I found this post on google and i want to do a simple port forward aswell. I followed pcunite example but it doesnt work.
I have a hAP ac with default configuration and I'm trying to open ports so people from the outside can join my quake 3 server.
export compact gives this
# aug/15/2018 15:19:11 by RouterOS 6.43rc51
#
#
# model = RouterBOARD 962UiGS-5HacT2HnT
#
/ip firewall filter
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" \
connection-nat-state=!dstnat connection-state=new disabled=yes in-interface-list=WAN
add action=accept chain=input comment="Accept established related" connection-state=\
established,related
add action=accept chain=input comment="Allow LAN access to router and Internet" in-interface=\
bridge
add action=drop chain=input comment="Drop all other input"
add action=accept chain=forward comment="Accept established related" connection-state=\
established,related
add action=accept chain=forward comment="Allow LAN access to router and Internet" \
connection-state=new in-interface=bridge
add action=accept chain=forward comment="Accept Port forwards" connection-nat-state=dstnat
add action=drop chain=forward comment="Drop all other forward"
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=out,none \
out-interface=ether1-WAN out-interface-list=WAN
add action=dst-nat chain=dstnat dst-port=27960 in-interface=ether1-WAN protocol=tcp to-addresse
192.168.6.3 to-ports=27960
add action=dst-nat chain=dstnat dst-port=27960 in-interface=ether1-WAN protocol=udp to-addresse
192.168.6.3 to-ports=27960