Community discussions

MUM Europe 2020
 
VolanD
just joined
Topic Author
Posts: 13
Joined: Thu Mar 07, 2013 10:08 am

Mikrotik. Traffic-flow

Wed Apr 20, 2016 8:24 am

Hello!

I use a MikroTik with enabled traffic-flow. How can I set a direction of traffic for accounting on the interface (Like "ip flow egress" in IOS)?

Sorry for my English.
 
VolanD
just joined
Topic Author
Posts: 13
Joined: Thu Mar 07, 2013 10:08 am

Re: Mikrotik. Traffic-flow

Sun Jun 19, 2016 7:18 am

Up.
 
Feklar
Forum Guru
Forum Guru
Posts: 1726
Joined: Tue Dec 01, 2009 11:46 pm

Re: Mikrotik. Traffic-flow

Mon Jun 20, 2016 8:15 pm

Specify the interface you want to use in "/ip traffic-flow" then specify where you want to send the traffic-flow information in "/ip traffic-flow target"

http://wiki.mikrotik.com/wiki/Manual:IP/Traffic_Flow
 
VolanD
just joined
Topic Author
Posts: 13
Joined: Thu Mar 07, 2013 10:08 am

Re: Mikrotik. Traffic-flow

Wed Jun 22, 2016 5:32 pm

Thank for your reply

But I need to set type of accounting traffic (from user, to user or both) on the interface. For example, I want to see only traffic TO user on the specified interface. In Cisco IOS I can set "ip flow egress" or "ip flow ingress". How can I do that in RouterOS ?
 
User avatar
nickshore
Member
Member
Posts: 473
Joined: Thu Mar 03, 2005 4:14 pm
Location: Suffolk, UK.
Contact:

Re: Mikrotik. Traffic-flow

Wed Jun 22, 2016 6:23 pm

You can't do that.

You would need to filter it in the collector

Nick
Nick Shore MTCNA MTCWE MTCRE MTCINE MTCTCE
LinITX.com - MultiThread Consultants
Get your MikroTik RBs and Training: http://linitx.com/brand/mikrotik
Official UK MikroTik Distributor
IRC chan: #routerboard on irc.z.je (IPv4 and IPv6)
 
VolanD
just joined
Topic Author
Posts: 13
Joined: Thu Mar 07, 2013 10:08 am

Re: Mikrotik. Traffic-flow

Thu Jul 14, 2016 7:17 pm

It's possible if I use v9 NetFlow. But what about v5? :)

Who is online

Users browsing this forum: abdulrehmanis and 49 guests