checked " test & winbox & romon & tik.app "
--d) under IP Services , modify every IP Service to only have your IP addresses.
example: winbox Port 8282 should have one or multiple entires for your IP addresses
Note: Use IP Services to pervent others out on the Internet from telnet-ing and/or ssh-ing and/or winbox-ing (an entry for each service)

Then after your new btest server is up and running , simply post here in this forum your IP address and btest user name and password ( I would assume btest and btest ) along with information about where you are , who you are, and what speeds your server can handle for btesting , also include any policy you would like to state so that others can follow your desired btest server policies.
I will then add your btest server to the first posting of this Mikrotik btest forum topic.
If/when you have your btest server running, you are welcome to private message me so that I can take a look at it to make sure everyting looks OK.
If you would like some help , just PM me and I can winbox into your new btest server and configure it for you.

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Feb 18, 2019 10:50 pm

Info - I just updated the 207.32.194.24 btest server from 6.43.11 to 6.43.12

North Idaho Tom Jones
 
agusttt
just joined
Posts: 4
Joined: Thu Aug 15, 2013 6:33 pm
Location: Montevideo, Uruguay

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Feb 20, 2019 9:46 pm

i cannot thank you enough for this
 
gotsprings
Forum Guru
Forum Guru
Posts: 2087
Joined: Mon May 14, 2012 9:30 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Feb 22, 2019 8:09 pm

Info - I just updated the 207.32.194.24 btest server from 6.43.11 to 6.43.12

North Idaho Tom Jones
THANK YOU!!!
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 26, 2019 9:59 pm

Info - I just updated the 207.32.194.24 btest server from 6.43.12 to 6.44

North Idaho Tom Jones


- and - also check this out …
Martooo has spun up a btest server
Here is a link to his Mikrotik forum topic: viewtopic.php?f=2&t=145303
 
neutronlaser
Member
Member
Posts: 445
Joined: Thu Jan 18, 2018 5:18 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Mar 01, 2019 3:47 pm

How do you run a bandwidth server on linux?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Mar 01, 2019 5:56 pm

How do you run a bandwidth server on linux?
Hmmm … How do you run a bandwidth server on linux?

Well , If I were to run a " btest " server on a Linux operating system , I would do it this way:
- 1st , install VMware ESX. This is a free hypervisor for systems such as Linux.
Note - not to be confused with VMware ESXi (which also has a Unix/BSD/Linux operating system)
- 2 , with VMware ESX , you should now be able to run several different guest operating systems at the same time.
- 3 , next , I would purchase a 64-bit Mikrotik router operating system ( CHR )
- 4 , that's 99 percent what to do , the other 1 percent is just basic configuration.

--- Another possible way to do this at zero cost , I have not tested this but it should work ---
- 1st , install Wine on your Linux operating system (Wine lets you run in a near windows environment)
- 2nd , download from Mikrotik something called " btest ". This is a Mikrotik program which will perform btest's both as a client and as a server. ( I've used Mikrotik's btest program on my Windows computers to test network throughput ).


North Idaho Tom Jones
 
neutronlaser
Member
Member
Posts: 445
Joined: Thu Jan 18, 2018 5:18 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Mar 05, 2019 3:05 am

Bizarre there is no linux program from mikrotik that does this
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Mar 14, 2019 5:05 pm

1st - As of this posting right now (March 14th 2019) , this forum topic "Public-Mikrotik-Bandwidth-Test-Server(s)" which was started around 3 years ago currently has 332,700 views.
Anybody have a prediction when this topic will hit 1/3 of a million (333,333) views ?
My guess is around the last day of this month.

2nd - This is more of a Mikrotik new-feature wish list:
I would like to see a new optional Mikrotik ROS package which can perform http speedtests between Mikrotiks and client connected computers (something similar to http://my-mikrotik-IP-address/speed-btest).
… Where an optional login/password could be used to perform a http UDP-or-TCP up-or-down bandwidth test
… Where a client computer behind NATted Mikrotik could perform speedtests to their inside Mikrotik gateway IP address , and/or to any Mikrotik IP address out on the Internet.
… Where the Mikrotik admin has some control for maximum bandwidth, number of simultaneous speed-btest testers, and setting to limit how often a client can perform a http speed-btest.
… The Mikrotik http speed-btest should be a simple TCP-up, then TCP-down, then UDP-up then UDP down, followed by a round-trip-ping response time.
… The output after the http speed-btest could then report all kinds of information , including the number of dropped packets during each test -and- it would also be nice to show at what speeds RED ( Random Early Detection ) begins kicking in with dropped packets.
I suspect this type of a Speed-btest server could become very very popular. And the http speed-btest web page could show some pre-configured ISP hosting information and a URL indicating "Powered by Mikrotik" which links to Mikrotik. Mikrotik just might get a boost in sales from something like this.

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Mar 14, 2019 6:57 pm

FYI - I just now (March 14th 2019) updated the public btest server 207.32.194.24
was ROS version 6.44
now ROS version 6.44.1

If you experience any issues after the update - please let me know

North Idaho Tom Jones
 
neutronlaser
Member
Member
Posts: 445
Joined: Thu Jan 18, 2018 5:18 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Mar 28, 2019 10:48 pm

Mikrotik provide test servers
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Mar 29, 2019 1:35 am

Mikrotik provide test servers
Re : Mikrotik provide test servers

Are you asking " Does Mikrotik provide public btest servers to test to ? "
Answer: No (at least I don't think so)

Are you asking " Does Mikrotik provide (free) physical routers to host a public btest server ? "
Answer: No

Are you asking " Does Mikrotik provide free ROS (CHR) software to host a public btest server? "
Answer: No

Are you asking " Does Mikrotik offset your expense to host a public btest server? "
Answer: No

Are you asking " What are the benefits of hosting a public btest server? "
Answer: You will help hundreds/thousands/tens-of-thousands of network admins by letting them test to your public btest server.

Are you asking " Do I need permission from Mikrotik to host a free public btest server? "
Answer: No

North Idaho Tom Jones
private owner of the public btest server 207.32.194.24 since January 2016
 
neutronlaser
Member
Member
Posts: 445
Joined: Thu Jan 18, 2018 5:18 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Mar 29, 2019 2:01 am

No, telling them to provide servers like ubiquiti do
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Mar 29, 2019 10:45 am

No, telling them to provide servers like ubiquiti do
I think it's much easier to add speedtest.net client - they have servers all over the world :)
 
vic45708
just joined
Posts: 9
Joined: Tue Dec 28, 2010 4:37 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Apr 03, 2019 2:44 am

Are any of the servers still available to test 2 routers?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Apr 03, 2019 6:23 pm

Are any of the servers still available to test 2 routers?
My btest server 207.32.194.24 is still available to btest to.

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Apr 03, 2019 6:27 pm

No, telling them to provide servers like ubiquiti do
I think it's much easier to add speedtest.net client - they have servers all over the world :)
It would be nice if Mikrotik came out with an optional ROS server package which would allow computers to perform http speedtests to a Mikrotik.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Apr 04, 2019 6:05 pm

FYI - the public access 207.32.194.24 btest server was just now upgraded from ROS 6.44.1 to ROS 6.44.2

North Idaho Tom Jones
 
azol
just joined
Posts: 4
Joined: Thu Sep 28, 2017 5:06 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Apr 10, 2019 12:10 pm

Any IPv6 btest servers?
 
phin
just joined
Posts: 19
Joined: Mon Dec 04, 2017 11:25 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Apr 13, 2019 8:04 pm

Unable to connect as of today.
 
User avatar
Tonete
just joined
Posts: 5
Joined: Wed Oct 03, 2018 10:46 am
Location: Granada - SPAIN

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Apr 14, 2019 12:12 pm

System upgraded, but unable to connect Tom's btest Server.
 
neutronlaser
Member
Member
Posts: 445
Joined: Thu Jan 18, 2018 5:18 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Apr 14, 2019 2:39 pm

No, telling them to provide servers like ubiquiti do
I think it's much easier to add speedtest.net client - they have servers all over the world :)
It would be nice if Mikrotik came out with an optional ROS server package which would allow computers to perform http speedtests to a Mikrotik.
Be good if they came up with a simple Linux script you could run to host a test server, or have RouterOS test using standard files that the Speedtest web sites use like 100MB bin files.
 
apetryk
just joined
Posts: 12
Joined: Thu Sep 01, 2011 3:14 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Apr 14, 2019 8:26 pm

Unable to connect as of today.
Same here.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Apr 15, 2019 5:45 pm

Re : unable to connect

Try it now

I just rebooted the btest server

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Apr 15, 2019 5:49 pm

Holey smokes …
5 seconds after rebooting the btest server ( 207.32.194.24 ) , I had 3 btesters connected to it.
Either we have some automated bot btesters running or some in this forum are very fast at reading my prior post and then btesting -or- a combination of both.

North Idaho Tom Jones
 
deathandtaxes
just joined
Posts: 9
Joined: Fri Jun 23, 2017 5:20 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Apr 24, 2019 11:12 pm

unable to connect to 207.32.194.24
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Apr 25, 2019 12:00 am

FYI - just now ( April 24th 2019 @ 2PM North Idaho time )
I updated/upgraded the 207.32.194.24 public access btest server
From: ROS version 6.44.2
To: ROS version 6.44.3

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Apr 25, 2019 1:07 am

FYI

On average, per every 15 minutes , my 207.32.194.24 btest server will have around 30 different/unique IP addresses of remote Mikrotik devices which have performed a btest.
That's an average of a btest session starting every 30 seconds.

For the last 30 days , the 207.32.194.24 btest server as a 30 day sustained average rate transfer of :
35 meg-bits-per-second to the remote btest client
20 meg-bit-per-second from the remote btest clinet
Combined up/down is 55 meg-bits-per-second

Now a little math to calculate bits per year at current rate : ( ( ( ( 55 meg-bits-per-second * 60 ) * 60 ) * 24 ) * 365 ) = 1,734,480,000,000,000 bits
- that's 1,734 terra-bits !!! also known as 217 terra-bytes
- - - Question - When is the last time you moved 217 terra-bytes to/from the Internet that was not directly related to your Internet customer traffic ?

Note - the above data is "average" not "peak" !

North Idaho Tom Jones
 
dadoremix
Member Candidate
Member Candidate
Posts: 133
Joined: Sat May 14, 2011 11:31 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed May 01, 2019 12:31 pm

btest still working ?
from croatia not working
207.32.194.24
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed May 01, 2019 5:45 pm

btest still working ?
from croatia not working
207.32.194.24
I had to reboot it ?

Strange , this is the 3rd time in the last few months I had to reboot it.

The problem started 1 or 2 or 3 ROS versions ago.
What happens is the "BTest-Server-Settings" [x] Enabled and the [x] Authenticate check boxes both somehow become un-checked.
When I reboot my 207.32.194.24 CHR btest server, it comes back with both settings checked again.
Strange … … …
I have not made any changes to the btest server for more than a year - except when a new version of ROS comes out , then I upgrade it.

Is anybody else seeing other strange problems with btest servers or related strange things since the last version (or two) of ROS ?

If it happens again in the near future , I'll send info to Mikrotik's tech support and let them know what I am experiencing with the 207.32.194.24 btest server.

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed May 01, 2019 5:57 pm

Little help here …
I am just now starting to work with IPv6 , grrrrrr
Although I've been doing IP networking for almost 30 years now , I've never played with IPv6
My bad
Anyways, I have setup a test Mikrotik running IPv4 and IPv6 ( not the 207.32.194.24 server) , and I wish to ask if somebody has a IPv6 Mikrotik I can perform a few IPv6 btest(s) to/from.
If somebody is willing to assist, you can post here or PM me.

(FYI - my test IPv6 Mikrotik is on another ISP network I do not manage)
When I get IPv6 running on my network, I may create two more btest servers so that I end up with 3 btest servers. 1-Only IPv4 , 2-Only IPv6, 3-IPv4&IPv6 btest servers. (If Mikrotik is willing to donate the CHR software when I have IPv6 running on my ISP network).


North Idaho Tom Jones
 
sims
just joined
Posts: 6
Joined: Wed Jun 08, 2016 8:30 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue May 21, 2019 1:29 am

Hello,
is btest 207.32.194.24 working? I tried from 3 different locations with 6.44.1 and 6.44.3 but without any luck.

Thanks
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue May 21, 2019 2:09 am

Hello,
is btest 207.32.194.24 working? I tried from 3 different locations with 6.44.1 and 6.44.3 but without any luck.

Thanks
Nope - The 207.32.194.24 btest server was down again.
I just rebooted it - it is now up again
It looks like it quit working May 16th at about 8PM PST (Los Angeles time)

The 207.32.194.24 btest server somehow had both the btest enabled & authenticate unchecked.
A reboot of the btest server got it back on-line without making any changes.
I am pretty sure this is a Mikrotik CHR ROS problem - because I have not made any changes to it this year.
Hey Mikrotik - you reading this - I suspect there may be something going on ….

North Idaho Tom Jones
 
sims
just joined
Posts: 6
Joined: Wed Jun 08, 2016 8:30 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue May 21, 2019 7:54 pm

Hello,
is btest 207.32.194.24 working? I tried from 3 different locations with 6.44.1 and 6.44.3 but without any luck.

Thanks
Nope - The 207.32.194.24 btest server was down again.
I just rebooted it - it is now up again
It looks like it quit working May 16th at about 8PM PST (Los Angeles time)

The 207.32.194.24 btest server somehow had both the btest enabled & authenticate unchecked.
A reboot of the btest server got it back on-line without making any changes.
I am pretty sure this is a Mikrotik CHR ROS problem - because I have not made any changes to it this year.
Hey Mikrotik - you reading this - I suspect there may be something going on ….

North Idaho Tom Jones
Thanks all good :)
Hope mikrotik will fix this bug, keep on the good job
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu May 23, 2019 6:52 pm

Well - rather strange - but It looks like a found a Band-Aid solution temp fix which appears to keep the 207.32.194.24 btest server on-line and available without the random problem where the btest server keeps disabling itself.
What I did was this:
- disable all IP services on the Mikrotik CHR except for www
- change the default www port from 80 to another port number

If you encounter problems with the 207.32.194.24 btest server not responding, please post & let me know.

FYI - I suspect other tik devices could possibly be experiencing the same issue where the IP service (btest in my case) for no reason suddenly quits.

North Idaho Tom Jones
 
danriis
just joined
Posts: 17
Joined: Wed May 29, 2019 1:52 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu May 30, 2019 9:40 am

Thanks for making this available, unfortunately I'm not able to make it work. I have the latest packages and firmware, just updated today.
Any thoughts on why it's not working?
 
jimvam
just joined
Posts: 8
Joined: Tue Aug 05, 2014 11:07 pm
Location: Crete
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jun 04, 2019 7:58 am

For me is out as well!
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jun 04, 2019 5:14 pm

K - I just rebooted it - give it a try now
 
danriis
just joined
Posts: 17
Joined: Wed May 29, 2019 1:52 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jun 05, 2019 1:54 am

Tried again, no luck, it does seem to connect now but no throughput, here's a screenshot:

[mod@MikroTikLV] > /tool bandwidth-test 207.32.195.2 user=btest password=btest protocol=udp duration=30 direction=receive
status: connecting
rx-current: 0bps
rx-10-second-average: 0bps
rx-total-average: 0bps
lost-packets: 0
random-data: no
direction: receive
rx-size: 1500
connection-count: 20
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jun 05, 2019 2:27 am

Tried again, no luck, it does seem to connect now but no throughput, here's a screenshot:

[mod@MikroTikLV] > /tool bandwidth-test 207.32.195.2 user=btest password=btest protocol=udp duration=30 direction=receive
status: connecting
rx-current: 0bps
rx-10-second-average: 0bps
rx-total-average: 0bps
lost-packets: 0
random-data: no
direction: receive
rx-size: 1500
connection-count: 20
hmmm - Some time ago it was 207.32.195.2 - but it was changes around a year ago to 207.32.194.24 ( read the posts )
North Idaho Tom Jones :)
 
danriis
just joined
Posts: 17
Joined: Wed May 29, 2019 1:52 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jun 05, 2019 4:17 am

Thanks Tom, I did browse through many pages trying to find the latest syntax but apparently missed it. Works great now, really appreciate it.
Dan
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jun 05, 2019 5:58 pm

Thanks Tom, I did browse through many pages trying to find the latest syntax but apparently missed it. Works great now, really appreciate it.
Dan
Dan - you're a good man :)
I don't care about any mistakes and/or overlooks you make - lol

Happy to know yer working now

North Idaho Tom Jones
 
dadoremix
Member Candidate
Member Candidate
Posts: 133
Joined: Sat May 14, 2011 11:31 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jun 05, 2019 6:07 pm

Again not working??

User pass btest
Disconnected

Without pass say auth faild

 
User avatar
evince
Member
Member
Posts: 353
Joined: Thu Jul 05, 2012 12:11 pm
Location: Harzé - Belgique
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Jun 06, 2019 2:28 pm

Same problem today, unable to connect :(
 
kuklei
just joined
Posts: 4
Joined: Fri Nov 04, 2011 1:02 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jun 12, 2019 3:06 pm

same today. Btest server down. I guess its because this is the only server available and many users flood it. Sorry to see only North Idaho Tom Jones hosting one. Someone should step up and offer more severs for the community. We cant realistically expect that only one server will quench the thirst of mikrotik users worldwide.

Thanks NITJ for the service so far. KUDOS
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jul 02, 2019 2:14 am

Some good news :D

The btest server 207.32.194.24 is now also IPv6 :)

IPv4 address: 207.32.194.24
IPv6 address: 2605:4e40:0:1fe::

user: btest
password: btest

If I do not see any abuse , then I will keep the IPv6 address also

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jul 03, 2019 10:39 pm

FYI - update on the btest server(s) for:
IPv4 address: 207.32.194.24
IPv6 address: 2605:4e40:0:1fe::

A few moments ago , I made the following changes to the public accessible btest server:
#1 - Instead of having a single ether1 with both IPv4 and IPv6 addresses , I changed the server so that it is now:
ether1: IPv4 address: 207.32.194.24
ether2: IPv6 address: 2605:4e40:0:1fe::
I did this so that I can get clear graphs for IPv4 traffic and another graph for IPv6 traffic

#2 - I changed the firewall rules (for IPv4 and IPv6) where the wait-time-delay was 15 minutes , the new wait-time-delay is 1 hour.
This is the time a previous btester must wait until they can btest again. I made this test because I see there are some remote users who had scripts that would auto-script a best to my btest server every 15 minutes. This btest server is not intended to be used as a traffic graphing system for other networks. It is intended for Mikrotik admins to be able to manually perform brief btest(s) to verify and test their network reliability and throughput (from time to time - not automatically tested on a pre-configured script schedule).

I would like to ask for some feedback if you don't mind …
--- Who and where-are-you to those who use the btest server ?
--- Does the new IPv6 btest address appear to be working correctly ?
--- And comments are always welcome ……

North Idaho Tom Jones
 
JimRockford
just joined
Posts: 12
Joined: Wed Jul 03, 2019 5:33 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 05, 2019 3:42 am

I would like to ask for some feedback if you don't mind …
--- Who and where-are-you to those who use the btest server ?
--- Does the new IPv6 btest address appear to be working correctly ?
--- And comments are always welcome ……

North Idaho Tom Jones
Hi Tom,

Hope to be near you in Northern Idaho very soon, but for now NE Texas. When I connect to other MikroTiks on our WAN, I get a speedtest back as I would expect, but when I connect to yours, I get a flatline zero. Do I need to change any settings? Thanks for the server.
 
User avatar
macsrwe
Forum Guru
Forum Guru
Posts: 1007
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jul 06, 2019 1:06 am

I would like to ask for some feedback if you don't mind …
--- Who and where-are-you to those who use the btest server ?
I've used it perhaps a dozen times over the past 18 months from the region surrounding Wickenburg, Arizona, to ensure periodically that WAN providers are (still) offering the speeds my clients are paying for. This would be much more difficult to do without the service you offer, so thank you so much.
 
JimRockford
just joined
Posts: 12
Joined: Wed Jul 03, 2019 5:33 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jul 06, 2019 5:15 am

I just don't get it. If I connect to another MikroTik on our WAN, I see a normal throughput graph, but if I connect to this one, it's a 0 flat-line like a patient in asystole. What am I missing?
 
User avatar
macsrwe
Forum Guru
Forum Guru
Posts: 1007
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jul 06, 2019 3:59 pm

I just don't get it. If I connect to another MikroTik on our WAN, I see a normal throughput graph, but if I connect to this one, it's a 0 flat-line like a patient in asystole. What am I missing?
Sorry for what may be an obvious question, but are you connecting to it with the bandwidth test tool, or just connecting to it?
 
JimRockford
just joined
Posts: 12
Joined: Wed Jul 03, 2019 5:33 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jul 06, 2019 7:38 pm

Thanks for the reply, and no apology necessary. I realize you have to ask in these situations. I am connecting under Tools > Bandwidth Test. When I get a connect while attached to the MikroTik via a browser I get a flat line. If I connect to a remote MikroTik across on of our VPN tunnels, I get 35 Mbps which is the upload bandwidth limitation for the remote MikroTik. Last night I found that I could connect to this one via Winbox, but when I did, I got 1200 bps (12kbps). Today if I connect via Winbox I get 0 just like browser based. Again, if I connect to our other MikroTik across the VPN via Winbox I get 35 Mbps.
 
aeroclown
just joined
Posts: 1
Joined: Tue Jul 09, 2019 7:56 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jul 09, 2019 7:59 pm

Is the firmware out of date by chance? I'm running 6.45.1 on a CCR but when I try to do a test to 207.32.194.24 it just sits at the connecting phase. I'm located in Central Texas trying to check the throughput of a new service upgrade on the wan.
 
User avatar
mbfound
Member Candidate
Member Candidate
Posts: 135
Joined: Tue Jul 01, 2014 1:18 pm
Location: South Africa

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jul 16, 2019 3:06 pm

Not working for me now, the other btest server that you linked in your original post works.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jul 16, 2019 7:19 pm

Not working for me now, the other btest server that you linked in your original post works.
If you post your WAN IP address, I can check the btest server and see if there is something stuck in my auto-updating queues and fw auto-timeout rules.

North Idaho Tom Jones
 
User avatar
mbfound
Member Candidate
Member Candidate
Posts: 135
Joined: Tue Jul 01, 2014 1:18 pm
Location: South Africa

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jul 17, 2019 2:41 pm

Probably something in the following range: 129.205. 144.0/24

They are changed around so can't give you a 100% on the last digit.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jul 17, 2019 7:00 pm

There simply just has to be a bug in the Mikrotik ROS !!!
On the public btest server 207.32.194.24 ( also IPv6 2605:4e40:0:1fe:: ) , the btest server settings somehow changed to :
btest server DISABLED (check box not checked)
btest server Authenticate DISABLED (check box not checked)

I re-enabled the two settings and rebooted the btest server

Give it a try and see if the btest server is now working.

((( This simply just has to be a bug in ROS )))
I have two CPUs assigned to my VMware ESXi btest server
I have 1-Gig of RAM assigned to my VMware ESXi btest server
Last time - I made a band-aid fix by disabling Winbox on the server - I will again disable it and see if those two settings again somehow get disabled

North Idaho Tom Jones
 
User avatar
mbfound
Member Candidate
Member Candidate
Posts: 135
Joined: Tue Jul 01, 2014 1:18 pm
Location: South Africa

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Jul 18, 2019 3:01 pm

Still no joy, goes straight to disconnected.

Can traceroute to site although it looks like you have ICMP rate limiter on?
 
matuss
newbie
Posts: 26
Joined: Sun Jul 01, 2018 2:03 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 26, 2019 3:29 pm

Hello, I've just tested to both IPv4 and IPv6 addresses from one of my RB2011 (Slovakia, Central Europe) on ROS 6.45.11 and both worked great, Thank you!

On IPv4 I've got approximately 75/65Mbps and IPv6 was even 95/85Mbps (UDP both way).
Those speeds are good enough for the installation site, but I wonder what would cause such a difference?
Could it be just my provider prioritizing IPv6? Configuration issue on my side? Is it to be expected?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 26, 2019 7:17 pm

Hello, I've just tested to both IPv4 and IPv6 addresses from one of my RB2011 (Slovakia, Central Europe) on ROS 6.45.11 and both worked great, Thank you!

On IPv4 I've got approximately 75/65Mbps and IPv6 was even 95/85Mbps (UDP both way).
Those speeds are good enough for the installation site, but I wonder what would cause such a difference?
Could it be just my provider prioritizing IPv6? Configuration issue on my side? Is it to be expected?
In my opinion …
There are two methods to implement IPv6 routers/networks (with the current IPv4 networks).
- use/build Dual-Stack routers/networks ( were routers in a network are both IPv4 and IPv6 at the same time )
- Add IPv6 routers/networks next to existing IPv4 routers/networks (where you have a mix of only IPv4 routers/networks -and- only IPv6 routers/networks)

Both methods to implement IPv6 work well. ( I'm building both types in my IPS/WISP networks - where some networks use only IPv4 sitting next to only IPv6 routers/network … and other parts of my network are Dual-Stack ( both IPv4 and IPv6 ). There are advantages of both methods to implement IPv6 into your network.
If an IPv4 router is pretty busy/saturated then you have two options , upgrade hardware to support both IPv4 and IPv6 - - - or - - - add additional IPv6 only hardware next to your existing IPv4 hardware. There are pros and cons of both methods.

Edit: Also , IPv6 traffic through the Internet may use different paths (hops) through the Internet verses IPv4 paths (hops). Thus IPv6 traffic has a high possibility of going through totally physically different routers/switches/networks that IPv4 traffic goes through.

In answer to your question - I suspect it simply comes down to what method each Internet hop and built and how busy each device is.

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Aug 08, 2019 6:02 pm

btest server managed by North Idaho Tom Jones
Upgraded from ver 6.45.2 to newer ver 6.45.3 (upgraded a few minutes ago)
 
Tdaddysimi
Member Candidate
Member Candidate
Posts: 108
Joined: Wed Sep 28, 2016 4:37 pm
Location: Minnesota

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Sep 08, 2019 12:59 am

Hey Tom,
I can't connect to 207.32.194.24
Is it up?
 
Tdaddysimi
Member Candidate
Member Candidate
Posts: 108
Joined: Wed Sep 28, 2016 4:37 pm
Location: Minnesota

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Sep 08, 2019 1:01 am

I have a feeling my public got accidentally put on a ban list. I can ping it from a different connection.
Can you please see if 173.27.22.214 got put on a block list?
 
User avatar
mbfound
Member Candidate
Member Candidate
Posts: 135
Joined: Tue Jul 01, 2014 1:18 pm
Location: South Africa

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Sep 09, 2019 4:29 pm

Tom, did you ever get to fixing the speed test server?

Having a similar issue on my CCR and it only works after a reboot for a while.

Says "connecting" "disconnected" whenever I try testing.
 
apetryk
just joined
Posts: 12
Joined: Thu Sep 01, 2011 3:14 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Sep 09, 2019 6:47 pm

Hi,

Are others having issues with tcp based testing? My udp tests are fine but tcp getting zero throughput.

A
 
apetryk
just joined
Posts: 12
Joined: Thu Sep 01, 2011 3:14 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Sep 09, 2019 10:04 pm

FYI - re: TCP testing. I believe this is a config issue for Tom's server as I just tested successfully using TCP using Martooo's public server.
 
User avatar
mrmut
Member Candidate
Member Candidate
Posts: 199
Joined: Mon May 18, 2009 2:10 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Sep 10, 2019 3:31 pm

I confirm issues with BW testing server; TCP test doesn't connect at all, and UDP connects, but doesn't show let anything through.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Sep 13, 2019 6:34 pm

North Idaho Tom Jones - Public btest server

Sorry about not responding to some of the posts here. I've been busy on some ISP/WISP/networking projects.

FYI - I just now ( September 13th 2019 ) updated the btest server from ROS version 6.45.3 to version 6.45.6

I also cleared out some of the btest Address-Lists ( this list auto populates when you perform a btest and is supposed to auto-unpopulated after a time-out period and elapsed )


North Idaho Tom Jones
 
apetryk
just joined
Posts: 12
Joined: Thu Sep 01, 2011 3:14 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Sep 18, 2019 6:45 pm

I can confirm post upgrade the server is working again for both TCP and UDP traffic

A
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Sep 19, 2019 11:08 pm

Just checked 09/19/2019
This Mikrotik forum topic "Public-Mikrotik-Bandwidth-Test-Server(s)" has 408,463 Views

Soooo, do I win a free cup of coffee when it hits 1/2 million views ?

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Re:

Tue Sep 24, 2019 2:51 am

Great idea if You have a good infrastructure and inet line! Thank You!
I was always wondering why MikroTik didn't do that with few bunch of load balanced servers.
I will test it in the evening CET.

Poslano sa mog Mi-4c koristeći Tapatalk
- Sustained traffic is limited to 100 Meg up/down (after about 30 to 60 seconds)
This btest server was not designed or intended for any sustained continuous long-running btest(s). A firewall rule will kick in to prevent saturation of my ISP/WISP bandwidth.

Please only perform brief btest(s) to measure your peak Up/Down traffic.
Normally peak btest measurements can be performed in under 20 seconds.

North Idaho Tom Jones
 
monfi
just joined
Posts: 5
Joined: Thu May 26, 2016 6:00 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Oct 01, 2019 12:16 am

Thank you friend for this resource i wish you the best of luck!, please tell me, still is working! , nowdays!
kindly regards from Ecuador-SouthAmerica
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Oct 01, 2019 5:49 pm

Thank you friend for this resource i wish you the best of luck!, please tell me, still is working! , nowdays!
kindly regards from Ecuador-SouthAmerica
Hello to South America :)

I currently have the btest server off-line.
I am doing some server updates on my network.
It should be back on-line in a couple of hours.

North Idaho Tom Jones
 
User avatar
CZFan
Forum Guru
Forum Guru
Posts: 2098
Joined: Sun Oct 09, 2016 8:25 pm
Location: South Africa, Krugersdorp (Home town of Brad Binder)
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Oct 10, 2019 3:18 pm

...
I would like to ask for some feedback if you don't mind …
--- Who and where-are-you to those who use the btest server ?
--- Does the new IPv6 btest address appear to be working correctly ?
--- And comments are always welcome ……

North Idaho Tom Jones

Hi Tom,
From South Africa, I make use of this service every now and then (once or twice a week), typically when a customer says he is not getting full speed.
Currently only use IPv4 for testing
Thank you
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Oct 11, 2019 1:03 am

...
I would like to ask for some feedback if you don't mind …
--- Who and where-are-you to those who use the btest server ?
--- Does the new IPv6 btest address appear to be working correctly ?
--- And comments are always welcome ……

North Idaho Tom Jones

Hi Tom,
From South Africa, I make use of this service every now and then (once or twice a week), typically when a customer says he is not getting full speed.
Currently only use IPv4 for testing
Thank you
Hello CZFan
That's what my public btest server is for :)
Happy btest-ing :)
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Oct 28, 2019 6:35 pm

Just now updated the public access btest server from "Installed Version 6.45.6" to "Latest Version 6.45.7"

Happy btest (ing)

North Idaho Tom Jones
 
User avatar
danunjaya123
Member Candidate
Member Candidate
Posts: 101
Joined: Thu Oct 03, 2019 7:36 am
Location: India

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Oct 29, 2019 12:59 pm

I have tried to check btest but it was not connecting?


The btest server 207.32.194.24 is now also IPv6 :)
IPv4 address: 207.32.194.24
IPv6 address: 2605:4e40:0:1fe::
user: btest
password: btest
 
Torontobb
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Mon Dec 26, 2016 3:28 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Nov 08, 2019 10:22 pm

Tested, not connecting. Can't find any working public server on this forum.
:shock: :?
 
Torontobb
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Mon Dec 26, 2016 3:28 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Nov 13, 2019 12:21 am

Is this thread and its usefulness fully dead?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Nov 14, 2019 2:12 am

Is this thread and its usefulness fully dead?
This is an active thread.
The btest server is normally running 24 hours a day 7 days a week 365 days a year
The btest server is running right now. I just checked it.

If you are unable to connect to the btest server ..
- wait a few hours
- after waiting , try performing a 30 second btest
- If you are still unable to connect to the btest with the server , then check your firewalls. The btest server only has one firewall configuration which makes recent remote btest-ers have to wait until they can btest again.
--- Are you testing from behind a firewall ?
--- Is your Mikrotik a firewall ?

North Idaho Tom Jones
 
shuguet
just joined
Posts: 5
Joined: Thu Apr 02, 2015 4:05 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Nov 26, 2019 4:56 pm

Hello team,

Any chance there is a 10G btest server out there I could use for a quick bandwidth test?

It would be a one time thing, I have recently upgraded my home fiber connection to a 10G one, just trying to push it all the way to make sure the ISP is really delivering.

Here are the latest test results I achieve with the current btest server mentioned in the first post (Thank you @TomjNorthIdao!).
[mikrotik] > /tool bandwidth-test 207.32.194.24 user=btest password=btest direction=both            
                    ;;; results can be limited by cpu, note that traffic generation/termination 
                        performance might not be representative of forwarding performance
                status: running
              duration: 21s
            tx-current: 584.0Mbps
  tx-10-second-average: 584.2Mbps
      tx-total-average: 574.6Mbps
            rx-current: 1222.9Mbps
  rx-10-second-average: 1224.4Mbps
      rx-total-average: 1243.7Mbps
          lost-packets: 14441
           random-data: no
             direction: both
               tx-size: 1500
               rx-size: 1500
      connection-count: 20
        local-cpu-load: 23%
       remote-cpu-load: 92%
Best regards
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Nov 26, 2019 6:52 pm

Hello team,

Any chance there is a 10G btest server out there I could use for a quick bandwidth test?

It would be a one time thing, I have recently upgraded my home fiber connection to a 10G one, just trying to push it all the way to make sure the ISP is really delivering.

Here are the latest test results I achieve with the current btest server mentioned in the first post (Thank you @TomjNorthIdao!).
[mikrotik] > /tool bandwidth-test 207.32.194.24 user=btest password=btest direction=both            
                    ;;; results can be limited by cpu, note that traffic generation/termination 
                        performance might not be representative of forwarding performance
                status: running
              duration: 21s
            tx-current: 584.0Mbps
  tx-10-second-average: 584.2Mbps
      tx-total-average: 574.6Mbps
            rx-current: 1222.9Mbps
  rx-10-second-average: 1224.4Mbps
      rx-total-average: 1243.7Mbps
          lost-packets: 14441
           random-data: no
             direction: both
               tx-size: 1500
               rx-size: 1500
      connection-count: 20
        local-cpu-load: 23%
       remote-cpu-load: 92%
Best regards
shugnet - I wish I had the ability to briefly drop my bandwidth queues on the 207.32.194.24 public btest server. However , I do not have the extra reserve capacity to offer a btest server at anything beyond what it is already doing because as an ISP, WISP , I am already running near capacity on my Internet connection feeds.
North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Dec 06, 2019 6:29 pm

FYI - I just upgraded the ROS firmware on the public access btest server.
It's now; 6.46

If you encounter any issues with the btest server, please post and let me/us know.

North Idaho Tom Jones

IPv4 address: 207.32.194.24
IPv6 address: 2605:4e40:0:1fe::
user: btest
password: btest
 
User avatar
Thor187
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Sat Oct 21, 2017 10:21 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Dec 12, 2019 5:16 pm

[admin@MikroTik] > /tool bandwidth-test 207.32.194.24 user=btest password=btest direction=both
status: can not connect
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Dec 13, 2019 12:54 am

[admin@MikroTik] > /tool bandwidth-test 207.32.194.24 user=btest password=btest direction=both
status: can not connect
If you are unable to connect to the btest server ..
- wait a few hours
- after waiting , try performing a 30 second btest
- If you are still unable to connect to the btest with the server , then check your firewalls. The btest server only has one firewall configuration which makes recent remote btest-ers have to wait until they can btest again.
--- Are you testing from behind a firewall ?
--- Is your Mikrotik a firewall ?

WIth your IP information, I can look at my logs

North Idaho Tom Jones
 
Tdaddysimi
Member Candidate
Member Candidate
Posts: 108
Joined: Wed Sep 28, 2016 4:37 pm
Location: Minnesota

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 18, 2019 6:15 pm

Ran a btest this morning with my new ccr1036-12g-4s and reached 438 mbps of the 500 i'm paying for. Not bad!!! Thanks!!!
You provide a beautiful service to the Mikrotik community and I appreciate having a resource like this to test against from time to time.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Dec 19, 2019 10:40 pm

Ran a btest this morning with my new ccr1036-12g-4s and reached 438 mbps of the 500 i'm paying for. Not bad!!! Thanks!!!
You provide a beautiful service to the Mikrotik community and I appreciate having a resource like this to test against from time to time.
Tdaddysimi - Thank you for your kind comments

North Idaho Tom Jones
 
apetryk
just joined
Posts: 12
Joined: Thu Sep 01, 2011 3:14 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 31, 2019 5:02 pm

Is the bandwidth test server down? The last successful test I ran from two different routers on three different WAN connections was Dec 28.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jan 03, 2020 11:42 pm

Is the bandwidth test server down? The last successful test I ran from two different routers on three different WAN connections was Dec 28.
can you ping the btest server ?
 
Acerorosso
just joined
Posts: 1
Joined: Sat Jan 04, 2020 7:43 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jan 04, 2020 7:50 am

Hi all, I tried this morning a speed test but the router seem to be unable to connect ... "Connecting" is the last step i see in the process.

I'm running last Firmware 06.46.1 and Router Model :SXT R

There's some issue with server or is my side not properly working ?
Test server 207.32.194.24 is pingable but no connection from Mikrotik router test utility.

Thank you for some ideas,
Marco
 
apetryk
just joined
Posts: 12
Joined: Thu Sep 01, 2011 3:14 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jan 04, 2020 4:19 pm

Is the bandwidth test server down? The last successful test I ran from two different routers on three different WAN connections was Dec 28.
can you ping the btest server ?
Tom,

I could ping the btest server when it wasn't able to connect for the bandwidth test.

Not sure if you changed something but this morning was the first time since Dec 28 where I'm now able to successfully run bandwidth tests again.

Adam
 
apetryk
just joined
Posts: 12
Joined: Thu Sep 01, 2011 3:14 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Feb 03, 2020 3:19 pm

207.32.194.24 test server may be down.

It doesn't respond to ping. Traceroute shows the last reachable hop as 207.32.194.6
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 04, 2020 6:10 pm

Hmmm , this morning I had to reboot the btest server.

For some reason, the btest settings got un-checked ( login and service ).
I've seen this CHR based btest server do this a few times last year.


While I was at it, I upgraded from 6.46.1 to 6.46.2
Anyways, it should be running now.

North Idaho Tom Jones
 
supercap
just joined
Posts: 2
Joined: Wed Feb 12, 2020 11:15 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Feb 12, 2020 11:19 pm

Hi,
today your server not work: no ping and traceroute stop at 207.32.194.6.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Feb 13, 2020 8:31 pm

The IPv4 address of my btest server is 207.32.194.24

FYI , This morning , I upgraded this CHR btest server from 6.46.2 to 6.46.3

North Idaho Tom Jones
 
supercap
just joined
Posts: 2
Joined: Wed Feb 12, 2020 11:15 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Feb 14, 2020 2:50 pm

Yes i tried right now and worked for two times: both direction and send direction.
Third time i tried with a send direction, was not work.
Now i wait a bit and i try again.
 
zakynthoswifi
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jul 17, 2014 12:38 am
Location: Zakynthos
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Feb 29, 2020 3:22 pm

Hello,
I can't connect to your btest server...
it says connecting and after 12 seconds disconnected...
 
dadoremix
Member Candidate
Member Candidate
Posts: 133
Joined: Sat May 14, 2011 11:31 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Feb 29, 2020 3:24 pm

yep
207.32.194.24 down
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Mar 03, 2020 6:49 pm

Tuesday March 3rd 2020 at 8:50 AM PST , I updated the chr btest server from Version 6.46.3 to Version 6.46.4

North Idaho Tom Jones
 
ercxar
just joined
Posts: 3
Joined: Sat Jun 07, 2014 11:24 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Mar 09, 2020 3:48 am

Have you blocked any countries? (Iran)
Tried to connect to 207.32.194.24 but it says can't connect. Tried to ping and it returns timeouts ...

EDIT: It gets stuck at connecting for a while and then gives the can't connect error.
 
Sanz7
just joined
Posts: 1
Joined: Mon Mar 16, 2020 9:39 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Mar 16, 2020 9:52 am

i want to test my 10Gb Traffic, can anyone help to provide btest server for 10Gb Traffic? need soon
 
Garrison1701
just joined
Posts: 9
Joined: Tue Jun 19, 2018 5:10 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Mar 25, 2020 1:04 am

Hello everyone,

I recently ordered a 10 Gbps upgrade for my WISP's primary internet circuit, but I don't believe that I am receiving the full 10 Gbps. Is there anyone with a 10 Gbps btest server who could help me out? I can provide my public IP for my btest server through other means if someone wants to swap test server information.
 
Garrison1701
just joined
Posts: 9
Joined: Tue Jun 19, 2018 5:10 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Mar 25, 2020 1:44 am

Excuse the double post, but after reading through this entire thread and employing some of the scripts that have already been posted. I feel relatively safe putting this out here. Please don't make me regret it.

IP: 38.104.52.187
Username: btest
Password: btest

Please let me know if you guys are able to achieve 10 Gbps symmetrical connections
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Mar 25, 2020 2:09 am

Excuse the double post, but after reading through this entire thread and employing some of the scripts that have already been posted. I feel relatively safe putting this out here. Please don't make me regret it.

IP: 38.104.52.187
Username: btest
Password: btest

Please let me know if you guys are able to achieve 10 Gbps symmetrical connections
Reply from Tom Jones

Hello Garrison1701, I am the owner/operator of the original btest server IPv4 address: 207.32.194.24 & IPv6 address: 2605:4e40:0:1fe::
I just wanted to step in and welcome and it's nice to see another public access btest server on-line.
If you experience any issues or problems, you are welcome to contact me for how I might of delt with the same problem.

North Idaho Tom Jones
 
Garrison1701
just joined
Posts: 9
Joined: Tue Jun 19, 2018 5:10 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Mar 25, 2020 2:22 am

Thanks, Tom. I actually just set up a queue for burst at 4 Gbps with sustained speeds at 1 Gbps. Figured it might be bad if it maxed my connection briefly.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Mar 26, 2020 3:52 am

Heads up, I had to temporarily power-off the public access btest server I manage.

Here in the U.S. , there are thousands of business every where that have laid-off workers , and many of those workers are now working from home. Additionally, Netflix (and other on-line movie video sources) are getting increased bandwidth usage. In some locations, the Internet is experiencing much greater than normal bandwidth and some ISPs are experiencing problems. To help my ISP/WISP operations, I have temporarily disabled the btest server so that I can divert the normal ( peaking up to 2-Gig btest traffic) bandwidth to my customers.

I promise to return the btest server back on-line just as soon as my network stabilizes and the bandwidth is once again available.
This is the first time in over 4-years I have taken this btest server off-line for anything other than basic maintenance.

Everybody , be safe and take proper precautions to protect your ISP/WISP, business, customer and employees. And consider preparing your network(s) for a possible network increase of anywhere from 5 percent to 75 percent. So far, I am only at an additional 5 percent but I am getting ready for an additional 50 percent increase very soon to hit our networks.

North Idaho Tom Jones
 
User avatar
Tonete
just joined
Posts: 5
Joined: Wed Oct 03, 2018 10:46 am
Location: Granada - SPAIN

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Mar 26, 2020 1:12 pm

Hello everyone,
Do you know what's happenning with NETERRA bandwidth server?.
It seems that is down, almost since february.

Thanks!
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Mar 26, 2020 5:57 pm

Hello everyone,
Do you know what's happenning with NETERRA bandwidth server?.
It seems that is down, almost since february.

Thanks!
What is a NETERRA bandwidth server?
 
User avatar
Tonete
just joined
Posts: 5
Joined: Wed Oct 03, 2018 10:46 am
Location: Granada - SPAIN

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Mar 29, 2020 2:55 pm

Sorry!
I'd refer to the server at:

IP: 87.121.0.45
U: neterra
P: neterra
Last time I have seen was on february 25th.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Apr 16, 2020 3:51 am

A few minutes ago, I brought my public access btest server back on-line.
It is now running again - however , I reduced the maximum btest throughput (using multiple Simple-Queues) to 100 Meg.

Normally this btest server has has the ability to btest at greater than Gig Internet best speeds.
Because of the Corona virus pandemic and most of my customers now working from home and schooling from home, my ISP Internet bandwidth has jumped an additional 25 percent and sometimes peaks at an additional 150+ percent higher than my normal Internet traffic.

You are again welcome to use my btest server again. I ask that you please please please only perform short btest(s) to my server (because my Internet feeds are currently operating at much greater loads than normal.

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Apr 16, 2020 3:57 am

Wow I just noticed ---> 496,719 Views as of April 15'th 2020

Won't be long till this "Public-Mikrotik-Bandwidth-Test-Server(s)" hits 1/2 million views !!!

North Idaho Tom Jones
 
kd2pm2
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Wed Nov 14, 2012 7:14 am
Location: New Jersey, USA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Apr 16, 2020 4:53 am

Wow I just noticed ---> 496,719 Views as of April 15'th 2020

Won't be long till this "Public-Mikrotik-Bandwidth-Test-Server(s)" hits 1/2 million views !!!

North Idaho Tom Jones
Thanks for hosting the server! Just did a test in NJ on Comcast...actually getting more than advertised. I have 300 D/L and seeing 370..I'll take it.! 10 U/L but showing 12...nice...

Moving from DOCSIS 3.0 this weekend to 3.1 so will see if that has any impact at all. I dont expect it to but it will let me know if the newer Netgear is better or worse than my existing Netgear modem
 
Medro
just joined
Posts: 1
Joined: Mon Apr 20, 2020 4:36 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Apr 20, 2020 4:40 pm

Wow I just noticed ---> 496,719 Views as of April 15'th 2020

Won't be long till this "Public-Mikrotik-Bandwidth-Test-Server(s)" hits 1/2 million views !!!

North Idaho Tom Jones
:shock: That's a lot, I guess people have not much to do these days due to the virus. So everybody is in front of the computer including me writing you from my Greece property here
 
AnAnAs
newbie
Posts: 25
Joined: Fri Apr 13, 2018 11:08 pm
Location: France

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Apr 22, 2020 4:44 pm

Hi All,

It works very well,
Perfect
2.PNG
You do not have the required permissions to view the files attached to this post.
 
ercxar
just joined
Posts: 3
Joined: Sat Jun 07, 2014 11:24 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Apr 23, 2020 6:28 am

A few minutes ago, I brought my public access btest server back on-line.
It is now running again - however , I reduced the maximum btest throughput (using multiple Simple-Queues) to 100 Meg.

Normally this btest server has has the ability to btest at greater than Gig Internet best speeds.
Because of the Corona virus pandemic and most of my customers now working from home and schooling from home, my ISP Internet bandwidth has jumped an additional 25 percent and sometimes peaks at an additional 150+ percent higher than my normal Internet traffic.

You are again welcome to use my btest server again. I ask that you please please please only perform short btest(s) to my server (because my Internet feeds are currently operating at much greater loads than normal.

North Idaho Tom Jones
Hello

Unfortunately 207.32.194.24 is unreachable. The traceroute stops at 207.32.194.6.
 
danriis
just joined
Posts: 17
Joined: Wed May 29, 2019 1:52 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Apr 30, 2020 5:07 am

Hi there, I don't seem to be able to use the bandwidth test server, is there a new IP or new login credentials?
Thank you in advance,
Dan
 
User avatar
mac86
Member Candidate
Member Candidate
Posts: 124
Joined: Sat Nov 25, 2006 12:52 am
Location: bahia blanca - argentina
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri May 01, 2020 1:44 am

seems like 207.32.194.24 doesn't work anymore :(
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri May 01, 2020 7:09 pm

seems like 207.32.194.24 doesn't work anymore :(
I just rebooted the btest server.
From time to time, the Mikrotik btest server ( on CHR ) will just quit working and the btest service will stop and show un-checked

North Idaho Tom Jones
 
shylow
just joined
Posts: 2
Joined: Sun Jan 25, 2015 10:52 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun May 24, 2020 3:08 pm

Here's a tip for those wanting to test bandwidth. Especially if under 1Gbps.

I used my Azure account to create a Windows 10 Pro virtual machine in a region near me with a 1Gbps link.

RDPed into it, disabled the firewall for ease, and downloaded the Mikrotik btest.exe program (https://mt.lv/btest)

Using this, I was able to successfully test the capabilities of my link for as long as I needed, when I needed.

This doesn't take long to setup, and if destroyed afterwards only cost pennies.
 
Toto87
just joined
Posts: 7
Joined: Wed May 20, 2020 11:33 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue May 26, 2020 11:22 am

Hi ,

how i can access to this server .. i tried winbox and telnet but nothing .. Any way ,, Thanks in advance

Kind Regards
Tariq.E
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue May 26, 2020 1:10 pm

Use Bandwidth Test client to access it.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Jun 08, 2020 10:14 pm

FYI
I just now updated the 207.32.194.24 btest server
From: 6.46.5
To: 6.47

North Idaho Tom Jones
 
kd2pm2
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Wed Nov 14, 2012 7:14 am
Location: New Jersey, USA

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jun 10, 2020 2:12 am

Just tried it. I can get data when I transmit but I see no stats when I try to do a receive test.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jun 12, 2020 9:20 pm

Just tried it. I can get data when I transmit but I see no stats when I try to do a receive test.
Question - Is your Mikrotik behind a firewall ( natted ) and/or is your Mikrotik possibly firewalling inbound connections ( such as btest receive ) ?
Try putting a Mikrotik on a live IP address with no firewall then try running the btest.

North Idaho Tom Jones
 
belefor
just joined
Posts: 8
Joined: Fri Jun 01, 2007 10:15 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Jun 25, 2020 3:37 pm

Hi Tom,
Just tested my 100/100 Mb/s fiber connection .
I was getting 99.5Mb/s constantly both ways.
Greetings from South Africa
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Jun 25, 2020 9:38 pm

Hi Tom,
Just tested my 100/100 Mb/s fiber connection .
I was getting 99.5Mb/s constantly both ways.
Greetings from South Africa
Thank you for your post.
:)
 
daggerCVN
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Thu Jan 30, 2014 5:05 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jun 30, 2020 9:11 pm

Tom/Garrison/all - thank you for your public btest servers and support.

Tom - if I may repeat a question that has been asked multiple times - do I need to be running the same firmware version or main code branch, or is there a minimum firmware? My router is running 6.44.x Must it be on 6.47.x?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Jun 30, 2020 9:35 pm

Tom/Garrison/all - thank you for your public btest servers and support.

Tom - if I may repeat a question that has been asked multiple times - do I need to be running the same firmware version or main code branch, or is there a minimum firmware? My router is running 6.44.x Must it be on 6.47.x?
I don't know the rule for different versions. I do know that I have experienced btest not working until I would upgrade everything to the latest versions.
 
AlexRodac
just joined
Posts: 23
Joined: Tue Jun 30, 2020 6:37 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jul 01, 2020 7:20 pm

Hello, I want to know, how to configure the GPS in my LtAP LTE mikrotik devices and if I have to activate the other slots to implement more SIM cards?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jul 15, 2020 10:43 pm

FYI - July 15th 2020

I just now updated the btest server ( IPv4 207.32.194.24 IPv6 2605:4e40:0:1fe:: ) server from 6.47 to 6.47.1

Happpy btest-ing ...


North Idaho Tom Jones
 
creatin
Member Candidate
Member Candidate
Posts: 108
Joined: Sat Nov 23, 2019 2:59 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 17, 2020 2:57 am

Thanks and greetings from Croatia
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 17, 2020 3:02 am

Thanks and greetings from Croatia
Greetings back to you from North Idaho :)
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 17, 2020 4:15 am

FYI re the btest server I operate.

I've got a full 10-Gig Internet on order. In about 3 weeks ( give or take ), I will be able to turn up the btest server back to 3-Gig or faster speeds for remote btest throughput testing.

I was forced to seriously decrease the maximum btest speeds to only a few hundred megs a few weeks ago. With the Covid-19 Corona virus here in my service area, my ISP/WISP bandwidth took an instant 300+ percent increase in bandwidth because everybody started working from home ( including the school students ) - which nearly saturated my current available Internet bandwidth.

I can't wait to test a full 10-Gig connection with only one device on the new network and go to www.speedtest.net ( I hope the speed indicator dial says " You are crazy fast !" )

North Idaho Tom Jones
 
smuslim
just joined
Posts: 6
Joined: Tue Feb 26, 2019 12:25 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 17, 2020 4:26 am

Hi guys. Anyone knows 1 gbit server for bandwidth test?
p.s on 207.32.194.24 can only get 92-95mps
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 17, 2020 4:33 am

Hi guys. Anyone knows 1 gbit server for bandwidth test?
p.s on 207.32.194.24 can only get 92-95mps
FYI - my post prior to your post is about the 207.32.194.24 btest server. But that is possible a couple of week out still.

North Idaho Tom Jones
 
smuslim
just joined
Posts: 6
Joined: Tue Feb 26, 2019 12:25 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 17, 2020 4:42 am

Hi guys. Anyone knows 1 gbit server for bandwidth test?
p.s on 207.32.194.24 can only get 92-95mps
FYI - my post prior to your post is about the 207.32.194.24 btest server. But that is possible a couple of week out still.

North Idaho Tom Jones
Thanks for response and making the server public!
 
AlexRodac
just joined
Posts: 23
Joined: Tue Jun 30, 2020 6:37 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jul 17, 2020 6:34 pm

Hello, I want to know how to configure all the sim card slots of my LtAP LTE device kit, it has three sim card slots.
I only have active a one slot, that it is the second slot.
It doesn't let me activate the other two slots, it tells me that "only APN can be local!" And I do not understand because.
 
User avatar
mac86
Member Candidate
Member Candidate
Posts: 124
Joined: Sat Nov 25, 2006 12:52 am
Location: bahia blanca - argentina
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Aug 11, 2020 5:01 pm

Ctr+X - Moderator
This is SPAM.

please, don't send us spam
This is a Mikrotik Forum.

thank you.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 2855
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Aug 11, 2020 5:14 pm

do not respam spam
 
awesomefishguy
just joined
Posts: 22
Joined: Wed Nov 27, 2013 3:01 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Aug 25, 2020 11:14 pm

I have a 5GB pipe. Happy to offer some free bandwidth.
 
User avatar
Mannsean
just joined
Posts: 6
Joined: Thu Aug 13, 2020 3:32 pm
Location: England London

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Aug 28, 2020 1:53 am

I have a 5GB pipe. Happy to offer some free bandwidth.
You so awesome
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Sep 22, 2020 4:02 am

Some news , I have my IPv4: 207.32.194.24 IPv6: 2605:4e40:0:1fe:: back on-line again.
EDIT: btest user is --> btest and btest password is --> btest ( btest & btest )
I set the queue to allow btest-ing up to 4-Gig.

Question - Who has a 10-Gig Internet connected Mikrotik I can perform a btest to/from ?
I am now on a 10-Gig connection and I am looking for something to btest to/from so that I can check my 10-Gig connection.

Also - If you are btest-ing to my btest server - Please post your btest speed results , I want to verify It is running up to and over 2 Gig and possibly hitting 4-Gig on the top-end of btest throughput results.

North Idaho Tom Jones
 
gotsprings
Forum Guru
Forum Guru
Posts: 2087
Joined: Mon May 14, 2012 9:30 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Sep 23, 2020 3:35 pm

Some news , I have my IPv4: 207.32.194.24 IPv6: 2605:4e40:0:1fe:: back on-line again.
EDIT: btest user is --> btest and btest password is --> btest ( btest & btest )
I set the queue to allow btest-ing up to 4-Gig.

Question - Who has a 10-Gig Internet connected Mikrotik I can perform a btest to/from ?
I am now on a 10-Gig connection and I am looking for something to btest to/from so that I can check my 10-Gig connection.

Also - If you are btest-ing to my btest server - Please post your btest speed results , I want to verify It is running up to and over 2 Gig and possibly hitting 4-Gig on the top-end of btest throughput results.

North Idaho Tom Jones
"can't connect"
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Sep 23, 2020 6:02 pm

Reply to gotsprings re "can't connect"

Question: What is your IP address ? I will look at my access-lists.
Question: Has this ever worked for you in the past ?
Question: Can you ping 207.32.194.22 ?
Question: I want to verify --> Are you trying to Bandwidth-Test to my Mikrotik BTest-Server IPv4 address of 207.32.194.24 using User: btest Password: btest ?
Question: Is the Mikrotik you are trying to Bandwidth-Test from directly on the Internet and no firewall ? Firewalls can prevent some UDP and/or TCP send and/or receive btest from running.

North Idaho Tom Jones
 
aslev
just joined
Posts: 1
Joined: Fri Sep 25, 2020 9:53 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Sep 25, 2020 10:19 pm

Hi,
Found my way here from Google.
I have 10Gbps located in Stockholm, Sweden. Using CCR1036-8G-2S+.

Tested on: 38.104.52.187
10sec average: 2.9 Gbps/74.2 Mbps

And also: 207.32.194.24
I achieved 4Gbps both send and receive, however I did not run both at the same time.
Now I can't connect, but I guess (without reading trough every post here) that you have some sort of spam/flood protection that puts me on hold?

I don't have any devices yet that can handle 10Gbps (they are on the way) and I would LOVE to try this beast out on it's full capacity from the router itself.
I could also set up a BTest Server if anyone would like to try against my connection. However, this is a private resident with static IP and I don't want to post my IP here. Private message, if that is possible on this forum would be preferred.

Also a big thanks to everyone here for publishing test servers.
Especially you TomjNorthIdaho.
Br
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Sep 29, 2020 6:03 pm

re: Now I can't connect, but I guess (without reading trough every post here) that you have some sort of spam/flood protection that puts me on hold?

Yes , I do have a Simple-Queue which also uses an Address-List.
My address list has the following types of Names ( types ).
- blocklist - IP address that are blocked from using my btest server ( bad guys who have abused my btest server )
- previous - IP address that have recently used my btest server and are blocked for a couple of hours , then auto released
- tester - IP addresses that are white-listed ( IP address that have unlimited access to my btest server - these are normally my networks that I manage ).

Also - my Simple-Queue limits the maximum speed of all running btest testing to 4-Gig ( all currently running btests at the same time in the 4-Gig rate-limiting queue ). This is to prevent my Internet connection from getting hammered.

I will be building a second private full 10-Gig btest server. If you are interested in performing a full 10-Gig btest , I am open to the idea.

North Idaho Tom Jones
 
roxanaschram
just joined
Posts: 10
Joined: Sat Oct 10, 2020 7:59 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Oct 10, 2020 8:34 am

Just installed a CCR1009 on a 1GB fiber connection. Wondering why i get must slower speed test results behind the CCR than just plugged into the fiber modem. Fast.com direct is 900mbps+ and behind the CCR is closer to 550. Ran the bandwidth test built into the router and Mikrotik app for Windows. Got different results there too.

Edit: Figured out that I forgot to enable fasttrack. Now I get full speed to this server when its not bogged down.
 
skillbie
just joined
Posts: 4
Joined: Mon May 14, 2018 5:01 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Nov 30, 2020 5:27 pm

Hallo!
Someone have a free bandwidth test that works?
Thanks!
 
roxanaschram
just joined
Posts: 10
Joined: Sat Oct 10, 2020 7:59 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 01, 2020 9:35 am

Hallo!
Someone have a free bandwidth test that works?
Thanks!
IP: 38.104.52.187
User: btest
Pass: btest

This one seems to always work. Just tested it and got 1gb/s both ways which is my max possible.
 
skillbie
just joined
Posts: 4
Joined: Mon May 14, 2018 5:01 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 01, 2020 3:21 pm


IP: 38.104.52.187
User: btest
Pass: btest
This one seems to always work. Just tested it and got 1gb/s both ways which is my max possible.
Thank you! It works, but from Italy 400/400 effective works only until 200/250.... Perhaps I'm so far...
 
User avatar
Joni
Member Candidate
Member Candidate
Posts: 156
Joined: Fri Mar 20, 2015 2:46 pm
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 01, 2020 4:29 pm

And while we are testing bandwidth... we might want a refresher on the affects of latency and loss...
Namely where your public test server is located, globally...

https://accedian.com/blog/measuring-net ... cket-loss/
http://bradhedlund.com/2008/12/19/how-t ... nce-links/
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 08, 2020 8:19 pm

December 8th 2020
Notice; The public access btest server I manage was re-numbered into new/different IP addresses. This public btest server is now at the following IP addresses:

IPv4: 23.162.144.120
IPv6: 2605:6340:0:1b::4

btest username: btest
btest password: btest

Note; To use this Mikrotik public access btest server , you agree to the following terms and conditions:
#1 - You will not use or create any automatic btest scripts on a timed schedule to automatically perform btest(s) to this btest server.
#2 - You will not run extended btest(s) to this btest server which last longer than 30 seconds.
#3 - The use of this btest server is only permitted to perform brief 30-second btest(s).
#4 - You will never use this btest server to create a degrading bandwidth sustained load on your up-stream Internet provider.
#5 - You agree that I ( the owner/operator ) of this btest server may post your remote btest IP address(s) you used to test to my btest server.
#6 - All btest(s) you perform to this btest server will always be performed using a hands-on procedure without the use of any automated scripts.
#7 - You will never attempt a "dude" connection to this btest server.
#8 - You may perform up to 4 ( four ) btest(s) in a 24-hour period
#9 - You will pause a minimum of 5-minutes between btest(s)
#10 - Failure to follow the above listed requirements may result in actions on my part to permanently ban/block your IP addresses from my networks and this btest server.
#11 - I ask ( not required ) , that you post in this Mikrotik forum what country/city your are located in and your btest throughput results.
#12 - You understand these terms and conditions and you understand the purpose of this btest server is to assist all Mikrotik admins in determining the status/throughput capabilities of the networks they manage.
**** This btest server has the capabilities to perform brief btest(s) up to 4-Gig throughput

North Idaho Tom Jones
 
jweek
just joined
Posts: 6
Joined: Tue Dec 24, 2019 2:37 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 08, 2020 10:59 pm

TomjNorthIdaho,

Thanks for providing this I live in Reno, NV and have AT&T Gig residential fiber. Bypassing using a rb4011igs+rm
btest.JPG
You do not have the required permissions to view the files attached to this post.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 09, 2020 1:26 am

jweek - Gig to the home - nice :)
 
jagman2020
just joined
Posts: 1
Joined: Thu Jul 04, 2019 9:03 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 09, 2020 4:18 am

Hi,
Canberra Australia..
Trying to run a speed test against this but it never seems to connect?
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 14, 2020 3:28 pm

Notice; The public access btest server I manage was re-numbered into new/different IP addresses. This public btest server is now at the following IP addresses:
Maybe some FQDN can help in long-term? :) Not the IP Cloud one (it's hard to remember), but custom one would be nice.
 
DarkNate
Forum Veteran
Forum Veteran
Posts: 997
Joined: Fri Jun 26, 2020 4:37 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 14, 2020 5:08 pm

@TomjNorthIdaho was testing multi-threaded (30+), you may have seen requests for up to 200 threads (tested the same with public iPerf3 servers to detect if my ISP throttles per thread, which they do), in case your setup/logs thought it was an attacker, + have two ISPs (testing it out).

My ISP's ASN:9829, should be enough for you to figure out which IPs were coming from me.

If you're interested DM me, we can run more thorough tests with multi-threads exceeding the usual 8-20 limit as I have two ISPs (I use 24 threads on client devices and I'm able to pull aggregated bandwidth of both ISPs on the daily).
 
andrewkurilko
just joined
Posts: 1
Joined: Tue Dec 15, 2020 12:58 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 15, 2020 1:10 pm

@TomjNorthIdaho Thank you for your test server for the Mikrotik Bandwith test.
My test results from Ukraine Kiev ISP Lanet.
Image Image
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 16, 2020 4:35 am

Notice; The public access btest server I manage was re-numbered into new/different IP addresses. This public btest server is now at the following IP addresses:
Maybe some FQDN can help in long-term? :) Not the IP Cloud one (it's hard to remember), but custom one would be nice.
Re ... Maybe some FQDN can help in long-term? ...
One minor reason I don't use DNS to point to the btest server is that if I renumber ( because of attack or some other renumber reason ) , it won't have the script bots performing automatic btest following me. The script bots are the worst - automatic btest the moment my times-access-list times out , every hour every day every month every year. Yes I can configure firewalls and stuff but I also have a ISP/WISP I am busy running.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Dec 24, 2020 12:11 am

Heads up ...
I just updated the btest server from Version 6.47.8 to Version 6.8


IPv4: 23.162.144.120
IPv6: 2605:6340:0:1b::4

btest username: btest
btest password: btest


North Idaho Tom Jones
 
netbus
Frequent Visitor
Frequent Visitor
Posts: 60
Joined: Mon Sep 04, 2017 12:42 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Dec 27, 2020 12:09 pm

Heads up ...
I just updated the btest server from Version 6.47.8 to Version 6.8


IPv4: 23.162.144.120
IPv6: 2605:6340:0:1b::4

btest username: btest
btest password: btest


North Idaho Tom Jones
Doesn't work. Neither v4 nor v6 🙄
 
Tirdo
just joined
Posts: 1
Joined: Mon Dec 28, 2020 2:42 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 28, 2020 2:48 am

Good day.. how can I know if I already ip block? I try best 2 times with less than 5mins only..
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 28, 2020 6:21 pm

Heads up ...
I just updated the btest server from Version 6.47.8 to Version 6.8


IPv4: 23.162.144.120
IPv6: 2605:6340:0:1b::4

btest username: btest
btest password: btest


North Idaho Tom Jones
Doesn't work. Neither v4 nor v6 🙄
Is it working now ? Are you behind a firewall ? Is your Mikrotik running a firewall ? It appears to be working for others.
 
netbus
Frequent Visitor
Frequent Visitor
Posts: 60
Joined: Mon Sep 04, 2017 12:42 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 28, 2020 7:26 pm

it was working partially for some minutes. now it's again not working.
my router is directly connected to the Internet. Firewall is running but no output filter.
Perhaps you can see some hints in the log? My IP Starts with 185.
Last edited by netbus on Mon Dec 28, 2020 7:52 pm, edited 1 time in total.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 28, 2020 7:38 pm

it was working partially for some minutes. now it's again not working.
my router is directly connected to the Internet. Firewall is running but no output filter.
Perhaps you can see some hints in the log? My IP Starts with 185. (AS51184)
Re; ... it was working partially for some minutes. now it's again not working ...
Have you read my posts about wait periods between tests and continuous testing ?

I have a firewall setting on the btest server which forces the remote btester to do the following:
- Wait between btests
- Prevents continuous and/or consecutive btests

With that said - I just now removed your 185.x.x.x IP address from the must-wait list. It will again auto populate after you run a btest which will again require another wait period.

North Idaho Tom Jones
 
netbus
Frequent Visitor
Frequent Visitor
Posts: 60
Joined: Mon Sep 04, 2017 12:42 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 28, 2020 7:48 pm

4 x 30 seconds tests with 5 minutes pause in between and waiting 24 hours for the next attempt is ridiculous 🤦‍♂️
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Dec 28, 2020 8:13 pm

4 x 30 seconds tests with 5 minutes pause in between and waiting 24 hours for the next attempt is ridiculous 🤦‍♂️
ridiculous ?

What do you expect for free ?

You are welcome to create your own public btest server , allocate some of your extra gigabits of Internet bandwidth to it and show everybody how you can do it better.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 29, 2020 1:50 am

Heads-up
The btest server I manage is off-line ( possibly until tomorrow - depending ).

I am performing some year-end 2020 backups of my ISP/WISP system. When I get finished , I will turn it back on.

North Idaho Tom Jones

** Wow - next month , it will be 5 years and a little over 6-hundred-thousand forum views and countless terabytes this server has been available **
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Dec 29, 2020 7:01 pm

Heads-up
The btest server I manage is off-line ( possibly until tomorrow - depending ).

I am performing some year-end 2020 backups of my ISP/WISP system. When I get finished , I will turn it back on.

North Idaho Tom Jones

** Wow - next month , it will be 5 years and a little over 6-hundred-thousand forum views and countless terabytes this server has been available **
Good morning ... The btest server is back on-line. 30-seconds after it was back on-line , I had a remote btest running on it at 100-meg down then 20-meg up :)
 
InTheSprawl
just joined
Posts: 5
Joined: Tue Nov 08, 2016 6:41 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Dec 30, 2020 9:06 am

Thanks Tom!

Los Angeles
543.5 Mbps / 268.5 Mbps
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Dec 31, 2020 10:03 pm

for me where I live here in North Idaho - it's 12/31/2020 noon.

I want to wish all Mikrotik admins a Happy New Year
now don't get tooooo drunk tonight because you might have to fix your network at midnight :) lol


may your btest(s) be through the roof in 2021

North Idaho Tom Jones
 
Yanncd
just joined
Posts: 6
Joined: Thu Mar 12, 2020 11:35 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jan 01, 2021 7:11 pm

Hello,
Cannot connect...
Happy new year anyway...
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Jan 04, 2021 7:52 pm

Hello,
Cannot connect...
Happy new year anyway...
Yanncd - your post "... Cannot connect... "

- Is your Mikrotik behind a firewall ?
- Does your Mikrotik have a live outside IP address ( not natted ) ?
- Is your Mikrotik also a firewall ?
- Can you ping IPv4: 23.162.144.120 and/or IPv6: 2605:6340:0:1b::4 ?
- Have you tried TCP send ?
- Did you read through all related btest posts in this forum ?
- Is the ROS software version of your Mikrotik the latest up-do-date version ?

Normally , if you are getting a "can't connect" , then the problem is likely a firewall on your side.

North Idaho Tom Jones
 
vuli
just joined
Posts: 9
Joined: Sat Dec 26, 2020 6:38 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Jan 07, 2021 9:31 pm

i tried few times(~5) and I think i am blocked(213.250.22.). Well, tested TCP was fine, on UdP TX was ok, RX was terible (1Mb) instead ~20Mb
Image
Image

on this one looks a liitle better, maybe I was missing udp rule in FW
Image
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jan 08, 2021 4:00 am

vuli - were are you testing from ( what country ) ?
What is your Internet speed supposed to be ?

North Idaho Tom Jones
 
bmurillo
just joined
Posts: 1
Joined: Fri Jan 08, 2021 9:35 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jan 08, 2021 9:47 am

Hi Tom,

I wanted to thank you and at the same time say sorry. I didn't read all the rules and might have been running a couple of tests more than what you asked for (and/or more often than pointed out).

Anyway, Im done with my tests and I got the results I expected, THANKS A LOT for this service !!!

Im running this from Sarchi, Costa Rica (my ip ends with .163.144) and my speed is supposed to be 100/12 Mbps
Screenshot from 2021-01-08 01-40-40.png

Thanks Again,
Bernal Murillo

PS: I might be blocked, and I'd really appreciate if you could unblock me, I promise I read all the instructions now and I'll follow them
You do not have the required permissions to view the files attached to this post.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Jan 08, 2021 5:52 pm

Hi Tom,

I wanted to thank you and at the same time say sorry. I didn't read all the rules and might have been running a couple of tests more than what you asked for (and/or more often than pointed out).

Anyway, Im done with my tests and I got the results I expected, THANKS A LOT for this service !!!

Im running this from Sarchi, Costa Rica (my ip ends with .163.144) and my speed is supposed to be 100/12 Mbps
Screenshot from 2021-01-08 01-40-40.png


Thanks Again,
Bernal Murillo

PS: I might be blocked, and I'd really appreciate if you could unblock me, I promise I read all the instructions now and I'll follow them
bmurillo
By the time I checked to see if the IP address was blocked in the btest server , it had already timed-out and was auto removed. You are good to go for another test.

North Idaho Tom Jones
 
rianda08
just joined
Posts: 3
Joined: Sat Jan 23, 2021 10:27 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jan 23, 2021 10:44 am

thanks a lot tom, this is what i realy need.. hope this last long :D
really helpfull
You do not have the required permissions to view the files attached to this post.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jan 27, 2021 2:53 am

thanks a lot tom, this is what i realy need.. hope this last long :D
really helpfull
rianda08
Looks like you have a Gig TCP up test
Impressive btest results :)

North Idaho Tom Jones
 
billjellis
Frequent Visitor
Frequent Visitor
Posts: 53
Joined: Mon Dec 15, 2014 11:04 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jan 27, 2021 6:31 pm

Hi All,

tool speed-test 23.162.144.120 user=btest password=btest
status: udp upload
time-remaining: 3s
ping-min-avg-max: 22.5ms / 29.4ms / 40.7ms
jitter-min-avg-max: 30us / 3.01ms / 13.3ms
loss: 0% (0/200)
tcp-download: 672Mbps local-cpu-load:22%
tcp-upload: 20.9Mbps local-cpu-load:1% remote-cpu-load:6%
udp-download: 843Mbps local-cpu-load:6% remote-cpu-load:39%
udp-upload: 21.6Mbps local-cpu-load:2% remote-cpu-load:16%


750mb/20mb
Kelowna BC, Canada

Thanks Tom,

Bill
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed Jan 27, 2021 7:09 pm

This is an FYI on the public btest server I operate.

The btest server is actually an x86 ROS server running on a VmWare ESXi server.

I got this x86 ROS server free from Mikrotik many wears ago.

You see, I wrote up an article for how to build a 10-port 10-Gig-per-port Mikrotik x86 router , then posted the how-to in a Mikrotik forum. Well , I guess somebody with Mikrotik was happy and thus I got a free x86 ROS license. ((( Thank you Mikrotik ))).

So now you know where the btest ( x86 ROS ) server license actually came from.

North Idaho Tom Jones
 
manish
newbie
Posts: 39
Joined: Fri Jun 23, 2006 8:57 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Jan 30, 2021 8:02 am

Hi Tom,

Something weird happened yesterday, I was testing a link with just 50/50 for like 10 seconds, I did the test 2 times and the second time I did I could not stop the test, I rebooted the router like so many times but when ever it came online it would start to receive that traffic, I had to block the IP so the client does not get this incoming traffic. May be the test froze on server. Just thought of sharing.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Feb 01, 2021 5:43 pm

Hi Tom,

Something weird happened yesterday, I was testing a link with just 50/50 for like 10 seconds, I did the test 2 times and the second time I did I could not stop the test, I rebooted the router like so many times but when ever it came online it would start to receive that traffic, I had to block the IP so the client does not get this incoming traffic. May be the test froze on server. Just thought of sharing.

Are you using the newest version of ROS ?
Is your winbox updated to the newest latest version ?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Feb 11, 2021 6:55 pm

Feb 11'th 2021

I just now updated the public access x86_64 CHR btest server
from ROS v 6.48
to ROS v 6.48.1

IPv4: 23.162.144.120
IPv6: 2605:6340:0:1b::4

btest username: btest
btest password: btest

Note: This btest server is Ping-able. If you can't btest to it, then you might be behind a firewall or running a firewall.
Note: Please keep your btest(s) brief. This function of this btest server is to assist Mikrotik admins in determining and verifying their peak bandwidth throughput.
Note: After a few minutes of brief btest(ing), your remote IP address is auto blocked and will auto-release in about 1-hour. This is to prevent extended long term btest(ing) which is beyond my defined time-limits to perform brief btest(s).

As always, your comments indicating what country/city you are in and your btest results are always welcome ( and interesting ) - thank you.

FYI: This public access btest server is hosted and managed by Tom Jones with Red-Spectrum Communications ( located in North Idaho USA ). The ISP I work for is owned by the Coeur 'dAlene Tribe , which is a Native Sovereign Nation ( .nsn ) located in North Idaho.

Did you know this btest server has been on-line since January 2016 ?

North Idaho Tom Jones
 
itmethod
newbie
Posts: 34
Joined: Tue Feb 18, 2014 8:44 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Feb 12, 2021 8:00 pm

status: done
time-remaining: 0s
ping-min-avg-max: 46.4ms / 46.7ms / 52.9ms
jitter-min-avg-max: 1us / 288us / 6.45ms
loss: 0% (0/200)
tcp-download: 76.2Mbps local-cpu-load:7%
tcp-upload: 52.0Mbps local-cpu-load:3% remote-cpu-load:18%
udp-upload: 52.8Mbps local-cpu-load:4% remote-cpu-load:4%

This is on a Link that is supposed to be 100Mbps x 100Mbps

Tucson, AZ USA
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 16, 2021 6:01 pm

status: done
time-remaining: 0s
ping-min-avg-max: 46.4ms / 46.7ms / 52.9ms
jitter-min-avg-max: 1us / 288us / 6.45ms
loss: 0% (0/200)
tcp-download: 76.2Mbps local-cpu-load:7%
tcp-upload: 52.0Mbps local-cpu-load:3% remote-cpu-load:18%
udp-upload: 52.8Mbps local-cpu-load:4% remote-cpu-load:4%

This is on a Link that is supposed to be 100Mbps x 100Mbps

Tucson, AZ USA
Try the btest during an O-Dark-30 when your network is the least busy ( something like 3:30 AM ). Perform four tests:
UDP down
UDP up
TCP down
TCP up.

If you hit 100-Meg ( both directions ) during an O-Dark-30 but not during normal busy hours , then I would suspect your network or your upstream network may be saturated when the network is normally busy. If this is the case, try this:
- During a most busy time on your network , disable all feeds to customers/servers.
- Perform the above tests
- Re-enable your networks.
If the results are still not what you should be getting, contact your upstream provider.

North Idaho Tom Jones
 
Olugbengaonadipe
just joined
Posts: 2
Joined: Sun Feb 21, 2021 7:00 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Feb 21, 2021 7:31 am

hello,

i am new on the forum and i hope i am doing the right thing by posting here.

my company has a CCR1036 on which our IP transit service terminate. i have been trying to test the capacity provisioned over the IP TRANSIT service to no avail.

i am doing the test from the CCR1036 to 23.162.144.120 . find attached the capture

I need help
You do not have the required permissions to view the files attached to this post.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Feb 23, 2021 5:44 pm

hello,

i am new on the forum and i hope i am doing the right thing by posting here.

my company has a CCR1036 on which our IP transit service terminate. i have been trying to test the capacity provisioned over the IP TRANSIT service to no avail.

i am doing the test from the CCR1036 to 23.162.144.120 . find attached the capture

I need help
Olugbengaonadipe

From your Mikrotik, can you ping 23.162.144.120 ?
Can you try a btest TCP send to 23.162.144.120 ?
If both of the above work but no other test work, then I would suspect a firewall somewhere on your side may be the problem.

What is the public IP address of your Mikrotik ? I can look at my logs and see of you are temp blocked by my btest system.

North Idaho Tom Jones
 
nakimble
just joined
Posts: 4
Joined: Sat Mar 06, 2021 11:40 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Mar 06, 2021 11:50 pm

Aloha North Idaho Tom Jones,

I live in Hawaii on the island of Oahu and have Spectrum's 200Mbps/10Mbps plan. Here are my test results for today, Saturday, 06 Mar 2021, at ~2130GMT.

The test was for 30s, bi-directional, UDP, using my brand new MikroTik RB4011IGS+5HACQ2HND-IN.

status: done testing
duration: 31s
tx-current: 12.1Mbps
tx-10-second-average: 11.9Mbps
tx-total-average: 10.1Mbps
rx-current: 241.7Mbps
rx-10-second-average: 241.4Mbps
rx-total-average: 240.1Mbps
lost-packets: 856
random-data: no
direction: both
tx-size: 1500
rx-size: 1500
connection-count: 20
local-cpu-load: 0%
remote-cpu-load: 24%

God bless and God speed!

- Nick
 
tuckerdog
just joined
Posts: 9
Joined: Wed Dec 06, 2017 9:11 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sun Mar 07, 2021 2:03 am

Hi,

Just tried your server, for a ten-fifteen second shot...worked well.

Thank-you.
 
rosjordi
just joined
Posts: 2
Joined: Tue Nov 25, 2014 11:07 am
Location: Barcelona
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Mar 08, 2021 5:29 pm

Thanks,

from UK connection:
         status: done
      time-remaining: 0s
    ping-min-avg-max: 144ms / 145ms / 147ms
  jitter-min-avg-max: 1us / 131us / 2.98ms
                loss: 0% (0/200)
        tcp-download: 1.42Gbps local-cpu-load:4%
          tcp-upload: 1.56Gbps local-cpu-load:13% remote-cpu-load:82%
          udp-upload: 2.09Gbps local-cpu-load:4% remote-cpu-load:45%
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Mar 09, 2021 5:37 pm

Thanks,

from UK connection:
         status: done
      time-remaining: 0s
    ping-min-avg-max: 144ms / 145ms / 147ms
  jitter-min-avg-max: 1us / 131us / 2.98ms
                loss: 0% (0/200)
        tcp-download: 1.42Gbps local-cpu-load:4%
          tcp-upload: 1.56Gbps local-cpu-load:13% remote-cpu-load:82%
          udp-upload: 2.09Gbps local-cpu-load:4% remote-cpu-load:45%
rosjordi ,
nice - you've got a smoken fast Internet connection ! :)

Questions
- It this test through a home or business Internet connection ?
- Were you able to perform a UDP download btest ?
- Were the btest results what your were expecting ( slower or faster than you should be getting ) ?

North Idaho Tom Jones
 
Pr0gra2Mer
just joined
Posts: 2
Joined: Fri Mar 12, 2021 3:33 am
Location: Omsk

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Fri Mar 12, 2021 7:09 am

Aloha TomjNorthIdaho,
I live in the Russian city of Omsk, the tariff plan is 100 Mbps. I collect data on the bandwidth of the provider's channel. I found an opportunity to test the channel with the help of your service. Here are my test results.
stat12-03-2021.jpg
This week I am seeing a failure in the test. Previously measured 4 times a day, lasting 5 seconds ... external 91. *. 210.186.
bt12-03-2021.jpg
Doesn't work now.
You do not have the required permissions to view the files attached to this post.
Last edited by Pr0gra2Mer on Fri Mar 12, 2021 7:12 am, edited 1 time in total.
 
rianda08
just joined
Posts: 3
Joined: Sat Jan 23, 2021 10:27 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Mar 16, 2021 4:37 am

HI tom, i'am from Indonesia, here's the result from indonesia
from ip 103.xx8.143.1


unfortunately i can't test for tcp

is there any rule blocking it?

actually i've test couple times before, work for ftp but today i can't test for tcp
You do not have the required permissions to view the files attached to this post.
Last edited by rianda08 on Tue Mar 16, 2021 4:49 am, edited 3 times in total.
 
rianda08
just joined
Posts: 3
Joined: Sat Jan 23, 2021 10:27 am

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Mar 16, 2021 4:38 am

Aloha TomjNorthIdaho,
I live in the Russian city of Omsk, the tariff plan is 100 Mbps. I collect data on the bandwidth of the provider's channel. I found an opportunity to test the channel with the help of your service. Here are my test results.
stat12-03-2021.jpg
This week I am seeing a failure in the test. Previously measured 4 times a day, lasting 5 seconds ... external 91. *. 210.186.
bt12-03-2021.jpg
Doesn't work now.
same condition to me, udp stil working
 
Pr0gra2Mer
just joined
Posts: 2
Joined: Fri Mar 12, 2021 3:33 am
Location: Omsk

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Mar 16, 2021 5:21 am

same condition to me, udp stil working
udp works, but the outgoing speed is high, about 300 megabits.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Thu Mar 18, 2021 5:53 pm

FYI - Just thought it may be interesting to know ....

On average , there is always one or two Mikrotik admins somewhere performing a btest to my btest server.
Sometimes I will see the btest server with 5 to 10 different btest connections running.
Sometimes, I will drop the max btest bandwidth limiter settings and see some remote btest hitting close to 10-Gig ( full saturation of my primary 10-Gig internet feed ).

Funny ... somewhere around 6 or 7 years ago ( prior to me putting my btest server on-line ), I proposed a Mikrotik btest day where everybody would post their IP address and btest login/password information. This was a thought to allow all Mikrotik admins test their maximum bandwidth throughput the world everywhere. ---- Well , somebody back then posted a response as what it would be called :
" The day the Internet died "
I think it would of been interesting to discover what would of broken ( so that it could be fixed/upgraded ).

Something I would like to see would be a Mikrotik torrent btest feature. Something that would create the ability for a Mikrotik admin to perform TCP/UDP torrent-btest(s) to dozens or hundreds of remote Mikrotik torrent-btest servers , where the remote torrent-btest servers can be configured with maximum bandwidth settings. So rather than testing to one location, a torrent-btest could be testing to hundreds of torrent-btest servers throughput the entire world.

North Idaho Tom Jones
 
LoneRager
newbie
Posts: 41
Joined: Wed Nov 06, 2019 3:32 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Mar 22, 2021 7:22 pm

Tom, thanks so much for the server, we find it invaluable for our WISP business here in Michigan.

Anywhere we can send a donation?
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Apr 12, 2021 10:06 pm

Well, this is getting fun. I have now blocked 176.0.0.0-201.0.0.0. Sorry for the inconvenience to the rest of my fellow testers.

Best
Try it again , I just cleared out the Address-List of recent testers

North Idaho Tom Jones
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Tue Apr 13, 2021 8:18 pm

FYI - btest server was just now upgraded from ROS version 6.48.1 to the just released ROS version 6.48.2

If you encounter any issues with the btest server now running 6.48.2 , please post them here.

IPv4: 23.162.144.120
IPv6: 2605:6340:0:1b::4

btest username: btest
btest password: btest

Note; To use this Mikrotik public access btest server , you agree to the following terms and conditions:
#1 - You will not use or create any automatic btest scripts on a timed schedule to automatically perform btest(s) to this btest server.
#2 - You will not run extended btest(s) to this btest server which last longer than 30 seconds.
#3 - The use of this btest server is only permitted to perform brief 30-second btest(s).
#4 - You will never use this btest server to create a degrading bandwidth sustained load on your up-stream Internet provider.
#5 - You agree that I ( the owner/operator ) of this btest server may post your remote btest IP address(s) you used to test to my btest server.
#6 - All btest(s) you perform to this btest server will always be performed using a hands-on procedure without the use of any automated scripts.
#7 - You will never attempt a "dude" connection to this btest server.
#8 - You may perform up to 4 ( four ) btest(s) in a 24-hour period
#9 - You will pause a minimum of 5-minutes between btest(s)
#10 - Failure to follow the above listed requirements may result in actions on my part to permanently ban/block your IP addresses from my networks and this btest server.
#11 - I ask ( not required ) , that you post in this Mikrotik forum what country/city your are located in and your btest throughput results.
#12 - You understand these terms and conditions and you understand the purpose of this btest server is to assist all Mikrotik admins in determining the status/throughput capabilities of the networks they manage.


North Idaho Tom Jones
 
nakimble
just joined
Posts: 4
Joined: Sat Mar 06, 2021 11:40 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Sat Apr 24, 2021 5:06 am

Aloha North Idaho Tom Jones,

I live in Hawaii on the island of Oahu and just upgraded to Hawaiian Telcom's 750Mbps/300Mbps plan. Here are my test results for today, Friday, 23 Apr 2021, at ~0200GMT.

The test was for 30s, bi-directional, UDP, using my MikroTik RB4011IGS+5HACQ2HND-IN.

status: done testing
duration: 31s
tx-current: 300.1Mbps
tx-10-second-average: 300.0Mbps
tx-total-average: 299.0Mbps
rx-current: 799.1Mbps
rx-10-second-average: 800.0Mbps
rx-total-average: 799.6Mbps
lost-packets: 0
random-data: no
direction: both
tx-size: 1500
rx-size: 1500
connection-count: 20
local-cpu-load: 17%
remote-cpu-load: 46%

-Nick
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Topic Author
Posts: 1492
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Mon Apr 26, 2021 6:37 pm

Aloha North Idaho Tom Jones,

I live in Hawaii on the island of Oahu and just upgraded to Hawaiian Telcom's 750Mbps/300Mbps plan. Here are my test results for today, Friday, 23 Apr 2021, at ~0200GMT.

The test was for 30s, bi-directional, UDP, using my MikroTik RB4011IGS+5HACQ2HND-IN.

status: done testing
duration: 31s
tx-current: 300.1Mbps
tx-10-second-average: 300.0Mbps
tx-total-average: 299.0Mbps
rx-current: 799.1Mbps
rx-10-second-average: 800.0Mbps
rx-total-average: 799.6Mbps
lost-packets: 0
random-data: no
direction: both
tx-size: 1500
rx-size: 1500
connection-count: 20
local-cpu-load: 17%
remote-cpu-load: 46%

-Nick
nakimble - It's always good to hear that an Internet account is able to measure the expected speed of an an Internet account. It's a plus when the actual measurements are greater than the expected speeds.
 
LoneRager
newbie
Posts: 41
Joined: Wed Nov 06, 2019 3:32 pm

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Wed May 12, 2021 4:15 pm

Im getting error "disconnected" the last 2 weeks.
Is the server still up?
FYI - btest server was just now upgraded from ROS version 6.48.1 to the just released ROS version 6.48.2

If you encounter any issues with the btest server now running 6.48.2 , please post them here.

IPv4: 23.162.144.120
IPv6: 2605:6340:0:1b::4

btest username: btest
btest password: btest

Note; To use this Mikrotik public access btest server , you agree to the following terms and conditions:
#1 - You will not use or create any automatic btest scripts on a timed schedule to automatically perform btest(s) to this btest server.
#2 - You will not run extended btest(s) to this btest server which last longer than 30 seconds.
#3 - The use of this btest server is only permitted to perform brief 30-second btest(s).
#4 - You will never use this btest server to create a degrading bandwidth sustained load on your up-stream Internet provider.
#5 - You agree that I ( the owner/operator ) of this btest server may post your remote btest IP address(s) you used to test to my btest server.
#6 - All btest(s) you perform to this btest server will always be performed using a hands-on procedure without the use of any automated scripts.
#7 - You will never attempt a "dude" connection to this btest server.
#8 - You may perform up to 4 ( four ) btest(s) in a 24-hour period
#9 - You will pause a minimum of 5-minutes between btest(s)
#10 - Failure to follow the above listed requirements may result in actions on my part to permanently ban/block your IP addresses from my networks and this btest server.
#11 - I ask ( not required ) , that you post in this Mikrotik forum what country/city your are located in and your btest throughput results.
#12 - You understand these terms and conditions and you understand the purpose of this btest server is to assist all Mikrotik admins in determining the status/throughput capabilities of the networks they manage.


North Idaho Tom Jones

Who is online

Users browsing this forum: Bing [Bot], Majestic-12 [Bot], nuwang13 and 62 guests