" boards are compliant with IEEE802.3af Power over Ethernet standard (except power over datalines) and accept 48V powering over up to 100m (330 ft) long Ethernet cable connected to the Ethernet port (J5 or J6)."
I can connect with shorter (< 40m) POE cable , so my POE should be OK.
But then again straight supply to power input and long POE won't work.
I am using CAT5e STP cable
There is also a mention
" In case it is planned to power the board up from a
standard 48V DC PoE injector (note that the RouterBOARD
does not support power over datalines), the JP2 jumper
should be opened."
Maybe I should try this tomorrow. Need to look for the JP2 jumper..
Anyone have tried the need to remove this jumper before.