RB2011.

Now I have 1 WLAN and 2 Virtual AP - so 3 networks. All WLANS have their own bridge, different subnets, different DHCP and so on.

WLAN1
192.168.10.0/24
WLAN2
192.168.20.0/24
WLAN3
192.168.30.0/24

Now, our TV decoders require to be connected to the network with same subnet (let's say It'll be 192.168.10.0/24) because of the MultiRoom feature (so you can watch different TV channels on different TV's - decoders must exchange keys).

Is there a way, to put all three WLANs on same bridge (bridge1) but assign different IP ranges to those WLANS?

I'd like DHCP servers assign these ranges to WLANS: (bridge1 IP = 192.168.10.1)

WLAN1 DHCP
192.168.10.2 - 192.168.10.50
WLAN2 DHCP
192.168.10.51 - 192.168.10.100
WLAN3 DHCP
192.168.10.101 - 192.168.10.150

Thanks for any help.

Bart

Bump.

Can't you set up another virtual AP just for the TV decoders?

There are a bunch of ways to handle this... Can you post a network diagram?


Sent from my iPad using Tapatalk

Can't you set up another virtual AP just for the TV decoders?

This would be the easiest thing to do, but not here. wlan2 and wlan 3 (virtual aps) are here for Repeater purposes. There are two other devices (TP-LINKS) connecting to wlan2 and wlan3. If I would create wlan4 - signal would be too weak for TV decoders to receive it.

Diagram looks like this:

So are your APs wirelessly connected?... I'm missing something I think... Post your exports also...