Community discussions

MikroTik App
 
kunago
just joined
Topic Author
Posts: 18
Joined: Sun Mar 09, 2014 1:58 pm

[Bug, 6.36rc37] Unable to set/edit Outgoing Interface list in NAT table

Sat Jul 09, 2016 12:23 am

When I create a firewall rule in NAT table that should masquerade outgoing WAN interfaces (by means of Outgoing Interfaces list), the list is set to the default value when the rule is saved.

To reproduce:
/interface list add name=WAN
/interface list member add interface=ether01 list=WAN
/interface list member add interface=ether02 list=WAN
/ip firewall nat add action=masquerade chain=srcnat log-prefix="" out-interface-list=WAN
Now when one tries to change the Outgoing interface list to anything but WAN, it automatically goes back to WAN when saved.
Can this be verified by others?
 
jarda
Forum Guru
Forum Guru
Posts: 7603
Joined: Mon Oct 22, 2012 4:46 pm

Re: [Bug, 6.36rc37] Unable to set/edit Outgoing Interface list in NAT table

Sat Jul 09, 2016 7:27 am

Sometimes the winbox doesn't follow the new features well. Have you tried it by cli?
 
jarda
Forum Guru
Forum Guru
Posts: 7603
Joined: Mon Oct 22, 2012 4:46 pm

Re: [Bug, 6.36rc37] Unable to set/edit Outgoing Interface list in NAT table

Sat Jul 09, 2016 7:28 am

Sometimes the winbox doesn't follow the new features well. Have you tried it by cli?

Who is online

Users browsing this forum: anav and 82 guests