Community discussions

 
Trojahn
just joined
Topic Author
Posts: 20
Joined: Wed May 24, 2006 5:20 pm
Location: Rio de Janeiro, Brazil

PPPoE Issue (2.9.35)

Mon Nov 13, 2006 3:39 pm

I have a PPPoE server with about 700 simultaneous connections working fine on a MT 2.9.29...

From time to time, I get some users that get stuck as connected and I can't remove them unless I reboot the whole server... I saw a fix to this issue on the version 2.9.35 so I updated...

As soon MT restarts, users can't authenticate with my RADIUS server. Running a tcpdump on the RADIUS server, it seems that MT sends a few auth-requests and then just stops sending them... While in MT, the tunnel interfaces are ALL in a "authenticating..." state... Only 10 people got connected and all the others got stuck in that auth state...

I had to downgrade again to 2.9.29...

Any thougths?
 
User avatar
magic
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Fri Mar 04, 2005 9:53 pm
Location: Sopron, Hungary
Contact:

Mon Nov 13, 2006 4:08 pm

I had the same trouble with 2.9.35. I downgraded the 2.9.34 and my trouble went gone.
Send the supout file the support.

Krisz
 
jober
Long time Member
Long time Member
Posts: 691
Joined: Fri May 28, 2004 12:16 pm
Location: Louisiana,USA

Mon Nov 13, 2006 5:55 pm

Are these wireless customers connecting or DSL?

I am just wondering because I was thinking about using MT for our DSL auth.
 
Trojahn
just joined
Topic Author
Posts: 20
Joined: Wed May 24, 2006 5:20 pm
Location: Rio de Janeiro, Brazil

Mon Nov 13, 2006 8:52 pm

Wireless
 
User avatar
sten
Forum Veteran
Forum Veteran
Posts: 920
Joined: Tue Jun 01, 2004 12:10 pm

Wed Nov 15, 2006 6:13 pm

Are these wireless customers connecting or DSL?

I am just wondering because I was thinking about using MT for our DSL auth.
You need to use v2.9.24 to get the most stable pppoe termination, regardless whether it is copper, fiber or wireless.
v2.9.26 and older has (severe) issues with pppoe "ghosts".
Don't know about v2.9.35 (with the updated ppp package) but i'll let you know.
Move along. Nothing to see here.
 
cibernet
Long time Member
Long time Member
Posts: 610
Joined: Fri Jan 28, 2005 7:22 pm
Location: Marcos Juárez, Córdoba, Argentina
Contact:

Thu Nov 16, 2006 2:23 am

Same issues here (ROS 2.9.35), users disconects every minute... Sent .rif file to MT.-


Best Regards
José Ignacio Acosta
MikroTik Consultant IDAR0001
Mikronet

Movile: +54 9 3472-624722
Email/Msn: info[at]mikronet.com.ar
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Thu Nov 16, 2006 10:19 am

cibernet - did you try with the new (presumably fixed) ppp package for 2.9.35 Normunds posted yesterday?

Best regards,
Christian Meis
Best regards,
Christian Meis
 
cibernet
Long time Member
Long time Member
Posts: 610
Joined: Fri Jan 28, 2005 7:22 pm
Location: Marcos Juárez, Córdoba, Argentina
Contact:

Thu Nov 16, 2006 5:22 pm

cibernet - did you try with the new (presumably fixed) ppp package for 2.9.35 Normunds posted yesterday?

Best regards,
Christian Meis
No, but i will, and post the verdict here :P


Best Regards
José Ignacio Acosta
MikroTik Consultant IDAR0001
Mikronet

Movile: +54 9 3472-624722
Email/Msn: info[at]mikronet.com.ar
 
rootlinux
just joined
Posts: 18
Joined: Thu May 25, 2006 6:01 am

Mon Nov 20, 2006 11:42 am

So, it this fixed in 2.9.37? I am having 2.9.35 with PPPoE too...going to launch our PPPoE service via wireless too, :(

Who is online

Users browsing this forum: No registered users and 89 guests