Community discussions

 
markom
Member Candidate
Member Candidate
Topic Author
Posts: 105
Joined: Thu Dec 17, 2009 10:42 pm

RB960PGS + POE cisco meraki mr33

Thu Dec 07, 2017 12:13 pm

I have problem to power cisco meraki mr33 from 960PGS.
both devices say 802.3af PoE compatible but cisco want power on on mikrotik.
I am using 12V 2A powering to mikrotik. Does some one have similar problem in the past ?
 
User avatar
cdiedrich
Forum Veteran
Forum Veteran
Posts: 905
Joined: Thu Feb 13, 2014 2:03 pm
Location: Basel, Switzerland // Bremen, Germany
Contact:

Re: RB960PGS + POE cisco meraki mr33

Thu Dec 07, 2017 12:25 pm

I'd bet it's the voltage.
the mr33 needs at least 37V
You're powering your hEX PoE with 12V. AFAIR there's no up-stepping. Power your device with at least 37 Volts and it should work.
And from my experience with the mr33, better go with 48V directly (they can be divas when running at the lower end of the supported voltage range).
-Chris
Christopher Diedrich
MTCNA, MTCUME, MTCWE
Basel, Switzerland
Bremen, Germany

There are 10 types of people: Those who understand binary and those who don't.
There are two types of people: Those who can extrapolate from incomplete data
 
markom
Member Candidate
Member Candidate
Topic Author
Posts: 105
Joined: Thu Dec 17, 2009 10:42 pm

Re: RB960PGS + POE cisco meraki mr33

Thu Dec 07, 2017 1:07 pm

TY this is closed

Who is online

Users browsing this forum: No registered users and 104 guests