Hi guys,
I'm struggling with a situation here, I have a EPON Huawei HG323UEG in bridge mode and a hAP Lite set up in a basic PPPoE client on ether1, ether2 master, bridge1 with ether2 and wlan1 as ports.
What I'm seeing is escessive "link duplex mismatch" errors on port ether1. The link speed on ether1 is also only 100 half duplex.
I tried all suggestions found on the forum with unchecking "auto-negociation", "flow control to Off, On or auto", setting the same ethernet options on WAN and LAN interfaces, etc, but I still can't manage to get 100 Mbps full duplex and get rid of those duplex mismatch errors. I also get very low speeds like 10 - 20 Mbps Internet when I should have 90, wich I do if I connect my laptop directly to the EPON and do the PPPoE connection directly.
I also upgraded both packages and routerboard to latest version, no change.
When I connect my laptop directly to the EPON I get a auto-negociated 1Gbit connection and I can also set a 100Mbps one.
What I am missing?