Community discussions

MikroTik App
 
haryanto04
just joined
Topic Author
Posts: 3
Joined: Fri Sep 30, 2016 4:12 am

CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Fri Sep 30, 2016 4:28 am

Dear master,

Please share, my ISP is using CCR 1072 for pppoe users. We use bridge interface feature to bridging some physical interface. Pppoe service about 950 connection and 900mbps bandwidth.
From beginning my router and configuration running well for 6month no issue.
Starting this week my router become crazy. Sometimes my cpu goes overload, and disconnecting most of the pppoe connection. Following with bandwidth reduce for other client that not pppoe disconnected.
The disconnected pppoe every 6hour and does not sure about the time.
No flooding traffic, and i already set some rules filter for security like ddos and other things.
I still can not knot how to figure this out, and still dont know the solution.
Does somebody has been face this problem?
Please help i need sharing the experience, im stuck with my problem.
 
lfernandosg
newbie
Posts: 25
Joined: Fri Jul 15, 2016 11:36 pm

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Fri Sep 30, 2016 12:06 pm

Mudar para portuguêsFechar tela cheia
I have this same problem in some ccr1036. Here at the problem, a paragraph cpu up 80% in the firewall. You quickly found what makes your cpu profile climb / tool profile? I made some changes in pppoe profile I'm analyzing tomorrow Even if the problem does not occur, I believe That was resolved.
To help YOU, Send to Your firewall configurations do and that the profile of His pppoe that ccr1072.
 
haryanto04
just joined
Topic Author
Posts: 3
Joined: Fri Sep 30, 2016 4:12 am

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Sat Oct 01, 2016 4:29 am

Im still facing this problem, already one week my router become crazy. Im not sure why the pppoe suddenly start to disconnected and cpu overload, all my router become slow respon.
 
lfernandosg
newbie
Posts: 25
Joined: Fri Jul 15, 2016 11:36 pm

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Sat Oct 01, 2016 3:14 pm

Im still facing this problem, already one week my router become crazy. Im not sure why the pppoe suddenly start to disconnected and cpu overload, all my router become slow respon.


I try to help you compare and it will make the changes I made in my ccr1036 here put your firewall rules mangle, filter and etc ..

also puts the settings of your profile PPPoe + server for me to analyze. You use other server that PPPoe server as OSPF, MPLS, VRF?
 
joiku
just joined
Posts: 1
Joined: Tue May 30, 2017 10:24 am

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Tue May 30, 2017 10:26 am

Same problem. Anyone with news or tips?
 
Ape
Member Candidate
Member Candidate
Posts: 177
Joined: Sun Oct 06, 2013 3:32 pm
Location: Freiburg, Germany
Contact:

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Wed May 31, 2017 4:10 pm

Hi,

are you using NAT masquerade on the CCR?
If you you do and you have a static public address, use a static srcnat instead.

Regards,
Ape
 
User avatar
Letni
Member
Member
Posts: 376
Joined: Tue Dec 05, 2006 5:16 am
Location: South Carolina

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Wed May 31, 2017 4:24 pm

Sounds like someone should have come to MUM.

Good thing the MUM can come to you.

Janis Megis addresses several common issues you may be experiencing with PPPoE.

Please watch his talk. I know he would appreciate not getting one less support email. ;)

Most underused and overused RouterOS tools and features

He talks about PPPoE, NAT and routing issues that you are probably experiencing.

-Louis
 
Ape
Member Candidate
Member Candidate
Posts: 177
Joined: Sun Oct 06, 2013 3:32 pm
Location: Freiburg, Germany
Contact:

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Wed May 31, 2017 4:26 pm

Thanks Louis.

I had this talk in mind while writing my post.
 
Jeanluck
Member Candidate
Member Candidate
Posts: 280
Joined: Tue Apr 19, 2011 7:07 pm

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Thu Aug 30, 2018 5:53 pm

Is this problem solved with v.6.42.x in 1072?
(because of change of firmware for CPU tile optimize)
 
haryanto04
just joined
Topic Author
Posts: 3
Joined: Fri Sep 30, 2016 4:12 am

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Thu Aug 30, 2018 6:04 pm

Problem solved with disable nat rules.
Last time my problem causi g with nat rules.
Maybe mikrotik have solve this problem on new ROS update.
 
Jeanluck
Member Candidate
Member Candidate
Posts: 280
Joined: Tue Apr 19, 2011 7:07 pm

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Thu Aug 30, 2018 7:10 pm

I use only public IPs, and I have no "masquerade" rules, and I have no "dstnat" (only are executed under restricted conditions to access to managemen devices), and I have no OSPF, so, although I saw https://www.youtube.com/watch?v=D80_a_O86jc i have no answer to my problem :-(
I have two srcnat rules only for my management devices with private ips

Some idea?
 
sstest
just joined
Posts: 2
Joined: Thu Oct 25, 2018 3:50 pm

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Mon Oct 29, 2018 8:22 pm

Hi there,

Anyone got a solution to this one, we have about 2000 PPPoE connections and our CCR1036-8G-2S+ has been running without a problem for the last 6 months, now suddenly this is happening, high CPU usage, PPPoE users disconnect, router hangs, no traffic flowing, tool/profile shows firewall and networking at 40-50%. Router is PPPoE concentrator, Static Routing, Static NAT for public Internet access, 2 Gbps traffic. The weirdest issue is that this worked before, even with 2500+ connections (although less bandwidth about 1 Gbps ).

Is this an Apple style strategy, upgrade to newer RouterOS version buy new/more hardware for the same setups? Does anyone have an Idea how to tackle this problem, apart form buying another CCR and doing NAT and PPPoE separately?

Thanks for your advice,
 
techsovereignty
just joined
Posts: 6
Joined: Mon Mar 23, 2020 3:33 pm

Re: CCR1072 950 pppoe connection cpu overload when pppoe disconnected

Tue May 11, 2021 3:24 pm

Dear master,

Please share, my ISP is using CCR 1072 for pppoe users. We use bridge interface feature to bridging some physical interface. Pppoe service about 950 connection and 900mbps bandwidth.
From beginning my router and configuration running well for 6month no issue.
Starting this week my router become crazy. Sometimes my cpu goes overload, and disconnecting most of the pppoe connection. Following with bandwidth reduce for other client that not pppoe disconnected.
The disconnected pppoe every 6hour and does not sure about the time.
No flooding traffic, and i already set some rules filter for security like ddos and other things.
I still can not knot how to figure this out, and still dont know the solution.
Does somebody has been face this problem?
Please help i need sharing the experience, im stuck with my problem.
Hi almost same our Mikrotik CCR 1072-1G-8SFP+, we experience also 100% CPU but on peak hours, we have 1Gbps Bandwidth and use PPPoE server with have 600 clients, I have no NAT on firewall, I only block the client to access the 1072 on the firewall

Who is online

Users browsing this forum: Bing [Bot], ccrsxx, Google [Bot], GoogleOther [Bot], onnyloh and 57 guests