Serious problem on at least 2 Powerboxes on 6.38.1, setps to reproduce:
Do a system reset configuration with no default config.
Using winbox connect via Mac and add an address to say, ether2, 192.168.88.1/24
Now, using cli:
Code: Select all
[admin@MikroTik] > system resource print
uptime: 11m8s
version: 6.38.1 (stable)
build-time: Jan/13/2017 05:51:35
factory-software: 6.34.4
free-memory: 46.9MiB
total-memory: 64.0MiB
cpu: MIPS 24Kc V7.4
cpu-count: 1
cpu-frequency: 650MHz
cpu-load: 9%
free-hdd-space: 5.7MiB
total-hdd-space: 16.0MiB
write-sect-since-reboot: 699
write-sect-total: 2837
bad-blocks: 0%
architecture-name: mipsbe
board-name: PowerBOX
platform: MikroTik
[admin@MikroTik] > export
# jan/02/1970 00:11:57 by RouterOS 6.38.1
# software id = S686-7SJC
#
/ip address
add address=192.168.88.1/24 interface=ether2 network=192.168.88.0
[admin@MikroTik] > export file=r1
[admin@MikroTik] > file pr
# NAME TYPE SIZE CREATION-TIME
0 flash disk jan/01/1970 00:00:00
1 pub directory jan/02/1970 00:12:11
2 r1.rsc script 153 jan/02/1970 00:12:36
3 flash/log.0.txt .txt file 394 feb/16/2017 00:54:23
4 flash/skins directory jan/01/1970 00:00:02
[admin@MikroTik] > system reset-configuration no-defaults=yes run-after-reset=r1.rsc
Dangerous! Reset anyway? [y/N]: yPlease help
NTB
EDIT: Works perfectly on RB3011 -6.38.1
