Community discussions

 
hamza202
just joined
Topic Author
Posts: 6
Joined: Tue Mar 07, 2017 10:33 pm

PPPoE Server Issue

Thu Mar 09, 2017 6:36 pm

Help...
i have a CCR1016 for pppoe server ....!
ether1 wan have 200Mb...!
ether2-11 pppoe server ...
300 users active now but wan just send 97Mb data ...
when wan come on 97Mb ... stop ...
not going more data
 
andriys
Forum Guru
Forum Guru
Posts: 1187
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: PPPoE Server Issue

Thu Mar 09, 2017 6:41 pm

What makes you think your problem is in any way related to the PPPoE?
I'd go and check the link on your WAN interface first- it sounds like it's negotiated speed is 100M.
 
hamza202
just joined
Topic Author
Posts: 6
Joined: Tue Mar 07, 2017 10:33 pm

Re: PPPoE Server Issue

Thu Mar 09, 2017 6:53 pm

wan is ok ...
problem just for pppoe users
ether12 for dhcp ... ! (for my office)

when speed test on dhcp show me 200Mb
 
lambert
Long time Member
Long time Member
Posts: 533
Joined: Fri Jul 23, 2010 1:09 am

Re: PPPoE Server Issue

Thu Mar 09, 2017 10:23 pm

Firmware version?
 
hamza202
just joined
Topic Author
Posts: 6
Joined: Tue Mar 07, 2017 10:33 pm

Re: PPPoE Server Issue

Fri Mar 10, 2017 9:44 pm

Firmware version?
test on 6,37.1
6,38
3,38.2
but same issue
 
lambert
Long time Member
Long time Member
Posts: 533
Joined: Fri Jul 23, 2010 1:09 am

Re: PPPoE Server Issue

Fri Mar 10, 2017 11:42 pm

Look for dynamic Simple Queue entries for the PPPoE users. If they exist, for what speeds are they set?

Look at the IP fIrewall Mangle rules and make sure the MSS rules are dynamically inserted at the top, or very nearly, of the list.

I have some PPPoE clients but the fastest plan they can have is 100Mbps. I'm also only on 6.36.4 at this time.

Who is online

Users browsing this forum: MSN [Bot] and 107 guests