Community discussions

MikroTik App
 
hamed5034
just joined
Topic Author
Posts: 18
Joined: Mon Jul 18, 2016 5:13 pm

Problem in connecting to Router with IP

Sun Jul 31, 2016 8:54 am

Hello,

I cannot conect to my router via IP address and port.
What should I do?
www service is enabled.

Regards
Hamed
 
olkitu
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Sat Feb 20, 2016 7:04 pm

Re: Problem in connecting to Router with IP

Sun Jul 31, 2016 9:31 am

Do you have correct IP address on your PC and connected to router (ether2)? Can you ping your router from computer?

If you can't, you can reset your router to default settings and then get connection to router. Router should by default have DHCP Server enabled and you get 192.168.88.254 IP. Router IP is network first 192.168.88.1. 
Network Specialist

Need know where is cellular tower? Try CellMapper to get know where is cellular tower:
https://www.cellmapper.net/map
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1290
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: Problem in connecting to Router with IP

Sun Jul 31, 2016 9:53 am

Can you connect via MAC address in WinBox?
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
hamed5034
just joined
Topic Author
Posts: 18
Joined: Mon Jul 18, 2016 5:13 pm

Re: Problem in connecting to Router with IP

Mon Aug 01, 2016 4:23 pm

Do you have correct IP address on your PC and connected to router (ether2)? Can you ping your router from computer?

If you can't, you can reset your router to default settings and then get connection to router. Router should by default have DHCP Server enabled and you get 192.168.88.254 IP. Router IP is network first 192.168.88.1. 
Hello,
I want to connect to my router from out of its network. I want to connect to it via its valid IP address.
 
hamed5034
just joined
Topic Author
Posts: 18
Joined: Mon Jul 18, 2016 5:13 pm

Re: Problem in connecting to Router with IP

Mon Aug 01, 2016 4:24 pm

Can you connect via MAC address in WinBox?
Yes I can.
But I want to connect to it from another devices via its IP address.
 
pe1chl
Forum Guru
Forum Guru
Posts: 6673
Joined: Mon Jun 08, 2015 12:09 pm

Re: Problem in connecting to Router with IP

Mon Aug 01, 2016 4:44 pm

Maybe you don't have the IP services for www/ssh/telnet/winbox (whatever you want to use) enabled, or you
may have installed one or more "input" firewall rules that block the connection?
 
hamed5034
just joined
Topic Author
Posts: 18
Joined: Mon Jul 18, 2016 5:13 pm

Re: Problem in connecting to Router with IP

Mon Aug 01, 2016 6:05 pm

Maybe you don't have the IP services for www/ssh/telnet/winbox (whatever you want to use) enabled, or you
may have installed one or more "input" firewall rules that block the connection?
www service is enabled.
I think my issue is related to Firewall rules. Who can I check it?
 
hamed5034
just joined
Topic Author
Posts: 18
Joined: Mon Jul 18, 2016 5:13 pm

Re: Problem in connecting to Router with IP

Wed Aug 03, 2016 9:40 am

Maybe you don't have the IP services for www/ssh/telnet/winbox (whatever you want to use) enabled, or you
may have installed one or more "input" firewall rules that block the connection?
Hello,
Please see my firewall rules:
Image
 
marktomlinson
newbie
Posts: 35
Joined: Wed Aug 03, 2016 12:22 pm

Re: Problem in connecting to Router with IP

Wed Aug 03, 2016 1:29 pm

Please correct me if I have misunderstood, but my understanding is that you want to connect to the WebFig page using the External IP address?

In this case, you are going to need to create an input firewall rule that allows tcp port 80 and stick it up above any deny rules
 
hamed5034
just joined
Topic Author
Posts: 18
Joined: Mon Jul 18, 2016 5:13 pm

Re: Problem in connecting to Router with IP

Wed Aug 03, 2016 2:38 pm

Please correct me if I have misunderstood, but my understanding is that you want to connect to the WebFig page using the External IP address?

In this case, you are going to need to create an input firewall rule that allows tcp port 80 and stick it up above any deny rules
Hello,
Yes, I want to connect to the WebFig page using the External IP address.
Please see this screenshot:
Image
Is that correct?
 
marktomlinson
newbie
Posts: 35
Joined: Wed Aug 03, 2016 12:22 pm

Re: Problem in connecting to Router with IP

Wed Aug 03, 2016 3:32 pm

yup - that should allow traffic on port 80 from anywhere, try it on your public IP address :)

Who is online

Users browsing this forum: eworm, Google [Bot], markos222, sbtbone and 83 guests