Community discussions

MUM Europe 2020
 
User avatar
ofendt
just joined
Topic Author
Posts: 19
Joined: Mon Jun 20, 2011 10:17 pm

PLEASE UPDATE your Default Config

Wed Sep 13, 2017 12:29 pm

Dear MIKROTIK Team,

i am a fan of your products - but i am very unhappy with your Default config.

IF i connect a new access-Point with only ETH1 to my Network i do have an OPEN ACCESS-POINT for everybody and i have no Chance to configure it via CABLE.
Because of the Firewall Settings i even dont see it at all.
So PLEASE

Optimum would be:
If a CAPS-MAN Server is online - then use this and open the INTERNAL Firewall AT LEAST for the CAPSMAN-Server.

Usefull would be:

Show the new device on ETH-Interfaces in WINBOX - open the FIREWALL on ETH's and SECURE OR DISABLE the WLAN

Thanks,
Oliver Fendt
 
User avatar
Steveocee
Forum Guru
Forum Guru
Posts: 1115
Joined: Tue Jul 21, 2015 10:09 pm
Location: UK
Contact:

Re: PLEASE UPDATE your Default Config

Wed Sep 13, 2017 12:34 pm

You should still be able to discover the AP via L2 with Winbox. Alternatively, connect to the open wireless and connect to the config that way, reset the configuration and then cable in.
Steve "Steveocee" Carter
PC Gamer, Airsofter, MikroTik Nerd
My Website - My MikroTik Tutorials
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: PLEASE UPDATE your Default Config

Wed Sep 13, 2017 12:35 pm

You should connect to the open access point and set a password, just like the instruction sheet suggests.
Most home users have no idea what is LAN or ethernet cable.

If you mass-deploy them, I suggest looking at pre-configuring them with your own config. There are several options, TR-069, Flashfig etc. If you use CAPsMAN, you can boot into CAP mode by holding the little button.
No answer to your question? How to write posts
 
ferriston
just joined
Posts: 2
Joined: Mon Oct 16, 2017 5:54 am

Re: PLEASE UPDATE your Default Config

Fri Feb 02, 2018 6:56 pm

Hey Ofendt,

I think we could use your help. Please give me a shout if you can.

Ferris.

Who is online

Users browsing this forum: fusa, shareefkhan and 113 guests