Hello All.. I have a CCR1009 on a property. I have a 350/20 TWC Connection.
I use a hotspot a simple hotspot config. I use vlan 100 for wireless traffic.
CCR Setup
ETH1-DHCP (TWC)
ETH7 - MGMT Network ( 192.168.0.0/24
EHT8- LAN (192.168.10.1/21
Core Switch 26 POE Port.
I have 1-15 Ruckus AP's.
All wireless APS are tagged for VLAN 100 for traffic.
25- Goes to ETH7 FOR MGMT
26 - Goes to ETH8 for LAN Traffic
There is times when a user that has Windows Vista they'r not able to receive a DHCP off my network for some odd reason. What I have to do is remove VLAN10 and put vlan10 to the Mikrotik and he is able to obtain an IP address after that. I have alot of Mikrotiks deployed in a lot of places and I have to do this often. I have tried several firmware but no firmware fixes that issue.
I have tried many adjustments on the DHCP sever but it makes no change. I even created input rules for port 67,68 and no change either. I have a use a Bridge. I have tried it with a bridge and without a bridge same stuff. I do have RSTP turned off since i don't use that. I have that turned off throughout my switch.
I have a Terms of agreement page. There is times where users have a hard time seeing the tos page and there users who have no issues at all. So once they connect to the wifi, they should be taken to my disclaimer page but that does not happen. I know at times we have them go a page that is not cache or anything like that. We have them go to abc.com and it redirects them to my disclaimer page. 95% that works and at times it does not work.
Is there a way that I can make it when they connect to the wireless network it forces them to go to my terms of service page?
If anyone can help that would be great.
I will throw it out there. I have a Nomadix at a property same setup as with a CCR and I have no DHCP issues with Vista/Windows7 Enterprises PC's. I also have no issues with guest seeing my tos page.
If you guys need a config of my CCR please let me know.
Thanks All