Community discussions

 
shivansps
just joined
Topic Author
Posts: 24
Joined: Fri Sep 22, 2017 1:18 am

2 gateway failover 2nd gateway is not enabled

Fri Sep 29, 2017 6:41 pm

In WAN i have a dynamic DHCP Client, ive enabled a filter rule to add "check gateway" on it.
The 2nd gateway is inside the LAN, this is because there is an option on the pcs to manually switch gateways in order to use the other ISP if they wish.

So, Gateway 1 = dhcp client with check gateway
Gateway 2 = 192.168.0.2
Router IP: 192.168.0.1
Lan IP pool : 192.168.0.3-192.168.0.254

Image

Ive tried a few things, but even if i disable the ether1 interface, and thus gateway 2 is the only one left, is not used.

The only way to make this to work is to enable a mangle rule to mark route from the in-interface bridge to speedy, thats the gateway2...
 
User avatar
Anumrak
Forum Veteran
Forum Veteran
Posts: 993
Joined: Fri Jul 28, 2017 2:53 pm

Re: 2 gateway failover 2nd gateway is not enabled

Thu Oct 26, 2017 2:19 pm

It is in defferent vrf. Of course you need mangle it.

Who is online

Users browsing this forum: Bing [Bot] and 59 guests